• Journal of the Korean association of regional geographers
• /
• v.3 no.2
• /
• pp.163-193
• /
• 1997

Medical services are a fundamental and essential service in all urban areas. The location and accessibility of medical service facilities and institutions are critical to the diagnosis, control and prevention of illness and disease. The purpose of this paper is to present the results of a study on the location of medical facilities in Kwangju and the utilization of these facilities by the inhabitants. The following information is a summary of the findings: (1) Korea, like many countries, is now witnessing an increase in the age of its population as a result of higher living standards and better medical services. Korea is also experiencing a rapid increase in health care costs. To ensure easy access to medical consultation, diagnosis and treatment by individuals, the hierarchical efficient location of medical facilities, low medical costs, equalized medical services, preventive medical care is important. (2) In Korea, the quality of medical services has improved significantly as evident by the increased number of medical facilities and medical personnel. However, there is still a need for not only quantitative improvements but also for a more equitable distribution of and location of medical services. (3) There are 503 medical facilities in Kwangju each with a need to service 2,556 people. This is below the national average of 1,498 inhabitants per facility. The higher locational quotient and satisfactory population per medical facility showed at the civic center. On the other hand, problem regions such as the traditional residential area in Buk-Gu, Moo-deung mountain area and the outer areas of west Kwangju still maintain rural characteristics. (4) In the study area there are 86 general medicine clinics which provide basic medical services. i. e. one clinic per every 14,949 residents. As a basic service, its higher locational quotient showed in the residential area. The lower population concentration per clinic was found in the civic center and in the former town center, Songjeong-dong. In recently build residential areas and in the civic center, the lack of general medicine clinics is not a serious medical services issue because of the surplus of medical specialists in Korea. People are inclined to seek a consultation with a specialist in specific fields rather than consult a general practitioner. As a result of this phenomenon, there are 81 internal medicine facilities. Of these, 32.1% provide services to people who are not referred by a primary care physician but who self-diagnose then choose a medical facility specializing in what they believe to be their health problem. Areas in the city, called dongs, without any internal facilities make up 50% of the total 101 dongs. (5) There are 78 surgical facilities within the area, and there is little difference at the locational appearance from internal medicine facilities. There are also 71 pediatric health clinics for people under 15 years of age in this area, represents one clinic per 5,063 people. On the quantitative aspect, this is a positive situation. Accessibility is the most important facility choice factor, so it should be evenly located in proportion to demander distribution. However, 61% of 102 dongs have no pediatric clinics because of the uneven location. (6) There are 43 obstetrical and gynecological clinics in Kwangju, and the number of residents being served per clinic is 15,063. These services need to be given regularly so it should increase the numbers. There are 37 ENT clinics in the study area with the lower concentration in Dong-gu (32.4%) making no locational differences by dong. There are 23 dermatology clinics with the largest concentration in Dong-Gu. There are 17 ophthalmic clinics concentrated in the residential area because of the primary function of this type of specialization. (7) The use of general medicine clinics, internal medicine clinics, pediatric clinics, ENT clinics by the inhabitants indicate a trend toward primary or routine medical services. Obstetrics and gynecology clinics are used on a regular basis. In choosing a general medicine clinic, internal medicine clinic, pediatric clinic, and a ENT clinic, accessibility is the key factor while choice of a general hospital, surgery clinic, or an obstetrics and gynecology clinic, thes faith and trust in the medical practitioner is the priority consideration. (8) I considered the efficient use of medical facilities in the aspect of locational and management and suggest the following: First, primary care facilities should be evenly distributed in every area. In Kwangju, the number of medical facilities is the lowest among the six largest cities in Korea. Moreover, they are concentrated in Dong-gu and in newly developed areas. The desired number of medical facilities should be within 30 minutes of each person's home. For regional development there is a need to develop a plan to balance, for example, taxes and funds supporting personnel, equipment and facilities. Secondly, medical services should be co-ordinated to ensure consistent, appropriate, quality services. Primary medical facilities should take charge of out-patient activities, and every effort should be made to standardize and equalize equipment and facility resources and to ensure ongoing development and training in the primary services field. A few specialty medical facilities and general hospitals should establish a priority service for incurable and terminally ill patients. (9) The management scheme for the inhabitants' efficient use of medical service is as follows: The first task is to efficiently manage medical facilities and related services. Higher quality of medical services can be accomplished within the rapidly changing medical environment. A network of social, administrative and medical organizations within an area should be established to promote information gathering and sharing strategies to better assist the community. Statistics and trends on the rate or occurrence of diseases, births, deaths, medical and environment conditions of the poor or estranged people should be maintained and monitored. The second task is to increase resources in the area of disease prevention and health promotion. Currently the focus is on the treatment and care of individuals with illness or disease. A strong emphasis should also be placed on promoting prevention of illness and injury within the community through not only public health offices but also via medical service facilities. Home medical care should be established and medical testing centers should be located as an ordinary service level. Also, reduced medical costs for the physically handicapped, cardiac patients, and mentally ill or handicapped patients should be considered.

