• 제어로봇시스템학회논문지
• /
• 제13권10호
• /
• pp.956-961
• /
• 2007

We propose a new distance measurement method and local positioning system for the autonomous mobile robots localization. The distance measurement method is able to measure long-range distances with a high accuracy by using ultrasonic sensors. The time of flight of the ultrasonic waves include various noises is calculated accurately by the proposed period detecting method. The proposed local positioning system is composed of four ultrasonic transmitters and one ultrasonic receiver. The ultrasonic transmitter and receiver are separated but they are synchronized by RF (Radio frequency) signal. The proposed system using ultrasonic waves is represented as USAT(Ultrasonic Satellite System). USAT is able to estimate the position using the least square estimation. The experimental results show that the proposed local positioning system enables to estimate the absolute position precisely.

• 한국통신학회논문지
• /
• 제34권12A호
• /
• pp.982-990
• /
• 2009

IEEE 802.15.4 무선 센서 네트워크는 물리적 또는 환경적 조건을 모니터링하고 수집 하기 위해 센서를 사용하는 독자적인 디바이스로 구성된 무선 네트워크 이다. 최근 센서기술과 정보통신 인프라의 발전으로 환경 모니터링 기술의 하나인 위치추적 기술에 대한 관심이 증가되고 있다. 센서네트워크에서의 일반적인 수신신호 세기 RSSI(Received Signal Strength Indication)를 활용한 위치인식 시스템은 장애물이나 RF의 전파지연 및 멀티패스에 의해 정확한 위치 추적이 어렵다. 따라서 본 논문에서는 RSSI 기반의 위치 추적 시스템이 가지고 있는 이러한 문제를 해결하기 위해 Gaussian Filter algorithm을 적용하여 위치 인식 성능을 개선한다. 이에 RSSI 값에 따른 전파 감쇠 특성을 논의한 후, 노드마다 개별 RSSI 값에 따른 확률적 거리 테이블을 작성한 후 생성된 모델을 통해, 센서 노드로부터 추출된 데이터를 본 논문에서 제안한 Gaussian Filter Algorithm을 적용하여 오차개선을 하였다.

• 한국정밀공학회지
• /
• 제17권12호
• /
• pp.9-15
• /
• 2000

• 로봇학회논문지
• /
• 제2권3호
• /
• pp.221-226
• /
• 2007

A robust position-sensing system is proposed in this paper for ubiquitous mobile robots which move indoor as well as outdoor. The Differential GPS (DGPS) which has position estimation error of less than 5 m is a general solution when the mobile robots are moving outdoor, while an active beacon system (ABS) with embedded ultrasonic sensors is selected as an indoor positioning system. The switching from the outdoor to indoor or vice versa causes unstable measurements on account of the reference and algorithm changes. To minimize the switching time in the position estimation and to stabilize the measurement, a robust position-sensing system is proposed. In the system, to minimize the switching delay, the door positions are stored and updated in a database. The reliability and accuracy of the robust positioning system based on DGPS and ABS are verified through the real experiments using a mobile robot prepared for this research and demonstrated.

• Journal of Positioning, Navigation, and Timing
• /
• 제7권4호
• /
• pp.285-294
• /
• 2018

In this study, we implemented the data quality monitoring algorithm which is the previous step for real-time Global Navigation Satellite System (GNSS) correction generation and compared Global Positioning System (GPS) and BeiDou System (BDS). Signal Quality Monitoring (SQM), Data QM, and Measurement QM (MQM) that are well known in Ground Based Augmentation System (GBAS) were used for quality monitoring. SQM and Carrier Acceleration Ramp Step Test (CARST) of MQM result were divided by satellite elevation angle and analyzed. The data which are judged as abnormal are removed and presented as Root Mean Square (RMS), standard deviation, average, maximum, and minimum value.

