• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2005년도 제31회 KOSCO SYMPOSIUM 논문집
• /
• pp.314-319
• /
• 2005

In this study, the combustion characteristics were investigated with the variation of design factors on multiple slit gas burner. The design factors consist of slit height, width, spacing, and inner length. The combustion characteristics were made analysis of the CO emission and NOx emission by using CO analyzer and NOx analyzer. The lower perimeter to area and the narrow spacing extends the lift-flame limit. The CO emission increases with the increasing perimeter to area ratio at the same condition. The NOx emission is found to be less significant with the port perimeter to area ratio. The flame interference might highly depend on the spacing and port perimeter to area ratio, and it also affects the burner performance.

• 대한기계학회논문집B
• /
• 제31권6호
• /
• pp.547-557
• /
• 2007

This study was conducted to investigate the flow and combustion characteristic of the experimental burner which was manufactured for the reflection of the oven and broil burner features. As slot shape, spacing between slots, and slot arrangement of the exit area which emits the mixing gas are different in case of oven burners and broil turners, the purpose of this study is to know the affection of the flame interaction and combustion characteristic according to the change of shape factors such as slot shape, slot arrangement, and slot-to-slot spacing. With no relation of the slot shape, as the spacing between slots became narrow, the occurrence of a lift-flame was delayed. So the combustion was possible in the leaner region, but the appearance of yellow-tip became a little fast. Slit slot port had the broadest operating range among the other slot shapes. Specially, from the side of lift-flame, as the jet that spreads downstream in the longitudinal slot was nearly circular just a few slot lengths away from the orifice, slot-to-slot spacing of the Slit port was closer than the other ports. These results could be expected through the computer numerical method and had a good agreement. As the spacing between slots increased, in case of Slit and Mix port, NOx emission rate was constant or decreased, but the NOx emission of Hole port was increased. CO emission rate of Slit and Hole port was increased as the slot-to-slot spacing was broadened.

• 한국항해항만학회지
• /
• 제37권3호
• /
• pp.251-256
• /
• 2013

This paper is mainly concerned with the ship-bank interaction by model test. The experiments for the characteristics of hydrodynamic interaction forces and moments between vessel and bank with a mound were carried out in the seakeeping and maneuvering basin. A series of tests were carried out with ship model in parallel course along a vertical sidewall with a mound with varying lateral spacing between model ship and sidewall, length of sidewall and water depth. From the experimental results, it indicated that the hydrodynamic interaction effects increase as length of sidewall with a mound increases. Furthermore, for lateral spacing less than about 0.2L between vessel and bank, it can be concluded that the bank effects increase largely as the lateral spacing between vessel and bank decreases. However, for spacing between vessel and bank more than about 0.3L, the interaction effects increase slowly as lateral spacing decreases. Also, for the water depth to draft ratio(h/d) less than about 1.5, the hydrodynamic interaction effects increase dramatically as h/d decreases.

• 한국항해학회지
• /
• 제21권2호
• /
• pp.41-46
• /
• 1997

In this paper, important parameters of fast catamaran hull form are investigated. Praticularly, length-displacement ratio, demihull spacing, trim and hull form on resistance performance are analyzed. Also, the usefulness of SHIPFLOW program for hull form development is studied. The computed results by using SHIPFLOW program are compared with experimental results in model test.

• 한국항해항만학회지
• /
• 제29권9호
• /
• pp.783-788
• /
• 2005

This study provided the status and efficiency of the domestic wastewater sea outfalls based on the previous numerical and experimental studies for the analysis of the buoyant discharges from Rosette diffuser in shallow water. The VISJET model and the hybrid model proposed by Kim (2002) can be proper models for the domestic sea outfalls. The experimental results show that the merging height for MBR and MIR depends on the riser diameter and spacing between risers, and the bending characteristics of the buoyant discharges in still ambient water have significant impacts on the dilution. The current wastewater outfall systems in Korea are not effective for the environmental aspect due to the low discharge water depth. The strategies to reduce the contamination near the domestic wastewater outfalls were found to require the sufficient discharge water depth, proper diffuser location considering the tidal currents, enough riser diameter, and sufficient spacing between risers.

