• Journal of Korean Medicine for Obesity Research
• /
• v.24 no.1
• /
• pp.87-93
• /
• 2024

Objectives: Obesity is a globally prevalent public health issue. Hence, there is a need for the development of safer and more effective anti-obesity drugs. Lythrum salicaria, a traditional medicinal herb used for centuries, has been reported to improve lipid metabolism and fat accumulation. It also has a low toxicity profile. Therefore, its potential as a functional ingredient in health functional foods needs to be evaluated. Methods: In this randomized, double-blind, placebo-controlled clinical trial, 90 participants will be randomly assigned to either the experimental or control group. Each subject will orally receive L. salicaria extract (1,350 mg/day) (500 mg L. salicaria+850 mg lactose as vehicle) or lactose (1,350 mg/day) as a hard capsule formula for 84 days (12 weeks). The primary outcome will be body fat mass (kg), which will be assessed using dual-energy x-ray absorptiometry (DXA) (performed only at visits 2 and 4). Secondary outcomes include body mass index, body weight, waist-to-hip ratio, body fat percentage (%) measured using DXA, lean body mass (kg) measured using DXA (assessed only at visits 2 and 4), lipids (total cholesterol, triglyceride, high-density lipoprotein cholesterol, and calculated low-density lipoprotein cholesterol), free fatty acid, high sensitivity C-reactive protein, adiponectin, and leptin. Conclusions: This protocol will be implemented after approval of Institutional Review Board of Pusan National University Korean Medicine Hospital (approval number: PNUKHIRB-2022-08-002) and registration with the Korean National Clinical Research Information Service (CRIS) (CRIS-KCT0008060). The results of this trial will provide potential of L. salicaria as a new anti-obesity functional food with fat-reducing effects and low toxicity.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.30 no.4
• /
• pp.340-347
• /
• 2024

In this study, an expert survey was conducted using the Delphi technique to select items and indicators for evaluation before installing educational facilities in the marine fisheries safety field, in which the educational infrastructure gap between regions is wide. Seven indicators were selected as geographic, social, and administrative factors. In order to objectively evaluate each indicator, evaluation indicators that could be evaluated using public data such as the "Comprehensive National Balanced Development Information System" and "National Statistical Portal" were developed. The Analytic Hierarchy Process (AHP) method was applied to select the weight for each indicator, resulting in 10 most important influencing factors on the selection of the location of educational facilities of the Marine Fisheries Safety Education Facilities: the distribution of marine officers, access to high-speed railways, the number of small ships less than 5 tons, access to highways interchange, the distribution of fishing boats, the close relationship of related industries, the planned new port, the distribution of commercial ports, the number of marine leisure riders, and the availability of long-term land leases in local government councils. The location evaluation index of marine and fishery safety education facilities developed in this study can be used to evaluate each region using national public data, and has the advantage of enabling objective evaluation. Therefore, it is judged that this evaluation index can be used to verify the feasibility of installing marine fisheries safety education facilities as well as other marine-related facilities.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.6
• /
• pp.327-340
• /
• 2017

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2016. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of flow, heat and mass transfer, the reduction of pollutant exhaust gas, cooling and heating, the renewable energy system and the flow around buildings. CFD schemes were used more for all research areas. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results of the long-term performance variation of the plate-type enthalpy exchange element made of paper, design optimization of an extruded-type cooling structure for reducing the weight of LED street lights, and hot plate welding of thermoplastic elastomer packing. In the area of pool boiling and condensing, the heat transfer characteristics of a finned-tube heat exchanger in a PCM (phase change material) thermal energy storage system, influence of flow boiling heat transfer on fouling phenomenon in nanofluids, and PCM at the simultaneous charging and discharging condition were studied. In the area of industrial heat exchangers, one-dimensional flow network model and porous-media model, and R245fa in a plate-shell heat exchanger were studied. (3) Various studies were published in the categories of refrigeration cycle, alternative refrigeration/energy system, system control. In the refrigeration cycle category, subjects include mobile cold storage heat exchanger, compressor reliability, indirect refrigeration system with $CO_2$ as secondary fluid, heat pump for fuel-cell vehicle, heat recovery from hybrid drier and heat exchangers with two-port and flat tubes. In the alternative refrigeration/energy system category, subjects include membrane module for dehumidification refrigeration, desiccant-assisted low-temperature drying, regenerative evaporative cooler and ejector-assisted multi-stage evaporation. In the system control category, subjects include multi-refrigeration system control, emergency cooling of data center and variable-speed compressor control. (4) In building mechanical system research fields, fifteenth studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, renewable energies, etc. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which could be help for improving the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the analyses of indoor thermal environments controlled by portable cooler, the effects of outdoor wind pressure in airflow at high-rise buildings, window air tightness related to the filling piece shapes, stack effect in core type's office building and the development of a movable drawer-type light shelf with adjustable depth of the reflector. The subjects of building energy were worked on the energy consumption analysis in office building, the prediction of exit air temperature of horizontal geothermal heat exchanger, LS-SVM based modeling of hot water supply load for district heating system, the energy saving effect of ERV system using night purge control method and the effect of strengthened insulation level to the building heating and cooling load.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.2
• /
• pp.175-185
• /
• 2020

