• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.10
• /
• pp.975-981
• /
• 2006

This paper shows a feasibility analysis results on RFID for car positioning system. Usually, a car navigation is mainly based on GPS combined with map-matching. However, in the case of poor visibility of satellites, GPS can not supply accurate position information continuously. In recent years, RFID has been considered to be one of key technologies in positioning and localization area. But its application and research results in the area of vehicular positioning are not popular. RFID system consists of tag, reader, antenna and software such as drivers and middleware. The main function of RFID system in a vehicular positioning is to retrieve ID recorded position information from tags which set on the center of road. We propose a positioning method for vehicles using RFID and we present some indoor and outdoor experiment results to show that the proposed method is available in vehicle operational environments.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.27 no.1
• /
• pp.139-142
• /
• 2023

In this paper, we propose a GNSS-UWB hybrid positioning system for indoor and outdoor seamless positioning. Fusion of GNSS and inertial sensors has been widely used as a method for estimating positions in places where GNSS reception sensitivity is low, and UWB technology, which started as a short-range wireless communication technology, is widely used indoors where GNSS is completely blocked. This paper proposes a method of mutual correction and fusion of the location information collected through GNSS and the location information collected from the UWB indoor positioning system when indoor and outdoor work occurs continuously and repeatedly, such as in an industrial site.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.1
• /
• pp.131-140
• /
• 2013

Due to the limitations of the existing indoor positioning system depending on the radio wave, at present, it is required to introduce a new method in order to improve the accuracy in indoor environment. Recently, bio-inspired technology has become the future core technology. Thus, this study examined the accurate positioning method applying the abilities that animals with homing instinct measure their position by searching geomagnetic field with the use of their biomagnets. In order to confirm the applicability of geomagnetic field, a new source for indoor positioning, this study separated the constituent materials and building structure and designed the structures that can carry the actual magnetic field sensor and the data collection module. Subsequently, this study investigated the applicability of geomagnetic field as a positioning source by establishing the positioning system of Fingerprint method. In performance evaluation of the positioning system, the geomagnetic strength-based positioning system was similar to or approximately 20 percent higher than the wireless LAN-based positioning system in the buildings with the existing wireless LAN. Thus, in the environment without infrastructure for indoor positioning, the geomagnetic, an independent earth resource, can make it possible to realize the indoor positioning.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.1
• /
• pp.73-84
• /
• 1995

New morphological positioning algorithm and inspection method are presented and compared with a method by means of the Hough transform. The positioning algorithm is the process of finding the center and the rotated angle of the surface mounted device (SMD). The inspection method is capable of detecting the location of broken or bent leads. In order to obtain the center and the orientation of the SMD rapidly, the Hough transform method utilizes feature points (concave points) and is executed on a DSP board. The proposed morphological method is implemented by using the morphological skeleton subsets, and an ultimate orientation is decided by the Hit-or-Miss transform (HMT). In the inspection process, two inspection methods also are presented. The first method utilizes the morphological methods, i.e., opening and closing. It is performed before the positioning process and called an initial inspection. The second method follows the positioning process and is performed by an inspection of intersections of rulers and the lead edge (or the skeleton). It is a ruling technique which is referred to as a detailed inspection. We find the morphological approach is preciser and faster than the Hough approach by the comparison of the proposed algorithms.

• Journal of Positioning, Navigation, and Timing
• /
• v.8 no.4
• /
• pp.183-192
• /
• 2019

In fingerprint-based wireless positioning, it is necessary to establish a DB of the unmeasured area. To this end, a method of estimating the position of a base station based on a signal propagation model, and a method of estimating the information of the received signal in the unmeasured area based on the estimated position of the base station have been investigating. The purpose of this paper is to estimate the position of the base station using the measured information and to analyze the performance of the positioning. Vehicles equipped with a GPS receiver and signal measuring equipment travel the service area and acquire location-based Reference Signal Received Power (RSRP) measurements. We propose a method of estimating the position of the base station using the measured information. And the performance of the proposed method is analyzed on a simulation basis. The simulation results confirm that the accuracy of the positioning is affected by the measured area and the Dilution of Precision (DOP), the accuracy of the position information obtained by the GPS receiver, and the errors of the signal included in the RSRP. Based on the results of this paper, we can expect that the position of the base station can be estimated and the DB of the unmeasured area can be constructed based on the estimated position of the base stations and the signal propagation model.