• Korean small business review
• /
• v.32 no.1
• /
• pp.65-87
• /
• 2010

With the advent of knowledge-based society, the revitalization of technological innovation type SMEs, termed "inno-biz" hereafter, has been globally recognized as a government policymakers' primary concern in strengthening national competitiveness, and much effort is being put into establishing polices of boosting the start-ups and innovation capability of SMEs. Especially, in that the inno-biz enables national economy to get vitalized by widening world markets with its superior technology, and thus, taking the initiative of extremely competitive world markets, its growth and development has greater significance. In the case of Korea, the government has been maintaining the policies since the late 1990s of stimulating the growth of SMEs as well as building various infrastructures to foster the start-ups of the SMEs such as venture businesses with high technology. In addition, since the enactment of "Innovation Promotion Law for SMEs" in 2001, the government has been accelerating the policies of prioritizing the growth and development of inno-biz. So, for the sound growth and development of Korean inno-biz, this paper intends to offer effective management strategies for SMEs and suggest proper policies for the government, by researching into the effect of technological innovation capability and technology commercialization capability as the primary business resources on business performance in Korean SMEs in the light of market information orientation. The research is carried out on Korean companies characterized as inno-biz. On the basis of OSLO manual and prior studies, the research categorizes their status. R&D capability, technology accumulation capability and technological innovation system are categorized into technological innovation capability; product development capability, manufacturing capability and marketing capability into technology commercialization capability; and increase in product competitiveness and merits for new technology and/or product development into business performance. Then the effect of each component on business performance is substantially analyzed. In addition, the mediation effect of technological innovation and technology commercialization capability on business performance is observed by the use of the market information orientation as a parameter. The following hypotheses are proposed. H1 : Technology innovation capability will positively influence business performance. H1-1 : R&D capability will positively influence product competitiveness. H1-2 : R&D capability will positively influence merits for new technology and/or product development into business performance. H1-3 : Technology accumulation capability will positively influence product competitiveness. H1-4 : Technology accumulation capability will positively influence merits for new technology and/or product development into business performance. H1-5 : Technological innovation system will positively influence product competitiveness. H1-6 : Technological innovation system will positively influence merits for new technology and/or product development into business performance. H2 : Technology commercializing capability will positively influence business performance. H2-1 : Product development capability will positively influence product competitiveness. H2-2 : Product development capability will positively influence merits for new technology and/or product development into business performance. H2-3 : Manufacturing capability will positively influence product competitiveness. H2-4 : Manufacturing capability will positively influence merits for new technology and/or product development into business performance. H2-5 : Marketing capability will positively influence product competitiveness. H2-6 : Marketing capability will positively influence merits for new technology and/or product development into business performance. H3 : Technology innovation capability will positively influence market information orientation. H3-1 : R&D capability will positively influence information generation. H3-2 : R&D capability will positively influence information diffusion. H3-3 : R&D capability will positively influence information response. H3-4 : Technology accumulation capability will positively influence information generation. H3-5 : Technology accumulation capability will positively influence information diffusion. H3-6 : Technology accumulation capability will positively influence information response. H3-7 : Technological innovation system will positively influence information generation. H3-8 : Technological innovation system will positively influence information diffusion. H3-9 : Technological innovation system will positively influence information response. H4 : Technology commercialization capability will positively influence market information orientation. H4-1 : Product development capability will positively influence information generation. H4-2 : Product development capability will positively influence information diffusion. H4-3 : Product development capability will positively influence information response. H4-4 : Manufacturing capability will positively influence information generation. H4-5 : Manufacturing capability will positively influence information diffusion. H4-6 : Manufacturing capability will positively influence information response. H4-7 : Marketing capability will positively influence information generation. H4-8 : Marketing capability will positively influence information diffusion. H4-9 : Marketing capability will positively influence information response. H5 : Market information orientation will positively influence business performance. H5-1 : Information generation will positively influence product competitiveness. H5-2 : Information generation will positively influence merits for new technology and/or product development into business performance. H5-3 : Information diffusion will positively influence product competitiveness. H5-4 : Information diffusion will positively influence merits for new technology and/or product development into business performance. H5-5 : Information response will positively influence product competitiveness. H5-6 : Information response will positively influence merits for new technology and/or product development into business performance. H6 : Market information orientation will mediate the relationship between technology innovation capability and business performance. H7 : Market information orientation will mediate the relationship between technology commercializing capability and business performance. The followings are the research results : First, as for the effect of technological innovation on business performance, the technology accumulation capability and technological innovating system have a positive effect on increase in product competitiveness and merits for new technology and/or product development, while R&D capability has little effect on business performance. Second, as for the effect of technology commercialization capability on business performance, the effect of manufacturing capability is relatively greater than that of merits for new technology and/or product development. Third, the mediation effect of market information orientation is identified to exist partially in information generation, information diffusion and information response. Judging from these results, the following analysis can be made : On Increase in product competitiveness, directly related to successful technology commercialization of technology, management capability including technological innovation system, manufacturing capability and marketing capability has a relatively strong effect. On merits for new technology and/or product development, on the other hand, capability in technological aspect including R&D capability, technology accumulation capability and product development capability has relatively strong effect. Besides, in the cast of market information orientation, the level of information diffusion within an organization plays and important role in new technology and/or product development. Also, for commercial success like increase in product competitiveness, the level of information response is primarily required. Accordingly, the following policies are suggested : First, as the effect of technological innovation capability and technology commercialization capability on business performance differs among SMEs; in order for SMEs to secure competitiveness, the government has to establish microscopic policies for SMEs which meet their needs and characteristics. Especially, the SMEs lacking in capital and labor are required to map out management strategies of focusing their resources primarily on their strengths. And the government needs to set up policies for SMEs, not from its macro-scaled standpoint, but from the selective and concentrative one that meets the needs and characteristics of respective SMEs. Second, systematic infrastructures are urgently required which lead technological success to commercial success. Namely, as technological merits at respective SME levels do not always guarantee commercial success, the government should make and effort to build systematic infrastructures including encouragement of M&A or technology trade, systematic support for protecting intellectual property, furtherance of business incubating and industrial clusters for strengthening academic-industrial network, and revitalization of technology financing, in order to make successful commercialization from technological success. Finally, the effort to innovate technology, R&D, for example, is essential to future national competitiveness, but its result is often prolonged. So the government needs continuous concern and funding for basic science, in order to maximize technological innovation capability. Indeed the government needs to examine continuously whether technological innovation capability or technological success leads satisfactorily to commercial success in market economic system. It is because, when the transition fails, it should be left to the government.

