• 제목/요약/키워드: Positional value

검색결과 78건 처리시간 0.037초

A Simulation Study on the Use of GPS Signals to Infer 3-D Atmospheric Wet Refractivity Structure

  • Chiang, Chen-Ching;Liou, Yuei-An
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
    • /
    • pp.1021-1023
    • /
    • 2003
  • Atmospheric water vapor is a key variable in numerical weather prediction (NWP) models, but it is a crucial factor to limit the accuracy of high-precision GPS positioning technique. For both issues, knowledge about the amount of water vapor is extremely important. In this study, we perform a simulation study to utilize GPS signals through a developed tomographic scheme to retrieve 3D structure of atmospheric wet refractivity, which may be assimilated into NWP models for advancing forecasting or position calculation for improving GPS positioning accuracy. For the purpose of knowing the absolute accuracy of the developed tomographic method, a well-defined temporal and spatial varying state of atmospheric profile is utilized. Under such circumstance, several factors that may influence the retrievals can be easily examined and their impacts may be clearly quantified. They include the values of the positional dilution of precision (PDOP) factors of the GPS signals, ... etc. Based upon the use of a variety spectrum of adjustable factors, many interesting findings are obtained. For example, the more is the number of the observed GPS signals the better becomes the retrievals as expected. Also, the smaller is the PDOP value the better becomes the retrievals.

  • PDF

Numerical Investigation of Motion Response of the Tanker at Varying Vertical Center of Gravities

  • Van Thuan Mai;Thi Loan Mai;Hyeon Kyu Yoon
    • 한국해양공학회지
    • /
    • 제38권1호
    • /
    • pp.1-9
    • /
    • 2024
  • The vertical center of gravity (VCG) has a significant impact on the roll motion response of a surface ship, particularly oil tankers based on the oil level in the tanker after discharging oil at several stations or positional changes, such as changes in the superstructure and deck structure. This study examined the motion response of the Korea very large crude carrier 2 (KVLCC2) at various VCGs, especially roll motion when the VCG changed. The potential theory in the Ansys AQWA program was used as a numerical simulation method to calculate the motion response. On the other hand, the calculations obtained through potential theory overestimated the roll amplitudes during resonance and lacked precision. Therefore, roll damping is a necessary parameter that accounts for the viscosity effect by performing an experimental roll decay. The roll decay test estimated the roll damping coefficients for various VCGs using Froude's method. The motion response of the ship in regular waves was evaluated for various VCGs using the estimated roll-damping coefficients. In addition, the reliability of the numerical simulation in motion response was verified with those of the experiment method reported elsewhere. The simulation results showed that the responses of the surge, sway, heave, pitch, and yaw motion were not affected by changing the VCG, but the natural frequency and magnitude of the peak value of the roll motion response varied with the VCG.

잡음 구분에 의한 지능형 기동표적 추적기법 (Intelligent Maneuvering Target Tracking Based on Noise Separation)

  • 손현승;박진배;주영훈
    • 한국지능시스템학회논문지
    • /
    • 제21권4호
    • /
    • pp.469-474
    • /
    • 2011
  • 본 논문에서는 기동표적의 위치 오차값 보상 기법을 이용한 지능형 기동표적 추적 기법을 제안한다. 기동표적의 관측값과 예상위치와의 차이를 가속도와 순수 잡음으로 분리한다. 최적의 수준으로 가속도를 추출하기 위하여 K-means 클러스터링 기법과 TS 퍼지 시스템을 이용한다. K-means 클러스터링에 의해 분리된 가속도와 잡음에 대한 소속함수를 설정하고 퍼지 모델화하여 기동표적의 특성을 파악한다. 계산상의 오차를 보상하기 위하여 분리된 가속도와 잡음은 추적 알고리즘의 계산과정에 적절히 이용된다. 추정값 계산시, 가속도를 분리 하므로써 필터링 과정은 표적의 비선형 기동을 선형기동으로 인식하여 칼만필터의 성능을 유지시킨다. 기동표적의 비선형성에 대한 오차는 추정된 가속도를 통해 보상된다. 제안된 시스템의 소속함수에 사용되는 파라미터값을 조종하여 상황에 따라 적응성과 강인성을 향상시킨다. 제안된 시스템은 실시간 추적이 가능하도록 구성하였으며, 몇 가지 예를 통하여 본 논문에서 제안한 방법의 우수성을 증명한다.