• International Journal of Precision Engineering and Manufacturing
• /
• v.8 no.2
• /
• pp.9-13
• /
• 2007

We describe how to control a piezoelectric actuator using the open-loop method for point-to-point positioning. Since piezoelectric actuators have nonlinear characteristics due to hysteresis and creep between the input voltage and the resulting displacement, a special method is required to eliminate this nonlinearity for an open-loop drive. We have introduced open-loop driving methods for piezoelectric actuators in the past, which required a large input voltage and an initializing motion sequence to reset the state of the actuator before each movement. In this paper, we propose a new driving method that uses the initializing state. This method also utilizes the overshoot from both the upward and downward stepwise drives. Applying this method., we obtained precise point-to-point positioning without the influence of hysteresis and creep.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.5
• /
• pp.789-796
• /
• 2012

Fingerprinting is a widely used positioning technology for received signal strength (RSS) based wireless local area network (WLAN) positioning system. Though spatial RSS variation is the key factor of the positioning technology, temporal RSS variation needs to be considered for more accuracy. To deal with the spatial and temporal RSS characteristics within a unified framework, this paper proposes an extended signal propagation mode (ESPM) and a fingerprint generation method. The proposed spatiotemporal fingerprint generation method consists of two algorithms running in parallel; Kalman filtering at several measurement-sampling locations and Kriging to generate location fingerprints at dense reference locations. The two different algorithms are connected by the extended signal propagation model which describes the spatial and temporal measurement characteristics in one frame. An experiment demonstrates that the proposed method provides an improved positioning accuracy.

• Journal of Positioning, Navigation, and Timing
• /
• v.12 no.2
• /
• pp.157-166
• /
• 2023

Several experiments were carried out to analyze the impact of the modernized Global Positioning System (GPS) L2C signal on pseudorange-based point positioning. Three dual-frequency positioning algorithms, ionosphere-free linear combination, ionospheric error estimation, and simple integration, were used, and the results were compared with those of Standard Point Positioning (SPP). An analysis was conducted to determine the characteristics of each dual-frequency positioning method, the impact of the magnitude of ionospheric error, and receiver grade. Ionosphere-free and ionospheric error estimation methods can provide improved positioning accuracy relative to SPP because they are able to significantly reduce the ionospheric error. However, this result was possible only when the ionospheric error reduction effect was greater than the disadvantage of these dual-frequency positioning algorithms such as the increment of multipath and noise, impact of uncertainty of unknown parameter estimation. The RMSE of the simple integration algorithm was larger than that of SPP, because of the remaining ionospheric error. Even though the receiver grade was different, similar results were observed.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.671-679
• /
• 2011

Now, for the continuous location detection of train, The method which the moving distance and speed of vehicles are detected using an odometer mounted within railway vehicle, is used in railway domain generally. There are some problems that the train's positioning errors are accumulated as the moving distances increase. To solve this problems, The Train-borne Positioning System is being developed at Korea Railroad Research Institute. It is required to evaluate exactly a positioning performance of The Train-borne Positioning System for improvement of performance. Therefore, in this paper, we review the CDGPS methods to acquire reference position for performance evaluation of Train-borne Positioning System and verify the accuracy of the reference position through the static test and the vehicle test.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.386-389
• /
• 2007

Currently, fast and accurate long baseline positioning in kinematic mode is a challenging topic, but positional accuracy can be improved with the help of the network-derived external ionospheric corrections. To provide not only ionospheric corrections, but also their variances, satellite-by-satellite interpolation for the ionospheric delays is performed using the least-squares collocation (LSC) method. Satellite-by-satellite interpolation has the advantage in that the vertical projection used in single-layer ionospheric model is not required. Also, more reliable user positioning and the corresponding accuracy assessment can be obtained by providing not only external ionospheric corrections but also their variances. The rover positioning with and without the external ionospheric delays in both rapid-static and kinematic mode was performed and analyzed. The numerical results indicate that the improvement in the positioning quality is achieved using the proposed method. With the TAMDEF network in Antarctica, 18 % improvement in mean time-to-fix in kinematic mode was achieved.