• 한국균학회소식:학술대회논문집
• /
• 2015.05a
• /
• pp.45-46
• /
• 2015

Clubroot disease of crucifers has occurred since 1957. It has spread to the whole China, especially in the southwest and nourtheast where it causes 30-80% loss in some fields. The disease has being expanded in the recent years as seeds are imported and the floating seedling system practices. For its effective control, the Ministry of Agriculture of China set up a program in 2010 and a research team led by Dr. Yueqiu HE, Yunnan Agricultural University. The team includes 20 main reseachers of 11 universities and 5 institutions. After 5 years, the team has made a lot of progresses in disease occurrence regulation, resources collection, resistance identification and breeding, biological agent exploration, formulation, chemicals evaluation, and control strategy. About 1200 collections of local and commercial crucifers were identified in the field and by artificiall inoculation in the laboratories, 10 resistant cultivars were breeded including 7 Chinese cabbages and 3 cabbages. More than 800 antagostic strains were isolated including bacteria, stretomyces and fungi. Around 100 chemicals were evaluated in the field and greenhouse based on its control effect, among them, 6 showed high control effect, especially fluazinam and cyazofamid could control about 80% the disease. However, fluzinam has negative effect on soil microbes. Clubroot disease could not be controlled by bioagents and chemicals once when the pathogen Plasmodiophora brassicae infected its hosts and set up the parasitic relationship. We found the earlier the pathogent infected its host, the severer the disease was. Therefore, early control was the most effective. For Chinese cabbage, all controlling measures should be taken in the early 30 days because the new infection could not cause severe symptom after 30 days of seeding. For example, a biocontrol agent, Bacillus subtilis Strain XF-1 could control the disease 70%-85% averagely when it mixed with seedling substrate and was drenching 3 times after transplanting, i.e. immediately, 7 days, 14 days. XF-1 has been deeply researched in control mechanisms, its genome, and development and application of biocontrol formulate. It could produce antagonistic protein, enzyme, antibiotics and IAA, which promoted rhizogenesis and growth. Its The genome was sequenced by Illumina/Solexa Genome Analyzer to assembled into 20 scaffolds then the gaps between scaffolds were filled by long fragment PCR amplification to obtain complet genmone with 4,061,186 bp in size. The whole genome was found to have 43.8% GC, 108 tandem repeats with an average of 2.65 copies and 84 transposons. The CDSs were predicted as 3,853 in which 112 CDSs were predicted to secondary metabolite biosynthesis, transport and catabolism. Among those, five NRPS/PKS giant gene clusters being responsible for the biosynthesis of polyketide (pksABCDEFHJLMNRS in size 72.9 kb), surfactin(srfABCD, 26.148 kb, bacilysin(bacABCDE 5.903 kb), bacillibactin(dhbABCEF, 11.774 kb) and fengycin(ppsABCDE, 37.799 kb) have high homolgous to fuction confirmed biosynthesis gene in other strain. Moreover, there are many of key regulatory genes for secondary metabolites from XF-1, such as comABPQKX Z, degQ, sfp, yczE, degU, ycxABCD and ywfG. were also predicted. Therefore, XF-1 has potential of biosynthesis for secondary metabolites surfactin, fengycin, bacillibactin, bacilysin and Bacillaene. Thirty two compounds were detected from cell extracts of XF-1 by MALDI-TOF-MS, including one Macrolactin (m/z 441.06), two fusaricidin (m/z 850.493 and 968.515), one circulocin (m/z 852.509), nine surfactin (m/z 1044.656~1102.652), five iturin (m/z 1096.631~1150.57) and forty fengycin (m/z 1449.79~1543.805). The top three compositions types (contening 56.67% of total extract) are surfactin, iturin and fengycin, in which the most abundant is the surfactin type composition 30.37% of total extract and in second place is the fengycin with 23.28% content with rich diversity of chemical structure, and the smallest one is the iturin with 3.02% content. Moreover, the same main compositions were detected in Bacillus sp.355 which is also a good effects biocontol bacterial for controlling the clubroot of crucifer. Wherefore those compounds surfactin, iturin and fengycin maybe the main active compositions of XF-1 against P. brassicae. Twenty one fengycin type compounds were evaluate by LC-ESI-MS/MS with antifungal activities, including fengycin A $C_{16{\sim}C19}$, fengycin B $C_{14{\sim}C17}$, fengycin C $C_{15{\sim}C18}$, fengycin D $C_{15{\sim}C18}$ and fengycin S $C_{15{\sim}C18}$. Furthermore, one novel compound was identified as Dehydroxyfengycin $C_{17}$ according its MS, 1D and 2D NMR spectral data, which molecular weight is 1488.8480 Da and formula $C_{75}H_{116}N_{12}O_{19}$. The fengycin type compounds (FTCPs $250{\mu}g/mL$) were used to treat the resting spores of P. brassicae ($10^7/mL$) by detecting leakage of the cytoplasm components and cell destruction. After 12 h treatment, the absorbencies at 260 nm (A260) and at 280 nm (A280) increased gradually to approaching the maximum of absorbance, accompanying the collapse of P. brassicae resting spores, and nearly no complete cells were observed at 24 h treatment. The results suggested that the cells could be lyzed by the FTCPs of XF-1, and the diversity of FTCPs was mainly attributed to a mechanism of clubroot disease biocontrol. In the five selected medium MOLP, PSA, LB, Landy and LD, the most suitable for growth of strain medium is MOLP, and the least for strains longevity is the Landy sucrose medium. However, the lipopeptide highest yield is in Landy sucrose medium. The lipopeptides in five medium were analyzed with HPLC, and the results showed that lipopeptides component were same, while their contents from B. subtilis XF-1 fermented in five medium were different. We found that it is the lipopeptides content but ingredients of XF-1 could be impacted by medium and lacking of nutrition seems promoting lipopeptides secretion from XF-1. The volatile components with inhibition fungal Cylindrocarpon spp. activity which were collect in sealed vesel were detected with metheds of HS-SPME-GC-MS in eight biocontrol Bacillus species and four positive mutant strains of XF-1 mutagenized with chemical mutagens, respectively. They have same main volatile components including pyrazine, aldehydes, oxazolidinone and sulfide which are composed of 91.62% in XF-1, in which, the most abundant is the pyrazine type composition with 47.03%, and in second place is the aldehydes with 23.84%, and the third place is oxazolidinone with 15.68%, and the smallest ones is the sulfide with 5.07%.

