• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.1
• /
• pp.49-54
• /
• 2021

Indoor positioning system becomes of increasing interests due to the demands for accurate indoor location information where Global Navigation Satellite System signal does not approach. Wi-Fi access points (APs) built in many construction in advance helps developing a Wi-Fi Received Signal Strength Indicator (RSSI) based indoor localization. This localization method first collects pairs of position and RSSI measurement set, which is called fingerprint database, and then estimates a user's position when given a query measurement set by comparing the fingerprint database. The challenge arises from nonlinearity and noise on Wi-Fi RSSI measurements and complexity of handling a large amount of the fingerprint data. In this paper, machine learning techniques have been applied to implement Wi-Fi based localization. However, most of existing indoor localizations focus on single position estimation. The main contribution of this paper is to develop multi-target localization by using deep neural, which is beneficial when a massive crowd requests positioning service. This paper evaluates the proposed multilocalization based on deep learning from a multi-story building, and analyses its learning effect as increasing number of target positions.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.5B no.1
• /
• pp.84-89
• /
• 2005

This paper presents a control algorithm for a large salient-pole synchronous motor fed by a Load Commutated Inverter (LCI). Many papers have been presented in the past few years on the justification, design, and application of variable-speed drive. The focus of this paper is on high torque operation and the estimation of initial rotor position. The results of simulation indicate that it is possible to produce the maximum torque and estimate the initial rotor position.

• Korean Journal of Optics and Photonics
• /
• v.34 no.2
• /
• pp.66-71
• /
• 2023

Zoom lenses are now starting to be applied to mobile-phone cameras as well. A zoom lens applied to a mobile-phone camera is mainly used to capture images in the telephoto range. Such an optical system has a long focal length, similar to that of a high-magnification zoom optical system, so the position of the imaging device also shifts significantly, due to manufacturing errors of the lenses and mechanical parts. In the past, the positional shift of the imaging device was corrected by moving the first lens group and the total optical system, but this paper confirms that the position of the imaging device can be corrected by selecting any two moving lens groups. However, it is found that more distance must be secured in the front and rear of a moving lens group for this purpose.

• The KIPS Transactions:PartD
• /
• v.9D no.1
• /
• pp.103-110
• /
• 2002

In component-Based Software Development, the quality of indivisual component is play an important role in quality decision of the whole software. So we need the practical strategy for component testing. In general, component testing can divide focus into producer position and consumer position. In this paper, because the consumer position uses output of the producer position, testing domain is deployed in the producer position. We propose RUP based five step testing processes for component quality evaluation and implements a case study of EJB environment for appling our testing process. This paper shows that proposed five step processes are applicable to component quality evaluation.

• Journal of the Semiconductor & Display Technology
• /
• v.13 no.1
• /
• pp.51-55
• /
• 2014

In this paper, an hybrid automatic focusing method has been proposed for speedy and reliable measurement and inspection in industry. It can improve reliability of focusing position by using not a focusing measure but the hybrid one that is incorporated with sobel operator and auto-correlation. Also, it can not only reduce control time of focusing position using adaptive step size, but also improve accuracy of focusing position by gaussian interpolation. Its performance is verified by experiments. It is expected that it can apply to optical system for measurement and inspection in industry fields.

• ETRI Journal
• /
• v.31 no.6
• /
• pp.695-702
• /
• 2009

We propose a lens-drive unit composed of an ionic polymer-metal composite (IPMC) for an auto-focus compact camera module in cellular phones to solve the power consumption problem of voice coil motors which are widely used in commercial products. In this research, an IPMC incorporated into a lens-drive unit is designed to implement a large displacement in low-power consumption by using an anisotropic plasma treatment. Experimental results show that a camera module containing IPMCs can control and maintain the position of the lens by using proportional integral derivative control with a photo-reflective position sensor despite the non-linear actuation behavior of IPMCs. We demonstrate that the fabrication and commercialization of a lens actuator that has a large displacement and low power consumption using IPMCs is possible in the near future.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.1
• /
• pp.137-146
• /
• 2019

