• ETRI Journal
• /
• v.30 no.6
• /
• pp.774-782
• /
• 2008

An operational orbit determination (OD) and prediction system for the geostationary Communication, Ocean, and Meteorological Satellite (COMS) mission requires accurate satellite positioning knowledge to accomplish image navigation registration on the ground. Ranging and tracking data from a single ground station is used for COMS OD in normal operation. However, the orbital longitude of the COMS is so close to that of satellite tracking sites that geometric singularity affects observability. A method to solve the azimuth bias of a single station in singularity is to periodically apply an estimated azimuth bias using the ranging and tracking data of two stations. Velocity increments of a wheel off-loading maneuver which is performed twice a day are fixed by planned values without considering maneuver efficiency during OD. Using only single-station data with the correction of the azimuth bias, OD can achieve three-sigma position accuracy on the order of 1.5 km root-sum-square.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.4 no.2
• /
• pp.31-37
• /
• 1995

This study is focused on the prediction of appropriate tool life by clarifying the correlation between progressive tool wear and AE signal. when rcutting SM45C by End mill in machining center. First of all, end mill have a problem that position of sensor sticking because it is revolution tool, but I think that it can be bained specific character according to sticking Sensor in the Vise. Consequently, the following results have been obtained; 1. Each cutting speed of feed rate over 0.1mm had a tendency to increase linearly according to the RMSAE 2. The level of AE signal at the same cutting area was more sensitive to depth of cut tharn the variation of feed rate 3. In the range of cutting duringqr about 75minqr atqr cutting speed 27m/min flankqr wear turns up aboutqr 0.21mm, aboutqr 0.29mm in the caseqr of about 65minqr at 33/min, qr hereby RMSAE increased rapidly at 0.2mm flank wear, also AE-HIT and CUM-CNTS.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.632-635
• /
• 2002

In this paper, a general procedure to determine machine tool errors from the on-machine measurement (OMM) data is described. First, a parameterized error model of a machine tool is illustrated by approximating error components as linear function of axis positions, and a modified error model is proposed which includes backlash effects. To determine the unknown model coefficient vectors of the forward and backward error model, an artifact with 8 cutes is made and calibrated on CMM. Then, lower-left and upper-right cube corners are measured with a touch-trigger probe mounted on the machine tool spindle. Measured error data are used to determine the coefficient vectors. The positioning errors in the XY plane at the fixed z position are simulated for the forward and backward error model.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.4
• /
• pp.329-337
• /
• 2015

In this paper, a simulation based estimation method of energy consumption of the spindle and feed drives for the NC machine tool during the cutting process is proposed. To predict energy consumption of the feed drive system, position, velocity, acceleration and jerk of the table are analyzed based on NC data and then the power and energy are calculated considering friction force and mass of the stages. Energy consumption of the spindle is estimated based on models from acceleration motion of rotating parts, friction torque and power loss of motors. Moreover, simulation models of cutting power and energy for the material removal along the NC tool paths are proposed.

• Journal of Chest Surgery
• /
• v.19 no.2
• /
• pp.209-216
• /
• 1986

The purpose of this study is to predict postoperative lung function by perfusion lung scanning method. 40 patients who underwent lobectomy or pneumonectomy between 1983-1985 were analyzed. Mean preoperative FEV1 was 2.36 L in lobectomy cases and 1.73 L in pneumonectomy cases. Preoperative and postoperative lung function were measured by routine spirometry in sitting position. Perfusion lung scanning was performed by 99mTc-MAA radioisotope. Postoperative FEV1 and VC were predicted by the formula; Postoperative FEV1 [VC]=Preoperative FEV1 [VC] x percent function of regions of lung not to be resected. In this study, I concluded that perfusion lung scanning is a simple and useful method to predict postoperative ventilatory function after pneumonectomy of lobectomy.

• Journal of information and communication convergence engineering
• /
• v.9 no.5
• /
• pp.545-550
• /
• 2011

Trilateration is a typical method to locate an object, which requires inherently at least three prerecognized reference points. In some cases, owing to out of reachability to communication facilities the target node cannot be reachable always to three base stations. This paper presents a predictive method, which can identify the location of a moving target node in real time even though the target node could not get in touch with all three base stations. The method is based on the PIDcontrolled Moving Objects Spatio-Temporal Model Algorithm. Simulation results verify that this method can predict the moving direction of a moving target, and then combine with its past position information to judge accurately the location.

• Journal of computational fluids engineering
• /
• v.7 no.2
• /
• pp.33-42
• /
• 2002

Numerical estimation for concentration of mono-carbon oxygen (CO) gas inside an underground parking lot with auxiliary jet fans for enhancement of ventilation is carried out by using a commercial program. Main interest lies on the diagnosis of the present ventilation system including position and selection of auxiliarly fans in addition to main suppliers and exhausts. Details of both flows and concentration of CO gas that is most important component among car exhaust gases are illustrated in this investigation and those are presented for engineering construction of an underground parking pool. Prediction data of computational work is also validated by real measurements of concentration of CO gas.

• 한국전산유체공학회:학술대회논문집
• /
• 2001.10a
• /
• pp.76-83
• /
• 2001

The incompressible Reynolds-averaged Navier-Stokes equations are solved to predict the aerodynamic characteristics of an airship hull. The concept of pseudo-compressibility is employed to couple the pressure field with the velocity field. The upwind differencing method for spatial discretization and a line relaxation scheme for time integration are used. The flowfield around the low drag airship hull of fineness ratio 4 is solved for two Reynolds numbers with a wide range of angle of attack. The effect of Reynolds number and transition position is briefly examined together with the change in aerodynamic coefficients due to a gondola attached to the hull, and the results will be used as basic data for the design of a low drag airship hull.

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.934-937
• /
• 1992

The partial discharge signal can be used as the detection signal of the deterioration of the power transformer insulation. Detecting this signal, the insulation failure and the point, in which the partial discharge is generated, could be predicted. In this paper, we study to predict the point, and find that the cross correlation method could predict the point accurately. Also, experimental system and the results are presented here.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.3
• /
• pp.174-183
• /
• 2000

Non-Parallelism the axial direction occurs during grinding process of long slender shafts. The reason for the axial error is due to elastic deformation of the components, accumulation phenomenon of the grinding and wheel wear during the grinding process. The accumulation phenomenon, the size generation mechanism and the wheel wear process during traverse grinding result in complicated process at each step on the wheel surface. The grinding system stiffness obtained from the stiffness of the center on the tailstock and the workpiece varing according to the relative position of the wheel and the workpiece. Further more, the value of wheel wear increases as the grinding process advances. The above mentioned issues make the shape generation process during traverse grinding quite complicated. This research analyzes the shape generation process in the direction of the work spindle. First, the formulation of the grinding system stiffness was conducted and the simulation analysis method of the traverse grinding was established. Also, a measuring system for assessing the dimensinal accuracy of the workpiece has been developed.