• Journal of Intelligence and Information Systems
• /
• v.20 no.4
• /
• pp.89-105
• /
• 2014

After emergence of Internet, social media with highly interactive Web 2.0 applications has provided very user friendly means for consumers and companies to communicate with each other. Users have routinely published contents involving their opinions and interests in social media such as blogs, forums, chatting rooms, and discussion boards, and the contents are released real-time in the Internet. For that reason, many researchers and marketers regard social media contents as the source of information for business analytics to develop business insights, and many studies have reported results on mining business intelligence from Social media content. In particular, opinion mining and sentiment analysis, as a technique to extract, classify, understand, and assess the opinions implicit in text contents, are frequently applied into social media content analysis because it emphasizes determining sentiment polarity and extracting authors' opinions. A number of frameworks, methods, techniques and tools have been presented by these researchers. However, we have found some weaknesses from their methods which are often technically complicated and are not sufficiently user-friendly for helping business decisions and planning. In this study, we attempted to formulate a more comprehensive and practical approach to conduct opinion mining with visual deliverables. First, we described the entire cycle of practical opinion mining using Social media content from the initial data gathering stage to the final presentation session. Our proposed approach to opinion mining consists of four phases: collecting, qualifying, analyzing, and visualizing. In the first phase, analysts have to choose target social media. Each target media requires different ways for analysts to gain access. There are open-API, searching tools, DB2DB interface, purchasing contents, and so son. Second phase is pre-processing to generate useful materials for meaningful analysis. If we do not remove garbage data, results of social media analysis will not provide meaningful and useful business insights. To clean social media data, natural language processing techniques should be applied. The next step is the opinion mining phase where the cleansed social media content set is to be analyzed. The qualified data set includes not only user-generated contents but also content identification information such as creation date, author name, user id, content id, hit counts, review or reply, favorite, etc. Depending on the purpose of the analysis, researchers or data analysts can select a suitable mining tool. Topic extraction and buzz analysis are usually related to market trends analysis, while sentiment analysis is utilized to conduct reputation analysis. There are also various applications, such as stock prediction, product recommendation, sales forecasting, and so on. The last phase is visualization and presentation of analysis results. The major focus and purpose of this phase are to explain results of analysis and help users to comprehend its meaning. Therefore, to the extent possible, deliverables from this phase should be made simple, clear and easy to understand, rather than complex and flashy. To illustrate our approach, we conducted a case study on a leading Korean instant noodle company. We targeted the leading company, NS Food, with 66.5% of market share; the firm has kept No. 1 position in the Korean "Ramen" business for several decades. We collected a total of 11,869 pieces of contents including blogs, forum contents and news articles. After collecting social media content data, we generated instant noodle business specific language resources for data manipulation and analysis using natural language processing. In addition, we tried to classify contents in more detail categories such as marketing features, environment, reputation, etc. In those phase, we used free ware software programs such as TM, KoNLP, ggplot2 and plyr packages in R project. As the result, we presented several useful visualization outputs like domain specific lexicons, volume and sentiment graphs, topic word cloud, heat maps, valence tree map, and other visualized images to provide vivid, full-colored examples using open library software packages of the R project. Business actors can quickly detect areas by a swift glance that are weak, strong, positive, negative, quiet or loud. Heat map is able to explain movement of sentiment or volume in categories and time matrix which shows density of color on time periods. Valence tree map, one of the most comprehensive and holistic visualization models, should be very helpful for analysts and decision makers to quickly understand the "big picture" business situation with a hierarchical structure since tree-map can present buzz volume and sentiment with a visualized result in a certain period. This case study offers real-world business insights from market sensing which would demonstrate to practical-minded business users how they can use these types of results for timely decision making in response to on-going changes in the market. We believe our approach can provide practical and reliable guide to opinion mining with visualized results that are immediately useful, not just in food industry but in other industries as well.