초등수학에서 측정활동에 기반한 소수의 학습.지도 방안 및 학생의 이해 실태 분석 (A Construction of 'Decimal Fraction' Unit of Elementary Mathematics Textbook and Analysis of Students' State of Understanding Based on Measurement Activity)

  • 김은정;강흥규
    • 한국초등수학교육학회지
    • /
    • 제18권1호
    • /
    • pp.37-62
    • /
    • 2014
  • 소수 개념은 측정수, 십진기수법, 분수, 비, 작용소, 통약 불가능성, 무한근사, 실무한, 계산수 등 여러 측면을 가지고 있지만, 이 소수 개념의 요소들은 분리될 수 있는 것이라기보다는 단위의 세분할에 의한 측정활동에 복합적으로 내재되어 있다. 요컨대 소수 지도의 핵심은 측정활동이며, 소수의 개념 지도를 위해서는 자연수, 분수와의 관계 이해와 십진기수법적인 자리체계를 명확히 이해시키는 것이 중요하며 그 수단으로 측정활동이 강조되어야 한다. 이 논문에서는 측정활동을 방법으로 소수에 내포된 여러 개념들을 통합적으로 이해시킬 수 있는 학습 지도안을 구성하고, 그에 따른 학생들의 이해 실태를 분석하고자 한다.

  • PDF

Three-dimensional Kinematics of Knee Joint in a Complete Gait Cycle: A Comparative Study between Handball Players and Non-athletes

  • Dinesh, Paudel;Back, Jin-Ho
    • 한국운동역학회지
    • /
    • 제31권3호
    • /
    • pp.176-182
    • /
    • 2021
  • Objective: The purpose of this study is to investigate whether the athletic knee show greater rotation and translation movement than non-athletic knee during the treadmill walking with their preferred speed in a complete gait cycle. Method: Thirty young and healthy male subjects participated in the study, fifteen handball players (mean age: 19.6 ± 1.4 years old, mean weight: 85 ± 11.9 Kg, mean height: 179.8 ± 4.7) and fifteen non-athletes (mean age: 22.8 ± 1.2 years old, mean weight: 74.5 ± 8.6 Kg, mean height: 175 ± 5.9). Three-dimensional positional coordinate of lower limb during treadmill walking were analyzed. Results: There were significant differences (t (22.014)=1.585, p=0.127 in the range of internal and external rotation with mean value for handball player (M=14.4513, SD=2.3839) was higher than non-athletes (M=13.3327, SD=1.337). The magnitude of the difference in the means (mean difference=1.11867, 95% CI: -0.34489 to 2.5822) was significant. There were also significant differences (t (17.956)=1.654, p=0.116 in the max abduction and adduction with mean value for handball player (M=5.7160, SD=2.49281) was higher than non-athletes (M=4.5773, SD=0.94667). The magnitude of the difference in the means (mean difference=1.138, 95% CI: -0.30805 to 2.58539) was significant. At significance level 0.05. Conclusion: Finding of this study suggest that to understand the actual characteristic of knee motion studies have to be done in different walking and running trial at variable speed.