• 한국구조물진단유지관리공학회 논문집
• /
• 제27권5호
• /
• pp.40-48
• /
• 2023

본 논문에서는 항만 계류시설 중 대표적인 구조형식인 케이슨식 안벽의 장기 거동 특성을 분석하기 위하여, 센서 기반 모니터링 시스템을 구축하고, 약 10개월간의 데이터를 검토하였다. 문헌을 바탕으로 항만시설물의 피해 원인 및 유형을 분류하였으며, 이에 적합한 센서 및 계측 시스템을 선정, 현장에 설치하여 주기적으로 데이터를 확보하였다. 확보한 데이터는 LTE 통신망으로 서버에 전달 및 저장된다. 현장상황을 고려하여 경사계, 이격거리계, 침하계를 설치하였으며, 서로 다른 케이슨간의 비교를 위하여 2개 함을 대상으로 센서를 부착하였다. 계측된 센서 데이터와 기온 및 인근 해역에서 계측된 조위 데이터의 상관성을 비교하였다. 이격거리계와 침하계의 경우 온도에 따른 영향이 지배적으로 나타난 반면, 경사계는 상대적으로 덜 민감한 경향을 보였다. 온도가 약 50도 변화 할 때, 변위는 10mm, 침하는 2mm, 기울기는 0.1도 가량 변화하였다. 한편, 조위 데이터와는 뚜렷한 상관성을 보이지 않았으며, 추후 심도있는 분석이 필요하다고 판단된다. 계측된 데이터의 특성을 바탕으로 중력식 안벽에 이상상태가 발생하였을 때 이를 탐지할 수 있는 알고리즘을 개발할 수 있으며, 이를 위한 데이터베이스를 구축하였다. 중력식 안벽 대상 지속적인 장기 데이터 확보 및 분석을 통하여, 재해 및 재난 발생 시 구조물의 안전성 및 사용성을 객관적으로 평가할 수 있을 것으로 기대된다.

• 한국항해항만학회지
• /
• 제38권6호
• /
• pp.561-565
• /
• 2014

This paper is mainly concerned with the interaction effects between two vessels and sidewall with a mound. Experimental study on hydrodynamic forces between ship and sidewall with a mound was already shown in the previous paper, measured by varying the distances between ship and sidewall. The ship maneuvering simulation was conducted to find out the minimum safe distance between vessels, which is needed to avoid sea accident in confined waters. From the inspection of this investigation, it indicates the following result. When and if one vessel passes the other vessel through the proximity of sidewall with a mound, the spacing between two vessels is needed for the velocity ratio of 1.2, compared to the case of 1.5. Also, for the case of ship-size estimation, the ship maneuvering motion is more affected by interaction effects for the overtaken small vessel, compared to the overtaking large vessel.

• ETRI Journal
• /
• 제38권5호
• /
• pp.903-910
• /
• 2016

We propose a novel multi-stack (MS) technique for a compact and wideband electromagnetic bandgap (EBG) structure in high-speed multilayer printed circuit boards. The proposed MS technique efficiently converts planar EBG arrays into a vertical structure, thus substantially miniaturizing the EBG area and reducing the distance between the noise source and the victim. A dispersion method is presented to examine the effects of the MS technique on the stopband characteristics. Enhanced features of the proposed MS-EBG structure were experimentally verified using test vehicles. It was experimentally demonstrated that the proposed MS-EBG structure efficiently suppresses the power/ground noise over a wideband frequency range with a shorter port-to-port spacing than the unit-cell length, thus overcoming a limitation of previous EBG structures.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2013년도 춘계학술대회
• /
• pp.29-30
• /
• 2013

The hydrodynamic interaction forces and moments induced by the vicinity of bank on a passing vessel are known as bank effects. In this research, the characteristic features of interaction acting on a passing vessel in the proximity of a semi-circle bank wall are described and illustrated, and the effects of ship velocity, water depth and the lateral distance between ship and semi-circle bank wall are summarized and discussed.

• Water Engineering Research
• /
• 제3권2호
• /
• pp.93-111
• /
• 2002

In this paper, mixing characteristics and dilution of the merging buoyant discharges from array of multiple jets has been extensively studied in the hydraulic model experiments. New equations for dilution, which include the merging effects correctly, were derived. Experiments were constructed in a 20-m long, 4.9-m wide and 0.6-m deep flume, and the model diffuser was manufactured to indicate the typical characteristics of the existing ocean wastewater outfall in South Korea. Buoyant discharge from the diffuser was reproduced using heated water. Water temperature was measured using CC-Type thermocouple sensors, which were connected to a 40-channel data logger. Experimental results show that merging between ports in a particular riser is dependent upon the discharge densimetric Froude number, whereas merging between two ports which are facing each other at 90$\circ$ at the adjacent risers is dependent upon the discharge densimetric Froude number and distance from the port and port spacing. Centerline dilution increase with distance from the port outlet until two plumes has merged. However, after merging occurs, increase of the centerline dilution almost stops. Further distance from the position where merging occurs, centerline dilution increases again.