• 한국분말재료학회지
• /
• 제10권1호
• /
• pp.46-50
• /
• 2003

Lee et al. reported that a mixture of Cu and Ta, the combination of which is characterized by a positive heat of mixing, $\{Delta}H_{mix}$ of +2 kJ/㏖, can be amorphized by mechanical alloying(MA). It is our aim to investigate to what extent the MA is capable of producing a non-equilibrium phase with increasing the heat of mixing. The system chosen is the binary $Cu_{30}Mo_{70}$ with $\{Delta}H_{mix}$=+19 kJ/㏖. The mechanical alloying was carried out using a Fritsch P-5 planetary mill under Ar gas atmosphere. The vial and balls are made of Cu containing 1.8-2.0 wt.%Be to avoid contaminations arising mainly from Fe when steel balls and vial are used. The MA powders were characterized by the X-ray diffraction, EXAFS and thermal analysis. We conclude that two phase mixture of nanocrystalline fcc-Cu and bcc-Mo with grain size of 10 nm is formed by the ball-milling for a 3:7 mixture of pure Cu and Mo, the evidence for which has been deduced from the thermodynamic and structural analysis based on the DSC, X-ray diffraction and EXAFS spectra.

• 한국분말재료학회지
• /
• 제10권3호
• /
• pp.164-167
• /
• 2003

The mechanical alloying effect has been studied on the three Cu-based alloy systems with a positive heat of mixing. The extended bcc solid solution has been formed in the Cu-V system and an amorphous phase in the Cu-Ta system. However, it is round that a mixture of nanocrystalline Cu and Mo Is formed in the Cu-Mo system. The neutron diffraction has been employed at a main tool to characterize the detailed amorphization process. The formation of an amorphous phase in Cu-Ta system can be understood by assuming that the smaller Cu atoms preferentially enter into the bcc Ta lattice during ball milling.

• 한국물환경학회지
• /
• 제25권6호
• /
• pp.922-934
• /
• 2009

The transport of contaminants and spatial variation in a deep reservoir are certainly governed by the thermal structure of the reservoir. There has been continuous efforts to utilize three-dimensional (3D) hydrodynamic and water quality models for supporting reservoir management, but the efforts to validate the models performance using extensive field data were rare. The study was aimed to evaluate a 3D hydrodynamic model, ELCOM, in Daecheong Reservoir for simulating heat fluxes and stratification processes under hydrological years of 2001, 2006, 2008, and to assess the impact of internal wave on the reservoir mixing. The model showed satisfactory performance in simulating the water temperature profiles: the absolute mean errors at R3 (Hoenam) and R4 (Dam) sites were in the range of $1.38{\sim}1.682^{\circ}C$. The evaporative and sensible heat losses through the reservoir surface were maximum during August and January, respectively. The net heat flux ($H_n$) was positive from February to September, while the stratification formed from May and continued until September. Instant vertical mixing was observed in the reservoir during strong wind events at R4, and the model reasonably reproduced the mixing events. A digital low-pass filter and zero crossing method was used to evaluate the potential impact of wind-driven internal wave on the reservoir mixing. The results indicated that most of the wind events occurred in 2001, 2006, 2008 were not enough to develop persistent internal wave and effective mixing in the reservoir. ELCOM is a suitable 3D model for supporting water quality management of the deep and stratified reservoirs.

• Ocean Science Journal
• /
• 제43권3호
• /
• pp.147-152
• /
• 2008

The seasonal variability of sonic layer depth (SLD) in the central Arabian Sea (CAS) (0 to $25^{\circ}N$ and $62-66^{\circ}E$) was studied using the temperature and salinity (T/S) profiles from Argo floats for the years 2002-2006. The atmospheric forcing responsible for the observed changes was explored using the meteorological data from NCEP/NCAR and Quickscat winds. SLD was obtained from sound velocity profiles computed from T/S data. Net heat flux and wind forcing regulated SLD in the CAS. Up-welling and down-welling (Ekman dynamics) associated with the Findlater Jet controlled SLD during the summer monsoon. While in winter monsoon, cooling and convective mixing regulated SLD in the study region. Weak winds, high insolation and positive net heat flux lead to the formation of thin, warm and stratified sonic layer during pre and post summer monsoon periods, respectively.

• 한국재료학회지
• /
• 제4권6호
• /
• pp.620-625
• /
• 1994

자자들은 최근 비고용 Cu-Ta계의 기계적 합금화(Mechanical Alloying) 방법을 이용하여 이계에 있어서 비정질상의 형성에 대한 구조적 확인을 중성자 회절과 EXAFS(Extended X-ray Absorption Fine Structure)의 실험결과로 부터 얻었다. Cu-Ta계와 같이 혼합 엔탈피(Heat of Mixing: $\Delta$ Hmix)가 정인계에 있어서 비정질상 형성에 대한 연구는 구조적인 측면 뿐만 아니라. 시료의 전자물성에 대해서도 많은 연구가 되어야만 할 것으로 사료된다. 따라서 본 논문에서는 120시간 MA방법으로 제작한 시료에 대하여 초전도 천이온도 및 X선 광전자분광 실험에서 얻은 가전자대 구조의 전자물성을 측정하고, 그 결과로부터 이종원자 Cu와 Ta간의 결합은 화하결합에 의한 생성임을 확인하였는데, 이들 결과로부터 120시간 MA를 행하여 얻어진 시료는 확실하게 비정질 합금임을 알 수 있었다.