Mandibular Kinesiograph 및 Myo-monitor 를 이용(利用)한 중심위(中心位), 중심교합(中心咬合), myo-co의 상호위치(相互位置) 및 자유로간격(自由路間隔)에 관(關)한 실험적연구(實驗的硏究) (An experimental study on the positional relations of centric relation, centric occlusion and myo-co, and free-way space using Mandibular Kinesiograph and Myo-monitor)

  • 정재헌
    • 대한치과보철학회지
    • /
    • 제18권1호
    • /
    • pp.73-86
    • /
    • 1980
  • Recently, the controversy continues as to whether maximum intercuspation of teeth should occur at the terminal hinge position(the condylar theory) or at the myo-co(the neuromuscular theory). There is also much controversy regarding the antero-posterior position of myo-co. The object of this study was to measure and compare with the positional relations of centric relation, centric occlusion and myo-co, and free-way space using Mandibular Kinesiograph and Myo-monitor in the 40 subjects without stomatognathic problems. Mandibular Kinesiograph(M.K.G.) was originally conceived as a research instrument to track mandibular movement and position. As its use in research progressed, its great diagnostic value became apparent in case by case. And Myo-monitor was developed as a means of applying the neuromuscular approach to occlusion. Thus the Myo-monitor technique is an intra-systemic approach to occlusal positioning using patient's own musculature, and Myo-monitor is used to relax the musculature by a light myopulse induced electronically. From this experiment, the following results were obtained. 1. The adaptive free-way space before muscle relaxation was an average of $1.6{\pm}60mm$, and the true free-way space after muscle relaxation using Myo-monitor was an average of $2.4{\pm}0.74mm$. 2. It took an average of $25{\pm}3.11$ minutes to relax the mandibular musculature by Myo-monitor and administration of 5mg. Diazepam and an average of $38{\pm}4.73$ minutes by Myo-monitor without administration of Diazepam. 3. Myo-co existed anterior to centric occlusion, with an average of $0.53{\pm}0.31$ mm, and centric relation existed posterior to centric occlusion, with an average of $0.57{\pm}0.58mm$ before muscle relaxation and with an average of $0.57{\pm}0.43mm$ after muscle relaxation. 4. Centric relation coincided with centric occlusion in 5 of 40 subjects(12.5%), and posterior to centric occlusion in the rest of cases (87.5%). 5. Myo-co existed anterior to centric occlusion in 38 of 40 subjects(95%), except 1 subject that coincided with centric occlusion and 1 subject that existed posterior to centric occlusion. 6. Myo-co and centric relation existed inferior to centric occlusion and the lateral displacement was various with individual difference. 7. The total displacement from centric occlusion to centric relation was an average of $0.74{\pm}0.64mm$ before muscle relaxation, and an average of $0.68{\pm}0.53mm$ after muscle relaxation, and the total displacement from centric occlusion to myo-co was an average of $1.07{\pm}0.58mm$.

  • PDF

Microsatellite 의 대립유전자 빈도를 이용한 한우의 경제형질과의 연관성 규명 (Potential Allelic Association of Microsatellite Markers on Bovine Chromosome 5 with Carcass Traits in Hanwoo (Korean cattle))

  • 오재돈;공홍식;조병욱;이미랑;전광주;이학교
    • 생명과학회지
    • /
    • 제18권9호
    • /
    • pp.1225-1229
    • /
    • 2008
  • 본 연구는 한우의 5번 염색체 내에 존재하고 있는 10개의 microsatellite marker의 대립유전자 빈도를 이용하여 한우의 경제형질과의 연관성을 지닌 좌위를 탐색하기 위하여 실시하였다. 한우 326두를 대상으로 10개의 유전좌위를 분석한 결과 총 169개의 대립유전자가 검출되었다. 모든 유전좌위에서 다형성이 검출되었으며 각 유전좌위 별 대립유전자의 수는 9에서 28개로 나타났으며 평균 16.9로 나타났다. 가장 높은 PIC 값을 가진 유전좌위는 DIK2400(0.908)이었으며 가장 낮은 유전좌위는 DIK2718 (0.603)으로 검출되었다. 관측된 이형접합도에서는 DIK1048 (0.655)가 가장 높게 나타났으며, DIK2400 (0.906)은 가장 낮은 것으로 검출되었다. 분석된 MS marker들의 대립유전자의 빈도를 이용하여 경제형질과의 연관성을 탐색하기 위하여 각 경제형질별 육종가를 대상으로 상위그룹과 하위그룹으로 나누어 Chi-square검정을 실시하였다. 분석결과 DIK2828의 239 대립유전자는 근내지방도에서 상위그룹과 하위그룹의 빈도차가 유의적인 차이를 보이는 것으로 나타났다. BMC1009의 279 대립유전자는 도체중과 등지방두께에서 유의적인 차이를 확인하였으며 285대립유전자는 도체중, 등지방두께 그리고 근내지방도에서 유의적인 차이가 확인되었다. DIK4329의 200대립유전자는 등심단면적과 등지방두께에서 유의적인 차이가 확인되었다. 본 연구에서 유의적인 차이가 확인된 유전자좌위는 5번 염색체 내 20 (DIK2828), 41 (BMC1009) 그리고 95 (DIK4329) cM로 나타났다.