The ultrasonic phased arrays are used for treating tumors in the human body by the focus control of the acoustic pressure at the desired position. The magnitude and phase of the surface acoustic pressure in each ultrasonic transducer is controlled by the magnitude and phase of the applied voltage to it. In this paper, the relationship between the applied voltage and the surface acoustic pressure of the ultrasound transducer is modelled, and the desired voltage is realized by PWM technique. The validity of the proposed method is verified by computer simulation of the focus control of a ultrasonic phased array composed of 61 ultrasonic transducers.

• Korean Journal of Optics and Photonics
• /
• v.7 no.2
• /
• pp.101-111
• /
• 1996

Optical microscopes integrated with CCD cameras are widely used for automatic inspection of precision circuit patterns fabricated on glass masks and silicon wafers. For this application it is important to position the object always is focus so that the image appears in good quality while the microscope scans the object. However, as the magnification of the microscope is taken large for fine resolution the depth of focus becomes small, often in submicron ranges, requiring special care in focusing. This study proposes a new auto-focusing method, which can be readily incorporated in existing optical configuration of microscope. This method is based on optical triangulation using a separate beam of laser and two photodiodes, eliminating focus errors caused by surface roughness and waviness. Experimental results prove that the method can produce focus error signals which are very sensitive with a resolution of 5 nm within 0.5 ${\mu}{\textrm}{m}$ accuracy.

• Language and Information
• /
• v.7 no.2
• /
• pp.31-58
• /
• 2003

The main goal of this paper is to describe and analyse intensifiers, especially non-head-bound-intensifiers (NHBIs), which can be included in the discussion and analysis of these elements as focus particles. In doing so, NHBIs such as Korean susulo, casin/cache, English x-self and German selbst are dealt with in a rather cross-linguistical perspective. The pure and strict comparison between Korean, English and German is not intended. This paper is mainly concerned with the semantic domain where the respective contributions of the expressions in question overlap, which offers the common base for the discussion regarding Korean, one of the non-European languages and English and German, two European languages. They share the semantic domain ‘intensification’ regarding relevant subject-NP. They introduce an ordering distinguishing center and periphery. In contrast to head-bound-intensifiers (HBIs), however, NHBIs add self-involvement (directness of involvement) of subject-NP to the meaning of the relevant sentence. I adopt the proposals of Konig (1991), Primus (1992) and Siemund (2000) in the treatment of intensifiers as focus particles. However, I reject Konig (1991) that just NHBIs talre scope over a whole clause, Primus (1992) that NHBIs focus VPs, not NPs, and Siemund (2000) that NHBIs can be further devided into two groups, viz. NHBIs with exclusive readings and NHBIs with inclusive readings. Evidence for my position is presented mainly in the course of describing and analysing some syntactic properties and the meaning and use of NHBIs. I come to the conclusion that both the common meaning of intensifiers as focus particles and the common meaning of NHBIs of three languages can be represented by a simple logical formalism.

• Journal of the Korean Vacuum Society
• /
• v.20 no.6
• /
• pp.403-408
• /
• 2011

To develop the MFX (Micro-Focus X-ray) tube, the trajectories of electrons emitted from the field emission cathode was simulated using SIMION program. Regardless of starting position of the electron in emitter, we found out the fact that there is the optimum extractor voltage Ve, which can focus the electron beam on one place. Extractor voltage Ve varies depending on the source voltage Vs, but the ratio of two voltages (Ve/Vs) is always constant, its value was 99.4%. When the ratio of two voltages (Ve/Vs) was 99.4%, the beam diameter in the cross-over point was $1.2{\mu}m$. Because the focal spot size in MFXG (Micro-Focus X-ray Generator) can not be less than the cross-over diameter within MFX tube, it is important to find out the conditions that can make a smaller beam diameter. Therefore, the above results is considered to be a very important ones in the development of the MFXG.