• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2641-2647
• /
• 2003

Conventional DLLs estimate the delay times of satellite signals individually and feed back these measurements to the VCO independently. But VDLL estimates delay times and user position directly and then estimate the feedback term for VCO using the estimated position changes. In this process, input measurements are treated as vectors and these vectors are used for navigation. First advantage of VDLL is that noise is reduced in all of the tracking channels making them less likely to enter the nonlinear region and fall below threshold. Second is that VDLL can operate successfully when the conventional independent parallel DLL approach fails completely. It means that VDLL receiver can get enough total signal power to track successfully to obtain accurate position estimates under the same conditions where the signal strength from each individual satellite is so low or week that none of the individual scalar DLL can remain in lock when operating independently. To operate VDLL successfully, it needs to know the initial user dynamics and position and prevents total system from the divergence. The suggested integration method is to use the inertial navigation system to provide initial dynamics for VDLL and to maintain total system stable. We designed the GPS/INS integrated navigation system. This new type of integrated system contained the vector pseudorange format generation block, VDLL signal processing block, position estimation block and the conversion block from position change to delay time feedback term aided by INS.

• 동력기계공학회지
• /
• 제5권3호
• /
• pp.104-113
• /
• 2001

This paper describes a precise position synchronous control of two axes rotating system using BLDC motors and a cooperative control based on decoupling technique and PI control law. The system is required performances both good speed following and minimum position synchronous errors simultaneously. To accomplish these goals, the three kinds of controllers are designed. At first, the current and speed controller are designed very simply to compensate the influences of disturbances and to follow up speed references quickly. Especially, the two degree of freedom PI controller is used considering both good tracking for speed reference input and quick rejection of disturbances in speed controller. Finally, a position synchronous controller is designed as a simple proportional controller to minimize position synchronous errors. The validity of the proposed method is confirmed through some numerical simulations. Moreover, the results are compared to the conventional master-slave control ones to show the effectiveness of the proposed system.

• Journal of Positioning, Navigation, and Timing
• /
• 제9권2호
• /
• pp.117-124
• /
• 2020

In this paper, the symmetric position drift of the integration approach in pedestrian dead reckoning (PDR) system with dual foot-mounted IMU is analyzed. The PDR system that uses the inertial sensor attached to the shoe is called the IA-based PDR system. Since this system is designed based on the inertial navigation system (INS), it has the same characteristics as the error of the INS, then zero-velocity update (ZUPT) is used to correct this error. However, an error that cannot be compensated perfectly by ZUPT exists, and the trend of the position error is the symmetric direction along the side of the shoe(left, right foot) with the IMU attached. The symmetric position error along the side of the shoe gradually increases with walking. In this paper, we analyze the causes of symmetric position drift and show the results. It suggests the possibility of factors other than the error factors that are generally considered in the PDR system based on the integration approach.

• Clinics in Shoulder and Elbow
• /
• 제6권1호
• /
• pp.50-54
• /
• 2003

Object: To evaluate the efficiencies of the arthroscopic rotator cuff surgery which is Performed without the traction system in the lateral decubitus position. Methods: Twenty-nine cases of the arthroscopic rotator cuff surgery performed without the traction system in the lateral decubitus position were studied from February, 2002 to January, 2005. We performed a repair using the arthroscopic debridement and the arthroscopic rotator cuff repair, or using the mini-open incision technique after the confirmation of rotator cuff tear, then, the arthroscopic subacromial decompression was performed after the confirmation of subacromial lesions Results: We could easily find the subscapularis tear which was often overlooked in the arthroscopic rotator cuff surgery performed with the traction surgery by the relaxation of the subscapularis, as the arm position was internally rotate about 45 to 70 degrees from abducted position. We found that the operation time was reduced 14 minutes shorter than the operation time of the controlled group which had the surgery with the traction system on the average. We also found that there were no neurovascular complications from all cases. Conclusions: The arthroscopic rotator cuff surgery without traction system in the lateral decubitus position provided the better visual field, easy manipulation of the joint and reducing operation time.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.642-645
• /
• 1991

This paper presents the results of research on hardware and software of the landmark tracking system to the positions of moving robot in real time. The landmark tracking system is composed of CCD camera, landmark, strobo system and image processing board. The algorithm calculates the position and direction by using the coordinate transformation fomula after calculating the centroid and rotation angle of landmark at fixed position using the image data. The experiment is performed with landmark tracking system is loaded on xyz-table. XYZ-table is used for identifying the true position in our experiment. The results shows that this system has high performance with maxima error of .+-.1 pixels.