• Journal of Distribution Science
• /
• v.9 no.2
• /
• pp.111-122
• /
• 2011

The purpose of this study is to survey the successful cases of small and medium Business Systematization Cognition by examining their entrepreneurial characteristics and analysing the factors affecting their success. To that end, previous studies on the association types of small businesses were studied. A research model was developed, and research hypotheses for an empirical analysis were established upon it. Suh et al. (2010) insist on the importance of Small Business Systematization in Korea but also show that small business performance is suffering: they are too small to stand alone. That is why association is so crucial for them: they must stand together. Unfortunately, association is difficult, as they have few specific links and little motivation. Even in franchising networks, association tends to be initiated by big franchisers, not small ones. In that sense, association among small businesses is crucial for their long-term survival. With this in mind, this study examines how they think and feel about the issue of 'Industrial Classification', how important Industrial Classification is to their business success, and what kinds of problems it raises in the markets. This study seeks the different cognitions among the association types of small businesses from the perspectives of participation motivation, systematization expectation, policy demand level, and management performance. We assume that different industrial classification types of small businesses will have different cognitions concerning these factors. There are four basic industrial classification types of small businesses: retail sales, restaurant, service, and manufacturing. To date, most of the studies in this area have focused on collecting data on the external environments of small businesses or performing statistical analyses on their status. In this study, we surveyed 4 market areas in Busan, Masan, and Changwon in Korea, where business associations consist of merchants, shop owners, and traders. We surveyed 330 shops and merchants by sending a questionnaire or visiting. Finally, 268 questionnaires were collected and used for the analysis. An ANOVA, T-test, and regression analyses were conducted to test the research hypotheses. The results demonstrate that there are differences in cognition depending upon the industrial classification type. Restaurants generally have a higher cognition concerning job offer problems and a lower cognition concerning their competitiveness. Restaurants also depend more on systematization expectation than do the other industrial classification types. On the policy demand level, restaurants have a higher cognition. This study identifies several factors that are contributing to management performance through differences in cognition that depend upon association type: systematization expectation and policy demand level have positive effects on management performance; participation motivation has a negative effect on management performance. We confirm also that the image factors of different cognitions are linked to an awareness of the value of systematization and that these factors show sequential and continual patterns in the course of generating performances. In conclusion, this study carries significant implications in its classifying of small businesses into the four different associational types (retail sales, restaurant, services, and manufacturing). We believe our study to be the first one to conduct an empirical survey in this subject area. More studies in this area will likely use our research frameworks. The data show that regionally based industrial classification associations such as those in rural cities or less developed areas tend to suffer more problems than those in urban areas. Moreover, restaurants suffer more problems than the norm. Most of the problems raised in this study concern the act of 'associating itself'. Most associations have serious difficulties in associating. On the other hand, the area where they have the least policy demand is that of service types. This study contributes to the argument that associating, rather than financial assistance or management consulting, promotes the start-up and managerial performance of small businesses. This study also has some limitations. The main limitation is the number of questionnaires. We could not survey all the industrial classification types across the country because of budget and time limitations. If we had, we could have produced many more useful results and enhanced the precision of our analysis. The history of systemization is very short and the number of industrial classification associations is relatively low in Korea. We should keep in mind, though, that this is very crucial to systemization entrepreneurs starting their businesses, as it can heavily affect their chances of success. Being strongly associated with each other might be critical to the business success of industrial classification members. Thus, the government needs to put more effort and resources into supporting the drive of industrial classification members to become more strongly associated.

• Korean Journal of Weed Science
• /
• v.13 no.4
• /
• pp.210-233
• /
• 1993

The herbicide has become indispensable as much as nitrogen fertilizer in Korean agriculture from 1970 onwards. It is estimated that in 1991 more than 40 herbicides were registered for rice crop and treated to an area 1.41 times the rice acreage ; more than 30 herbicides were registered for field crops and treated to 89% of the crop area ; the treatment acreage of 3 non-selective foliar-applied herbicides reached 2,555 thousand hectares. During the last 25 years herbicides have benefited the Korean farmers substantially in labor, cost and time of farming. Any herbicide which causes crop injury in ordinary uses is not allowed to register in most country. Herbicides, however, can cause crop injury more or less when they are misused, abused or used under adverse environments. The herbicide use more than 100% of crop acreage means an increased probability of which herbicides are used wrong or under adverse situation. This is true as evidenced by that about 25% of farmers have experienced the herbicide caused crop injury more than once during last 10 years on authors' nationwide surveys in 1992 and 1993 ; one-half of the injury incidences were with crop yield loss greater than 10%. Crop injury caused by herbicide had not occurred to a serious extent in the 1960s when the herbicides fewer than 5 were used by farmers to the field less than 12% of total acreage. Farmers ascribed about 53% of the herbicidal injury incidences at their fields to their misuses such as overdose, careless or improper application, off-time application or wrong choice of the herbicide, etc. While 47% of the incidences were mainly due to adverse natural conditions. Such misuses can be reduced to a minimum through enhanced education/extension services for right uses and, although undesirable, increased farmers' experiences of phytotoxicity. The most difficult primary problem arises from lack of countermeasures for farmers to cope with various adverse environmental conditions. At present almost all the herbicides have"Do not use!" instructions on label to avoid crop injury under adverse environments. These "Do not use!" situations Include sandy, highly percolating, or infertile soils, cool water gushing paddy, poorly draining paddy, terraced paddy, too wet or dry soils, days of abnormally cool or high air temperature, etc. Meanwhile, the cultivated lands are under poor conditions : the average organic matter content ranges 2.5 to 2.8% in paddy soil and 2.0 to 2.6% in upland soil ; the canon exchange capacity ranges 8 to 12 m.e. ; approximately 43% of paddy and 56% of upland are of sandy to sandy gravel soil ; only 42% of paddy and 16% of upland fields are on flat land. The present situation would mean that about 40 to 50% of soil applied herbicides are used on the field where the label instructs "Do not use!". Yet no positive effort has been made for 25 years long by government or companies to develop countermeasures. It is a really sophisticated social problem. In the 1960s and 1970s a subside program to incoporate hillside red clayish soil into sandy paddy as well as campaign for increased application of compost to the field had been operating. Yet majority of the sandy soils remains sandy and the program and campaign had been stopped. With regard to this sandy soil problem the authors have developed a method of "split application of a herbicide onto sandy soil field". A model case study has been carried out with success and is introduced with key procedure in this paper. Climate is variable in its nature. Among the climatic components sudden fall or rise in temperature is hardly avoidable for a crop plant. Our spring air temperature fluctuates so much ; for example, the daily mean air temperature of Inchon city varied from 6.31 to $16.81^{\circ}C$ on April 20, early seeding time of crops, within${\times}$2Sd range of 30 year records. Seeding early in season means an increased liability to phytotoxicity, and this will be more evident in direct water-seeding of rice. About 20% of farmers depend on the cold underground-water pumped for rice irrigation. If the well is deep over 70m, the fresh water may be about $10^{\circ}C$ cold. The water should be warmed to about $20^{\circ}C$ before irrigation. This is not so practiced well by farmers. In addition to the forementioned adverse conditions there exist many other aspects to be amended. Among them the worst for liquid spray type herbicides is almost total lacking in proper knowledge of nozzle types and concern with even spray by the administrative, rural extension officers, company and farmers. Even not available in the market are the nozzles and sprayers appropriate for herbicides spray. Most people perceive all the pesticide sprayers same and concern much with the speed and easiness of spray, not with correct spray. There exist many points to be improved to minimize herbicidal phytotoxicity in Korea and many ways to achieve the goal. First of all it is suggested that 1) the present evaluation of a new herbicide at standard and double doses in registration trials is to be an evaluation for standard, double and triple doses to exploit the response slope in making decision for approval and recommendation of different dose for different situation on label, 2) the government is to recognize the facts and nature of the present problem to correct the present misperceptions and to develop an appropriate national program for improvement of soil conditions, spray equipment, extention manpower and services, 3) the researchers are to enhance researches on the countermeasures and 4) the herbicide makers/dealers are to correct their misperceptions and policy for sales, to develop database on the detailed use conditions of consumer one by one and to serve the consumers with direct counsel based on the database.

