• Journal of Electrical Engineering and Technology
• /
• v.3 no.4
• /
• pp.584-592
• /
• 2008

In this paper, we propose a new model of the magnetic control force exerted on the levitation object in magnetic levitation systems. The model assumes that the magnetic force is a function of the voltage applied to an electromagnet and the position of a levitation object. The function is not explicitly expressed but represented through a 2D lookup table constructed from the experimentally measured data. Unlike the conventional model that reveals only local characteristics of the magnetic force, the proposed model shows global characteristics satisfactorily. Specially devised measurement equipment is utilized in order to gather the data required for model construction. An experimental procedure to construct the model is presented. We apply the proposed model to designing a sliding mode controller for a lab-built magnetic system. The validity of the proposed model is illustrated by comparing the performances of the controller adopting the conventional model with that of the controller adopting the proposed model.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.49 no.3
• /
• pp.124-132
• /
• 2000

In this paper, presented are an active surface-micromachined silicon accelerometer, force rebalance loop using parametric robust control method, and experimental results with a real micromachined accelerometer. And finally, a robust controller of the form of PID compensator was designed to construct force rebalance loop. Through the frequency response analysis, it is shown that the loop guarantees appropriate stability and robustness. Experiments with a real accelerometer demonstrated that the proposed loop effectively controls the position of the accelerometer's proof mass. It also demonstrated that the resolution of the fabricated accelerometer is better than 1mg. Compared with a commercial accelerometer the proposed force rebalance silicon accelerometer showed better performances.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.6
• /
• pp.637-642
• /
• 2013

In this paper, an analysis results of towing force and towing points which are dominating factors to determine the behavior of towed ship are introduced. The towing force and towing points to achive the desired posture and its position of the towed vessel are derived based on simplified dynamics and linearization method. LQR algorithm for posture control is applied to linearized system and numerical simulation is also executed. Force based on COG(cneter of gravity) and gain of controller to achieve desired posture for target vessel are obtained by using Riccati matrix equation and pseudo inverse matrix is applied to analyze the relation between the derived force and its towing point. Based on this analysis method, towing force need to move the towed vessel from its initial position to target position can be calculated. The towing method including towing point and direction is also considered on this method. Finally, the relation between towing force and towing point is confirmed from the analysis and the results can be applied to arrangement of tug boats during salvage works.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.3 no.2
• /
• pp.244-250
• /
• 2003

In this paper, the relationship between a slave robot and the uncertain remote environment is modeled as the impedance to generate the virtual force to feed back to the operator. For the control of a tele-operated mobile robot equipped with camera, the tele-operated mobile robot take pictures of remote environment and sends the visual information back to the operator over the Internet. Because of the limitation of communication bandwidth and narrow view-angles of camera, it is not possible to watch the environment clearly, especially shadow and curved areas. To overcome this problem, the virtual force is generated according to both the distance between the obstacle and robot and the approaching velocity of the obstacle. This virtual force is transferred back to the master over the Internet and the master(two degrees of freedom joystick), which can generate force, enables a human operator to estimate the position of obstacle in the remote environment. By holding this master, in spite of limited visual information, the operator can feel the spatial sense against the remote environment. This force reflection improves the performance of a tele-operated mobile robot significantly.

• Journal of Ocean Engineering and Technology
• /
• v.9 no.1
• /
• pp.73-82
• /
• 1995

이 논문에서는 고차수 동력학적 표적모형을 이용하여 간단하고 우수한 성능을 지니는 위치와 힘의 추적제어법을 제안하였다. 이 표적모형은 위치오차와 힘오차의 상관관계를 자유운동을 위한 임피던스와 힘오차의 보상기로 모형화한다. 이들의 특성중, 적절한 보상기 설계에 의하여 위치입력과 힘입력 추적제어, 천이응담을 줄이기 위한 위치입력과 힘입력의 동시사용 및 매니퓰레이터의 접촉시에 부드러운 접촉을 위한 동특성의 연속성 유지 보상기 설계에 대하여 고찰하였다. 또한 접촉환경이 불규칙한 기하구조를 갖는 경우에,위치교란중 힘의 추적제어를 모의실험으로 보였다.

• Journal of the Korean Ceramic Society
• /
• v.40 no.10
• /
• pp.981-984
• /
• 2003

A novel linear ultrasonic motor for precision position control was designed and fabricated. It was composed of two piezoelectric actuators with longitudinal ultrasonic fluctuations and shaking beam. When two AC electric fields (Usinwt, Ucoswt) were applied to piezoelectric actuators respectively, the middle part of shaking beam had an elliptical trajectory. According to experimental results, the generative force was proportional to pre-load force but the speed of slider was in inverse proportion. And the bar of shaking beam had a same trajectory with simulation result.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.8
• /
• pp.615-618
• /
• 2016

This paper proposes a method to estimate vertical interaction force to the end of the surgical instrument by measuring reaction force at the part supporting the trocar. Relation between the force to the trocar and the interaction force is derived using the beam theory. The vertical interaction force is modeled as a function of the reaction force to the trocar and the distance between the drape plate and the trocar. Experimental results show that error is induced by the asymmetric shape of the trocar tip because contact position between the instrument and the trocar tip is changed depending on the direction of the interaction force. The theoretical relation, therefore, is compensated and reduced. Average $L_2$ relative error of the estimated force in the x-direction and the y-direction is 5.81 % and 5.99 %, respectively.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.54 no.7
• /
• pp.428-436
• /
• 2005

In this paper, we introduce an adaptive control method to improve the position accuracy and reduce nonlinear friction effects for the linear motion servo system with the nonlinear friction. The considered system plant included not only the variation of the mass of mover but also the friction change by the normal force. We also designed an adaptive controller with the mass estimator and the compensator by observing the variation of normal force. The effectiveness and system performances for the proposed control method in this paper show to improve than other control methods through numerical simulations.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.4
• /
• pp.290-296
• /
• 2005

This paper presents the implementation of a crack tracking mobile robot. The crack tracking robot is built for tracking cracks on the pavement. To track cracks, crack must be detected by laser and camera sensors. Laser sensor projects laser on the pavement to detect the discontinuity on the surface and the camera captures the image to find the crack position. Then the robot is commanded to follow the crack. To detect crack position correctly, neural network is used to minimize the positional errors of the captured crack position obtained by transformation from 2 dimensional images to 3 dimensional images.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.3
• /
• pp.1166-1176
• /
• 2017

Estimation errors of the rotor speed and position in sensorless control systems of Permanent Magnet Synchronous Motors (PMSM) will lead to low efficiency and dynamic-performance degradation. In this paper, a parallel-type extended nonlinear observer incorporating the nominal parameters is constructed in the stator-fixed reference frame, with rotor position, speed, and the load torque simultaneously estimated. The stability of the extended nonlinear observer is analyzed using the indirect Lyapunov's method, and observer gains are selected according to the transfer functions of the speed and position estimators. Taking into account the parameter inaccuracies issue, explicit estimation error equations are derived based on the error dynamics of the closed-loop sensorless control system. An equivalent flux error is defined to represent the back Electromotive Force (EMF) error caused by the inaccurate motor parameters, and a compensation strategy is designed to suppress the estimation errors. The effectiveness of the proposed method has been validated through simulation and experimental results.