• 제어로봇시스템학회논문지
• /
• 제9권10호
• /
• pp.774-781
• /
• 2003

The important factors that cause position error in X-Y robot are inertial force, frictions and spring distortion in screw or coupling. We have to estimate these factors precisely to correct position errors, Which is very difficult. In this paper, we makes systems to inspect metal stencil which is used to print solder paste on pads of SMD of PCB with low precision X-Y robot and vision system. To correct position error that is caused by low precision X-Y robot, we defines position error vector that is formed with position of objects that exist in reference and camera image. We apply MHT(Modified Hough Transformation) for the aim of determining the dominant position error vector. We modify reference image using extracted dominant position error vector and obtain reference image that is the same with camera image. Effectiveness and performance of this method are verified by simulation and experiment.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.201-205
• /
• 2004

A method for driving and position sensing of TSRM(Toroidal Switched Reluctance Motor) using the search coil is presented in this paper. Position information of the rotor is essential for SRM drives. The rotor position sensor such as an opto-interrupter or high performance encoder is generally used for the estimation of rotor position. However, these discrete position sensors not only add complexity and cost to the system but also tend to reduce the reliability of the drive system. In order to solve these problems, in the proposed method, rotor position detection is achieved using the voltage waveforms induced by the time varying flux linkage in the search coils, and then the appropriate phases are excited to drive the SRM. But the search coil EMF is generated only when the motor rotates. Therefore the rotor position sensing method at standstill is also suggested.

• 조명전기설비학회논문지
• /
• 제22권3호
• /
• pp.66-73
• /
• 2008

This paper presents a position sensorless control system of SRM over wide speed range. Due to the doubly salient structure of the SRM, the phase inductance varies along with the rotor position. Most of the sensorless control techniques are based on the fact that the magnetic status of the SRM is a function of the angular rotor position. The rotor position estimation of the SRM is somewhat difficult because of its highly nonlinear magnetizing characteristics. In order to estimate more accurate rotor position over wide speed range, Neural Network is used for this highly nonlinear function approximation. Magnetizing data patterns of the prototype 1-hp SRM are obtained from locked rotor test, and used for the Neural Network training data set. Through measurement of the flux-linkage and phase currents, rotor position is able to estimate from current-flux-rotor position lookup table which is constructed from trained Neural Network. Experimental results for a 1-hp SRM over 16:1 speed range are presented for the verification of the proposed sensorless control algorithm.

• 로봇학회논문지
• /
• 제15권4호
• /
• pp.357-364
• /
• 2020

Indoor localization using an artificial marker plays a key role for a robot to be used in a service environment. A number of researchers have predefined the positions of markers and attached them to the positions in order to reduce the error of the localization method. However, it is practically impossible to attach a marker to the predetermined position accurately. In order to visualize the position of an object in the environment based on the marker attached to them, it is necessary to consider a change of marker's position or the addition of a marker because of moving the existed object or adding a new object. In this paper, we studied the method to estimate the artificial marker's global position for the visualization of environment. The system calculates the relative distance from a reference marker to others repeatedly to estimate the marker's position. When the marker's position is changed or new markers are added, our system can recognize the changed situation of the markers. To verify the proposed system, we attached 12 markers at regular intervals on the ceiling and compared the estimation result of the proposed method and the actual distance. In addition, we compared the estimation result when changing the position of an existing marker or adding a new marker.

• 제어로봇시스템학회논문지
• /
• 제12권9호
• /
• pp.883-890
• /
• 2006

Nowadays, CPS is used widely, especially in cases which need more precise position information, such as car navigation systems and even in the mobile robot for position measuring in the outdoor environment. RTK (Real-Time Kinematics) and DGPS (Differential Global Positioning System) have more precise accuracy than the general-purposed GPS. However can't easily use them because of high prices and large size of equipments. In order fur the mobile robot to obtain precise position information it is important that CPS receiver has portability and low price. In this study, we introduce a new GPS data acquisition system that offers the precise position data using the DGPS mechanism and satisfying low cost and portability. In addition to this, we propose an improved data compensation algorithm that offers more accurate position information to the outdoor mobile robot by compensating the error rate of CPS data measured from the three points with geometrical rotation and distance formula. Proposed method is verified by comparing with the precise real position data obtained by RTK. Proposed method has more than 70% performance enhancement.