• Journal of Global Scholars of Marketing Science
• /
• v.18 no.4
• /
• pp.195-215
• /
• 2008

The scarcity is pervasive aspect of human life and is a fundamental precondition of economic behavior of consumers. Also, the effect of scarcity message is a power social influence principle used by marketers to increase the subjective desirability of products. Because valuable objects are often scare, consumers tend to infer the scarce objects are valuable. Marketers often do base promotional appeals on the principle of scarcity to increase the subjective desirability their products among consumers. Specially, advertisers and retailers often promote their products using restrictions. These restriction act to constraint consumers' ability th take advantage of the promotion and can assume several forms. For example, some promotions are advertised as limited time offers, while others limit the quantity that can be bought at the deal price by employing the statements such as 'limit one per consumer,' 'limit 5 per customer,' 'limited products for special commemoration celebration,' Some retailers use statements extensively. A recent weekly flyer by a prominent retailer limited purchase quantities on 50% of the specials advertised on front page. When consumers saw these phrase, they often infer value from the product that has limited availability or is promoted as being scarce. But, the past researchers explored a direct relationship between the purchase quantity and time limit on deal purchase intention. They also don't explored that all restriction message are not created equal. Namely, we thought that different restrictions signal deal value in different ways or different mechanism. Consumers appear to perceive that time limits are used to attract consumers to the brand, while quantity limits are necessary to reduce stockpiling. This suggests other possible differences across restrictions. For example, quantity limits could imply product quality (i.e., this product at this price is so good that purchases must be limited). In contrast, purchase preconditions force the consumer to spend a certain amount to qualify for the deal, which suggests that inferences about the absolute quality of the promoted item would decline from purchase limits (highest quality) to time limits to purchase preconditions (lowest quality). This might be expected to be particularly true for unfamiliar brands. However, a critical but elusive issue in scarcity message research is the impacts of a inferred motives on the promoted scarcity message. The past researchers not explored possibility of inferred motives on the scarcity message context. Despite various type to the quantity limits message, they didn't separated scarcity message among the quantity limits. Therefore, we apply a stricter definition of scarcity message(i.e. quantity limits) and consider scarcity message type(general scarcity message vs. special scarcity message), scarcity depth(high vs. low). The purpose of this study is to examine the effect of the scarcity message on the consumer's purchase intension. Specifically, we investigate the effect of general versus special scarcity messages on the consumer's purchase intention using the level of the scarcity depth as moderators. In other words, we postulates that the scarcity message type and scarcity depth play an essential moderating role in the relationship between the inferred motives and purchase intention. In other worlds, different from the past studies, we examine the interplay between the perceived motives and scarcity type, and between the perceived motives and scarcity depth. Both of these constructs have been examined in isolation, but a key question is whether they interact to produce an effect in reaction to the scarcity message type or scarcity depth increase. The perceived motive Inference behind the scarcity message will have important impact on consumers' reactions to the degree of scarcity depth increase. In relation ti this general question, we investigate the following specific issues. First, does consumers' inferred motives weaken the positive relationship between the scarcity depth decrease and the consumers' purchase intention, and if so, how much does it attenuate this relationship? Second, we examine the interplay between the scarcity message type and the consumers' purchase intention in the context of the scarcity depth decrease. Third, we study whether scarcity message type and scarcity depth directly affect the consumers' purchase intention. For the answer of these questions, this research is composed of 2(intention inference: existence vs. nonexistence)${\times}2$(scarcity type: special vs. general)${\times}2$(scarcity depth: high vs. low) between subject designs. The results are summarized as follows. First, intention inference(inferred motive) is not significant on scarcity effect in case of special scarcity message. However, nonexistence of intention inference is more effective than existence of intention inference on purchase intention in case of general scarcity. Second, intention inference(inferred motive) is not significant on scarcity effect in case of low scarcity. However, nonexistence of intention inference is more effective than existence of intention inference on purchase intention in case of high scarcity. The results of this study will help managers to understand the relative importance among the type of the scarcity message and to make decisions in using their scarcity message. Finally, this article have several contribution. First, we have shown that restrictions server to activates a mental resource that is used to render a judgment regarding a promoted product. In the absence of other information, this resource appears to read to an inference of value. In the presence of other value related cue, however, either database(i.e., scarcity depth: high vs. low) or conceptual base(i.e.,, scarcity type special vs. general), the resource is used in conjunction with the other cues as a basis for judgment, leading to different effects across levels of these other value-related cues. Second, our results suggest that a restriction can affect consumer behavior through four possible routes: 1) the affective route, through making consumers feel irritated, 2) the cognitive making route, through making consumers infer motivation or attribution about promoted scarcity message, and 3) the economic route, through making the consumer lose an opportunity to stockpile at a low scarcity depth, or forcing him her to making additional purchases, lastly 4) informative route, through changing what consumer believe about the transaction. Third, as a note already, this results suggest that we should consider consumers' inferences of motives or attributions for the scarcity dept level and cognitive resources available in order to have a complete understanding the effects of quantity restriction message.