측두하악장애환자에서 교합안정장치가 하악골위치변화에 미치는 영향에 관한 연구 (A study of mandibular positional changes by the stabilization splint in TMD patients)

  • 천훈;박영국;정규림
    • 대한치과교정학회지
    • /
    • 제30권4호
    • /
    • pp.491-507
    • /
    • 2000
  • 이 연구는 측두하악장애 증상을 나타내는 부정교합자를 대상으로 교합안정장치 사용 전, 후의 측모 두부방사선 사진 상의 하악골의 위치변화를 구명하는데 그 목적이 있다. 연구의 대상자는 측두하악장애증상을 나타내는 부정교합자 60명이며 남자 19명, 여자 41명으로 각각의 평균연령은 19.5세와 21.5세 이었다. 전체 대상자를 전, 후방적으로는 Angle 분류법에 따른 교합관계에 의하여 Class I, II, III로 분류하였고, 수직적으로는 Jarabak의 후안면고경과 전안면고경의 비율에 따라서 clockwise, straight downward, counterclockwise의 3군으로 구분하여 부정교합군 별로 측정했으며 하악골의 위치변화를 중심교합시의 측모 두부방사선 사진 계측치들로부터 예측할 수 있는지 알아보기 위한 분석을 시행한 것으로 다음과 같은 결과를 얻었다. 1. 전체 대상자 비교시 측두하악장애를 갖는 부정교합환자에서 교합안정장치 사용 이후 하악골은 후하방 회전을 나타내었고 overjet은 1.3mm의 증가, overbite은 1.9mm감소되어 수평변화보다 수직적인 변화의 양이 컸다. 2. 전후방 3군 분류시 하악골의 후하방 변위를 나타내는 항목의 유의성 있는 변화는 Class II군에서 가장 현저하였으며 3군중 후방변위량이 가장 컸다. 3.수직 3군 분류시 Clockwise와 counterclockwise군에서 하악골의 후하방 변위를 나타내는 항목의 유의성 있는 변화가 뚜렷하였으며, 3군 모두에서 수직적인 변화량이 수평변화량 보다 컸다. 4. 중심교합위시의 부정교합 양태 및 골격유형, 그리고 중심교합위 계측치를 통하여 중심위 계측치를 설명할 수 있는 항목은 발견되지 않았다. 이상의 결과는 기존에 시행되어 오던 중심위 전환에 의한 방법이 아니고 측두하악장애를 갖는 부정교합자에서 교합안정 장치 를 장착하여 중심위를 획득한 상태에서 하악골의 위치 변화를 계측한 것으로 측두하악장애를 동반한 부정교합환자에서 중심교합위 상태의 측모 두부방사선 사진에 의존한 진단은 부정교합의 실체를 파악할 수 없음을 확인하였으며, 통상적으로 이용되어 온 중심위 전환방법 역시 중심위 유도후 발생되는 수직적인 부조화의 양상을 나타낼 수 없음을 입증하였다. 또한 전, 후방적으로는 Class II 부정교합군, 수직적으로는 Clockwise군과 Counterclockwise군에서 교합안정장치를 사용한 중심위 회복시에 하악골의 후하방 회전과 이에 동반된 구치부의 교합간섭으로 전후방 부조화뿐 아니라 수직적부조화를 더욱 심화시키므로 이에 대한 진단 및 치료시의 고려가 요구됨을 보여주었다.