• 한국멀티미디어학회논문지
• /
• 제22권9호
• /
• pp.1011-1019
• /
• 2019

In this paper, we propose a system that can more precisely identify and monitor the position of the tool used in the assembling workplace such as automobile production. The proposed positioning monitoring system is a combination of UWB communication module and MEMS IMU sensor. Since UWB does not need modulation and demodulation function and has low power density, UWB is widely used in indoor positioning field. However, it may cause positioning error due to errors in RF transmission and reception process, which may cause positioning accuracy. Therefore, in this paper, we propose an algorithm that uses IMU as an auxiliary means to compensate for errors that may occur in positioning using only UWB. The tag and anchor of UWB module measure the transmission / reception time by transmitting signals to each other and then estimate the distance between tag and anchor. The MEMS IMU sensor serves to provide positioning calibration information. The tag, which is a mobile node and attached to a moving tool, measures the three-dimensional position of the tool and transfers the coordinate data to the anchor. Thus, it is possible to confirm whether or not the specific tool is properly used according to the prescribed regulations.

• Journal of Positioning, Navigation, and Timing
• /
• 제11권4호
• /
• pp.251-261
• /
• 2022

The Centimeter Level Augmentation Service (CLAS) is the Precise Point Positioning (PPP) - Real Time Kinematic (RTK) correction service utilizing the Quasi-Zenith Satellite System (QZSS) L6 (1278.65 MHz) signal to broadcast the Global Navigation Satellite System (GNSS) error corrections. Compact State-Space Representation (CSSR) corrections for mitigating GNSS measurement error sources such as satellite orbit, clock, code and phase biases, tropospheric error, ionospheric error are estimated from the ground segment of QZSS CLAS using the code and carrier-phase measurements collected in the Japan's GNSS Earth Observation Network (GEONET). Since the CLAS service begun on November 1, 2018, users with dedicated receivers can perform cm-level precise positioning using CSSR corrections. In this paper, CLAS-based VRS-RTK performance evaluation was performed using Global Positioning System (GPS) observables collected from the refence station, TSK2, located in Japan. As a result of performing GPS-only RTK positioning using the open-source software CLASLIB and RTKLIB, it took about 15 minutes to resolve the carrier-phase ambiguities, and the RTK fix rate was only about 41%. Also, the Root Mean Squares (RMS) values of position errors (fixed only) are about 4cm horizontally and 7 cm vertically.

• Journal of Positioning, Navigation, and Timing
• /
• 제12권3호
• /
• pp.323-332
• /
• 2023

Today, services using Positioning, Navigation, and Timing (PNT) technology are provided in various fields, such as smartphone Location-Based Service (LBS) and autonomous driving. Generally, outdoor positioning techniques depend on the Global Navigation Satellite System (GNSS), and the need for positioning techniques that guarantee positioning accuracy, availability, and continuity is emerging with advances in service. In particular, continuity is not guaranteed in urban canyons where it is challenging to secure visible satellites with standalone GNSS, and even if more than four satellites are visible, the positioning accuracy and stability are reduced due to multipath channels. Research using Low Earth Orbit (LEO) satellites is already underway to overcome these limitations. In this study, we conducted a trend analysis of LEO-PNT research, an LEO satellite-based navigation and augmentation system. Through comparison with GNSS, the differentiation of LEO-PNT was confirmed, and the system design and receiver processing were analyzed according to LEO-PNT classification. Lastly, the current status of LEO-PNT development by country and institution was confirmed.

• 로봇학회논문지
• /
• 제12권3호
• /
• pp.350-355
• /
• 2017

UWB (Ultra Wide Band) refers to a system with a bandwidth of over 500 MHz or a bandwidth of 20% of the center frequency. It is robust against channel fading and has a wide signal bandwidth. Using the IR-UWB based ranging system, it is possible to obtain decimeter-level ranging accuracy. Furthermore, IR-UWB system enables acquisition over glass or cement with high resolution. In recent years, IR-UWB-based ranging chipsets have become cheap and popular, and it has become possible to implement positioning systems of several tens of centimeters. The system can be configured as one-way ranging (OWR) positioning system for fast ranging and TWR (two-way ranging) positioning system for cheap and robust ranging. On the other hand, the ranging based positioning system has a limitation on the number of terminals for localization because it takes time to perform a communication procedure to perform ranging. To overcome this problem, code multiplexing and channel multiplexing are performed. However, errors occur in measurement due to interference between channels and code, multipath, and so on. The measurement filtering is used to reduce the measurement error, but more fundamentally, techniques for removing these measurements should be studied. First, the TWR based positioning was analyzed from a stochastic point of view and the effects of outlier measurements were summarized. The positioning algorithm for analytically identifying and removing single outlier is summarized and extended to three dimensions. Through the simulation, we have verified the algorithm to detect and remove single outliers.