• Journal of Embryo Transfer
• /
• v.20 no.3
• /
• pp.239-253
• /
• 2005

Serum concentrations of Hanwoo steers and bulls as possible indicators of beef quality were analyzed to estimate their correlations with carcass traits. Blood samples were taken 2 months and right before shipping to abattoir and at the time of slaughter. And phenotypic correlation coefficients between serum concentrations and carcass traits were estimated. Beef yield index of steers was positively correlated with serum concentrations of total Protein (0.23), albumin (0.26), and calcium (0.31). But it was negatively co..elated with BUN (-0.30). Loin eye area was positively correlated with BUN (0.17) or with globulin (0.16). Back fat thickness was positively correlated with BUN (0.42) and inorganic phosphorus (0.20) being negatively correlated with total protein (-0.23), albumin (-0.33) and calcium (-0.33). Marbling score in the scale of 1 (scarcely marbled) through 9 (extremely marbled) was positively correlated with BUN (0.28) and negatively with IGF-I and calcium concentrations. Phenotype correlation coefficient of loin eye area with total protein concentration in the serum taken from steers right before shipment was estimated to be -0.16 and that with BUN was estimated to be -0.15. Serum concentrations of IGF, glucose, creatinine and on organic phosphorus from steers measured right before shipment were negatively correlated with respective correlation coefficient estimates as -0.21, -0.21, -0.19 and -0.18. Marbling score was negatively co..elated with serum creatinine (-0.16) measured at that time. Beef yield index of steers was positively correlated (0.31) with age adjusted calcium concentration in the serum taken at the time of slaughter. Correlation between body weight and BUN at slaughter was 0.17 At slaughter, loin eye area was negatively correlated with albumin (-0.19) and back fat thickness was also negatively correlated with age adjusted calcium concentration (-0.38). Marbling was negatively correlated with age adjusted calcium concentration(-0.17). Serum concentrations of testosterone, calcium and inorganic phosphorus taken in 2 months before slaughter were negatively but highly correlated with yield index(0.71, 0.67 and -0.71), respectively. Body weight at slaughter was positively was negatively correlated (0.67) with calcium level while dressing percentage was negatively (-0.69) correlated with serum glucose concentration, 2 months prior to slaughter. Correlation coefficients between back fat thickness and cortisol, between back fat thickness and inorganic phosphate were both positive (0.29 and 0.69). Marbling score was negatively correlated with creatinine (-0.81) and positively with BUN (0.87). Body weight loss during shipping was positively correlated with albumin and inorganic phosphate (0.77, 0.83). Yield index of bulls was positively correlated with serum testosterone concentration (0.66). Dressing percentage was positively and highly correlated with globulin (0.73). Back fat thickness of bulls, however, was negatively correlated with testosterone (-0.60). Loin eye area of bull carcasses was positively correlated with testosterone (0.40). Mar-blaine was negatively co..elated with creatinine (-0.55). Yield index of bulls and age adjusted HDLC concentration at slaughter was negatively correlated (-0.71). Dressing percentage of bulls was positively and highly correlated with globulin concentration (0.70). Back fat thickness was also positively correlated with HDLC (0.69) in the serum taken at slaughter. Correlation coefficients between carcass weight and triglyceride, between loin eye are and testosterone and between marbling score and creatinine or glucose were 0.51, -0.91 and -0.58, respectively.

• Journal of Global Scholars of Marketing Science
• /
• v.20 no.3
• /
• pp.239-248
• /
• 2010