  • PDF

전자 진동술을 이용한 악관절의 잡음과 진동에 관한 연구 (A Study on the Sounds and Vibrations of the Temporomandibular Joint using Electrovibratography)

  • Seok-Man Kang;Kyung-Soo Han;Min Shin
    • Journal of Oral Medicine and Pain
    • /
    • 제20권1호
    • /
    • pp.141-158
    • /
    • 1995
  • This study was performed to invetigate the relationship between clinical manifestations related to temporomandibular joint sounds and temporomandibular joint vibrations that occurred synchronously with sounds. There have been reported in many articles that joint sounds indicate internal joint pathology. Therefore, it is necessary to evaluate type and patterns of joint sounds, and radiographic changes of temporomandibular joint(TMJ) in order to diagnose and deal with the Temporomandibular Disorders(TMD). For this study 142 patients with TMDs were collected and they were examined by routine diagnostic procedure for TMDs. The author classified TMJ sounds clinically into 3 types : click, popping, and crepitus. Transcranial and panoramic radiographs were taken for observein bony changes of TMJ, and for observing vibrations of TMJ Sonopak of Biopak system was used. The obtained results were as follows : 1. Female subjects with crepitus were older than those with click or popping and their mean ages were about 45 years old. But in male subjects, there was no age difference. 2. For all subjects, mean value of maximal mouth opening were above 40mm, which are lower limit of normal vertical opening. But in subjects with L-type opening deviation, mouth opening capacity were about 36mm of range. 3. Symptom duration stated when patient presented first were slightly longer in subjects with crepitus but there were no statistical differences. And there were also no radiographic differences among 3 types of joint sounds in regard to symptom duration. 4. In subjects wih click, it might have been interpreted that 12% had closed lock, 12% had degenerative joint disease, and about 17% of he subjects had normal joints by Sonopak. 5. There were no significant relationships between subjective loudness of joint sounds and magnitude of joint vibrations. 6. The highest value of Integral and peak amplitude were observed in popping sounds and though it was not significant, value of peak frequency was highest in crepitus. 7. Amount of mandibular positional change were differed between click and crepitus on frontal plane, between click, crepitus and popping on horizontal plane in rotational movement, respectively. However, there no difference among them in translational movements.

  • PDF

잉곳의 방향성 응고를 위한 주조 로 개발 (Development of Casting Furnace for Directional Solidification Ingot)

  • 주진영;이승준;백하니;오훈;조현섭;이충훈
    • 한국산학기술학회논문지
    • /
    • 제13권2호
    • /
    • pp.808-816
    • /
    • 2012
  • 본 논문은 열 해석 시뮬레이션과 주조로의 구조 변경을 통한 실리콘 잉곳의 방향성 응고에 대한 연구이다. 열 해석 시뮬레이션에 의한 결과, 용융은 유지 시간이 80분일 때 실리콘이 전체적으로 고르게 용융 온도에 도달하였고 냉각은 상부 냉각 온도가 $1,400^{\circ}C$와 60분 냉각 시 가장 좋은 결과 값을 나타내었다. 제작된 웨이퍼가 기존의 상용웨이퍼보다 결정립계에서의 에칭이 훨씬 적게 이루어졌다. FTIR 측정결과 산소와 탄소 모두 모두 임계값 이하의 불순물로 존재함을 확인하였다. NAA 분석 결과 총 18가지 금속 불순물이 검출 되었지만, 농도 분포는 같은 위치에서 위와 아래의 차이는 크게 나지 않고, 어떤 특정한 위치에서 한쪽으로 집중되거나 어떤 경향성 없이 전체의 샘플의 모든 부분에서 농도가 거의 일정하게 분포를 나타냈다.