• 한국진공학회지
• /
• 제4권S2호
• /
• pp.148-155
• /
• 1995

(1) The metastable crystalline(MX) phases formed by ion mixing are classified into 5 types, i.e. the super-saturated solid solutions and the enlarged HCP-I phases reported earlier, and the newly observed FCC-I phases in hcp-based alloys, The FCC-ll and HCP-ll phases in bcc-based alloys. The growth kinetics of the MX phases is discussed. (2) The interfacial free energy in the multilayered films was found to play an important role in ion beam mixing(IM) induced amorphization. By adding sufficient interfaces, amorphous alloys were obtained even in the systems with rather positive heat of formation. (3) Gibbs free energy diagrams of some representative systems were constructed, by calculating the free energy curves of all the competing phases. Steady-state thermal annealing was conducted and the results confirmed the relevance of the constructed diagrams, which were inturn employed to interpret the MX phase formation as well as the glass forming ability upon IM in the binary metal systems.

• 한국분말재료학회지
• /
• 제6권4호
• /
• pp.314-319
• /
• 1999

The solid state reaction by mechanical alloying(MA) generally proceeds by lowering the free energy as the result of a chemical reaction at the interface between the two adjacent layers. However, Lee et $al.^{1-5)}$ reported that a mixture of Cu and Ta, the combination of which is characterized by a positive heat of mixing of +2kJ/mol, could be amorphized by mechanical alloying. This implies that there exists an up-hill process to raise the free energy of a mixture of pure Cu and la to that of an amorphous phase. It is our aim to investigate to what extent the MA is capable of producing a non-equilibrium phase with increasing the heat of mixing. The system chosen was the ternary $Cu_{30}Ta_{ 70-x}Mo_ x$ (x=35, 10). The mechanical alloying was carried out using a Fritsch P-5 planetary mill under Ar gas atmosphere. The MA powders were characterized by the X-ray diffraction with Cu-K $\alpha$ radiation, thermal analysis, electron diffraction and TEM micrographs. In the case of x=35, where pure Cu powders were mixed with equal amount of pure Ta and Mo powders, we revealed the formation of bcc solid solution after 150 h milling but its gradual decomposition by releasing fcc-Cu when milling time exceeded 200 h. However, an amorphous phase was clearly formed when the Mo content was lowered to x=10. It is believed that the amorphization of ternary $Cu_{30}Ta_{60}Mo_{10}$ powders is essentially identical to the solid state amorphization process in binary $Cu_{30}Ta_{70}$ powders.

• Applied Microscopy
• /
• 제45권2호
• /
• pp.52-57
• /
• 2015

Bulk metallic glass (BMG) shows higth strength, high elastic limit, corrosion resistance and good wear resistance and soft magnetic properties and has been considering as a candidate for new structural materials. But they show limited macroscopic plasticity and lack of tensile ductility due to highly localized shear deformation, which should be solved for real structural application. In this paper researches on the enhancement of plasticity of BMG were reviewed briefly. Introducing heterogeneous structure in glass is effective to induce more shear transformation zones (STZs) active for multiple shear band initiation and also to block the propagating shear band. Several methods such as BMG alloy design for high Poisson's ratio, addition of alloying element having positive heat of mixing, pre-straining BMG and variety of BMG composites have been developed for homogenous distribution of locally weak region, where local strain can be initiated. Therefore enhancement of plasticity of BMG is normally accompanied with some penalty of strength loss.

• 한국재료학회지
• /
• 제14권5호
• /
• pp.348-352
• /
• 2004

The mechanical alloying (MA) effect in immiscible V-Cu system with positive heat of mixing was studied by not only the neutron and X-ray diffraction but also the analysis of DSC spectra. The total energy, ΔHt accumulated during MA for the mixture of $V_{50}$ $Cu_{50}$ / powders increased with milling time and approached the saturation value of 14 kJ/mol after 120 h of milling. It can be seen that the free energy difference between the amorphous phase and the pure V and Cu powders with an atomic ratio 5:5 is estimated to be 11 kJ/mol by Miedema et al. This is thermodynamically taken as one of the evidences for the amorphization. The structural changes of V-Cu MA powders were characterized by the X-ray diffraction and neutron diffraction. We take a full advantage of a negligibly small scattering length of the V atom in the neutron diffraction measurement. The neutron diffraction data definitely indicate that the amorphization proceeds gradually but incompletely even after 120 h of MA and bcc-Cu Bragg peaks appears after 60 h of MA.

• 한국식품영양과학회지
• /
• 제42권3호
• /
• pp.457-463
• /
• 2013

Dressing 가공공정에 대한 HACCP(Hazard Analysis Critical Control Point) 시스템 구축을 위하여 위해요소 분석을 실시하였다. 위해요소 분석은 주원료, 용수, 미생물 평가, 작업장별 공중 낙하균과 종업원에 대한 병원성 미생물 검사를 하였다. 충청북도 진천 소재의 SJ 회사에서 2012년 4월 1일부터 30일까지 30일 동안 수행하였다. 그 결과 원료의 미생물은 5회 동안 검출되지 않았으며, 작업장 I과 작업장 II, 포장실, 세척용수, 검사실에서 사용된 용수의 총균수는 $3.0{\times}10^1$ CFU/mL 이하로 검출되었다. 드레싱 생산과정 중 열처리 및 혼합 과정에서 총균수는 평균 $3{\times}10$ CFU/mL가 검출되었으나 대장균과 진균류, 병원성 미생물은 검출되지 않았다. 공중 낙하균(총균수와 진균류)은 각각의 작업장에서 법적 허용치 이하로 검출되었다. 작업자들의 총균수 미생물 평가에서 모두 양성반응이었으나 대장균과 황색포도상구균은 검출되지 않았다. 결론적으로 위생관리 기준은 HACCP 시스템을 위한 미생물의 한계기준과 일반세균과 병원성 미생물과 같은 위해요소를 예방 및 감소시키기 위하여 설정하여야 한다.