This paper describes a collaborative project between academia and industry which focused on improving the marketing and product development strategies for two private label apparel brands of a large regional department store chain in the southeastern United States. The goal of the project was to revitalize product lines of the two brands by incorporating student ideas for new solutions, thereby giving the students practical experience with a real-life industry situation. There were a number of key players involved in the project. A privately-owned department store chain based in the southeastern United States which was seeking an academic partner had recognized a need to update two existing private label brands. They targeted middle-aged consumers looking for casual, moderately priced merchandise. The company was seeking to change direction with both packaging and presentation, and possibly product design. The branding and product development divisions of the company contacted professors in an academic department of a large southeastern state university. Two of the professors agreed that the task would be a good fit for their classes - one was a junior-level Intermediate Brand Management class; the other was a senior-level Fashion Product Development class. The professors felt that by working collaboratively on the project, students would be exposed to a real world scenario, within the security of an academic learning environment. Collaboration within an interdisciplinary team has the advantage of providing experiences and resources beyond the capabilities of a single student and adds "brainpower" to problem-solving processes (Lowman 2000). This goal of improving the capabilities of students directed the instructors in each class to form interdisciplinary teams between the Branding and Product Development classes. In addition, many universities are employing industry partnerships in research and teaching, where collaboration within temporal (semester) and physical (classroom/lab) constraints help to increase students' knowledge and experience of a real-world situation. At the University of Tennessee, the Center of Industrial Services and UT-Knoxville's College of Engineering worked with a company to develop design improvements in its U.S. operations. In this study, Because should be lower case b with a private label retail brand, Wickett, Gaskill and Damhorst's (1999) revised Retail Apparel Product Development Model was used by the product development and brand management teams. This framework was chosen because it addresses apparel product development from the concept to the retail stage. Two classes were involved in this project: a junior level Brand Management class and a senior level Fashion Product Development class. Seven teams were formed which included four students from Brand Management and two students from Product Development. The classes were taught the same semester, but not at the same time. At the beginning of the semester, each class was introduced to the industry partner and given the problem. Half the teams were assigned to the men's brand and half to the women's brand. The teams were responsible for devising approaches to the problem, formulating a timeline for their work, staying in touch with industry representatives and making sure that each member of the team contributed in a positive way. The objective for the teams was to plan, develop, and present a product line using merchandising processes (following the Wickett, Gaskill and Damhorst model) and develop new branding strategies for the proposed lines. The teams performed trend, color, fabrication and target market research; developed sketches for a line; edited the sketches and presented their line plans; wrote specifications; fitted prototypes on fit models, and developed final production samples for presentation to industry. The branding students developed a SWOT analysis, a Brand Measurement report, a mind-map for the brands and a fully integrated Marketing Report which was presented alongside the ideas for the new lines. In future if the opportunity arises to work in this collaborative way with an existing company who wishes to look both at branding and product development strategies, classes will be scheduled at the same time so that students have more time to meet and discuss timelines and assigned tasks. As it was, student groups had to meet outside of each class time and this proved to be a challenging though not uncommon part of teamwork (Pfaff and Huddleston, 2003). Although the logistics of this exercise were time-consuming to set up and administer, professors felt that the benefits to students were multiple. The most important benefit, according to student feedback from both classes, was the opportunity to work with industry professionals, follow their process, and see the results of their work evaluated by the people who made the decisions at the company level. Faculty members were grateful to have a "real-world" case to work with in the classroom to provide focus. Creative ideas and strategies were traded as plans were made, extending and strengthening the departmental links be tween the branding and product development areas. By working not only with students coming from a different knowledge base, but also having to keep in contact with the industry partner and follow the framework and timeline of industry practice, student teams were challenged to produce excellent and innovative work under new circumstances. Working on the product development and branding for "real-life" brands that are struggling gave students an opportunity to see how closely their coursework ties in with the real-world and how creativity, collaboration and flexibility are necessary components of both the design and business aspects of company operations. Industry personnel were impressed by (a) the level and depth of knowledge and execution in the student projects, and (b) the creativity of new ideas for the brands.

• Journal of agricultural medicine and community health
• /
• v.25 no.1
• /
• pp.51-63
• /
• 2000

Ten Dongs were selected according to the systematic cluster sampling in Koryong Gun, and the survey was conducted on 571 women in the age between 30-69 years. The first survey was performed for 6 days between August 27 to September 1, 1999 with the investigation rate of 60.3%, and the second survey was performed in November with the investigation rate of 91.8%. The contents of survey included demographic characteristics, health behaviors, dyspepsia symptom score, sleeping induction time and the degree of sleep satisfaction, and degree of stress in the subjects. The dyspepsia symptom score was in the average 13.4 points out of a total 44 points and was the highest in the 50-59 year-old age group with 13.9 points. The sleep induction time was in the average of 35 minutes and was the highest in the 50-59 year-old age group with 40.9 minutes; the degree of sleep satisfaction was in the average of 7.9 points and was the lowest in the 50-59 year-old age group with 7.5 points. The stress score was in the average of 18.3 points and was highest in those subjects in their 40's and 50's with 18.7 points. When the correlation among the stress score, the degree of sleep satisfaction and dyspepsia symptom score was analyzed, the results showed that he stress score and the degree of sleep satisfaction showed a significant negative correlation and that the stress score and dyspepsia symptom score showed a significant positive correlation. Also, a significant negative correlation was found between the degree of sleep satisfaction and dyspepsia symptom score. According to each age group, a significant correlation was revealed among the stress score, dyspepsia symptom score and the degree of sleep satisfaction in those subjects over 40 years of age compared to those subjects who were younger than 40 years of age. As for educational level, the correlation among the stress score, the degree of sleep satisfaction and dyspepsia symptom score was higher in those subjects with less than middle school education compared to those subjects with more than high school education. When those factors that effects on the dyspepsia symptom score were analyzed with multiple regression, the results showed that the level of stress and chronic diseases were selected as significant variables. When those factors that affected on the degree of sleep satisfaction were analyzed, the sleep induction time and presence of chronic diseases and stress were selected as significant variables. Those women in their 50's who live in rural areas showed the highest level of stress, lowest the degree of sleep satisfaction, and highest level of dyspepsia, indicating that they need stress management. Also, since stress was showed to be a significant variable effecting on dyspepsia or the degree of sleep satisfaction, it is concluded that health promotion is possible through stress management. More studies are needed in the future on coping resources that would strengthen coping against stress, and by conducting studies on stress and related factors on community people, the measures of mental health promotion need to be developed.