Quantitative and qualitative surveys were conducted during scuba diving activity between May 2017 and June 2017 in order to analyze spring marine algal community structure at Gijang-gun, Busan. A total of 121 species including 13 (10.7 %) Chlorophyta, 18 (14.9 %) Phaeophyta, and 90 (74.4 %) Rhodophyta were identified. The species count in the subtidal zone (110 species) was twice as high as in the intertidal zone (56 species). In terms of regions, 88,76, and 75 species were found in Mundong, Gongsu, and Daebyeon, respectively. Mean biomass for the whole study area was 1,501.5 g·m^-2, higher for the subtidal zone (1,869.4 g·m^-2) than for the intertidal zone (1,133.5 g·m^-2). Mean biomass by region values were 2,234.0 g·m^-2, 1,228.1 g·m^-2, and 1,044.4 g·m^-2 for Mundong, Gongsu, and Daebyeon, respectively. Ulva australis, Sargassum thunbergii, and Corallina pilulifera had high biomass in the intertidal zone, while Sargassum macrocarpum, Undaria pinnatifida, and Phycodrys fimbriata had high biomass in the subtidal zone. The composition ratio of marine algal functional forms suggests that the entire study area had 'Low' status, and all sites fell within 'Low' to 'Moderate' status. Results indicate that opportunistic species are widely distributed throughout the Gijang-gun coast, hence potential effects of disturbance and environmental pollution should be considered. Seaweed farming in particular - a major activity along the Gijang-gun coast -, together with effects of other anthropogenic activities such as national fishing port development and the coastal improvement project, could have long-term effects on marine algal communities. Therefore, long-term monitoring and management plans for marine algal communities will be required.

• Korean Journal of Microbiology
• /
• v.51 no.4
• /
• pp.374-381
• /
• 2015

Occurrences of coastal dredged materials are ever increasing due to port construction, navigational course maintenance and dredging of polluted coastal sediments. Ocean dumping of the coastal dredged materials has become virtually prohibited as London Treaty will be enacted as of the year 2012. It will be necessary to treat and recycle the dredged materials that may carry organic pollutants and heavy metals in a reasonable and effective process: collection of the dredged materials, liquid and solid separation, and treatment of organic compounds and heavy metals. In this study we have developed a continuous bioreactor system that can treat a mixture of silt and particulate organic matter using a microbial consortium (BM-S-1). The steady-state operation conditions were: pH (7.4-7.5), temperature ($16^{\circ}C$), DO (7.5-7.9), and salt concentration (3.4-3.7%). The treatment efficiencies of SCOD, T-N and T-P of the mixture were 95-96%, 92-99%, and 79-97%. The system was also effective in removal of heavy metals such as Zn, Ni, and Cr. Levels of MLSS during three months operation period were 11,000-19,000 mg/L. Interestingly, there was little sludge generated during this period of operation. The augmented microbial consortium seemed to be quite active in the removal of the organic component (30%) present in the dredged material in association with indigenous bacteria. The dominant phyla in the treatment processes were Proteobacteria and Bacteroidetes while dominant genii were Marinobacterium, Flaviramulus, Formosa, Alteromonadaceae_uc, Flavobacteriaceae_uc. These results will contribute to a development of a successful bioremediation technology for various coastal and river sediments with a high content of organic matter, inorganic nutrients and heavy metals, leading to a successful reuse of the polluted dredged sediments.

• KDI Journal of Economic Policy
• /
• v.12 no.1
• /
• pp.93-110
• /
• 1990

The basic purpose behind the Korean government's policy toward the Korean deep sea fishing industry is to limit growth of the industry. Therefore, the regulations on the industry are generally restrictive and interventionist. The policy is intended to maintain high domestic fish prices in order to protect the domestic coastal fishing industry. Some regulations have also been introduced to maintain "industrial order." Each fishing vessel must obtain a government permit for operation. The permit specifies the kind of fish it can catch, the area of sea in which it can operate, and the port at which it can unload its catches. The number of permits government issues each year is based on the estimates of the demand increase calculated by government officials, and the government traditionally has been fairly conservative in its estimation, reflecting its concern for fish price stabilization, which actually implies a gradual increase of the prices. There is also a restriction on importing vessels from abroad. This regulation is intended to protect the domestic shipbuilding industry. However, this regulation has resulted in an unusually high average age of Korean fishing vessels, causing fishing costs to rise. These regulations and the inflexible response of the regulators to changing circumstances have resulted in many problems: i) high domestic fish prices, which are, to some extent deliberately, inflated to three or four times the level of international prices, resulting in huge consumer welfare losses; ii) over-exploitation of coastal fish resources; iii) provision of a hospitable environment for inefficient firms to survive, which is especially evident from the fact that, despite the high fish prices in Korea, most of the firms in the industry do not enjoy high profitability. It also must be pointed out that the actual beneficiaries of the high fish prices are the large operators, who are protected from competition and provide most of the fish for domestic consumption, rather than the low-income fishing households and small coastal operators whom the policy was originally designed to help. This study proposes a set of regulatory reforms and policy changes which could Promote competition and equity within the industry and allow firms to reduce costs and increase productivity. Such changes can make the industry more efficient and internationally competitive. Major proposals are, among others: minimization of bureaucratic discretion in issuing fishing permits and maintaining transparency in the governments' decision-making processes; reduction of the government permit specifications and simplification of the operational categories within the industry; and removal of the restrictions on importing foreign fishing vessels.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.10 no.1
• /
• pp.1-7
• /
• 2005

Tidal flats have been regarded to carry out transformation and removal of land-derived organic matter, and this purifying capability of organic matter by tidal flats is one of very important reasons for their conservation. However, integral biogeochemical studies on production and decomposition of organic matter by benthic microbes in tidal flats have been absent in Korea, although the information is indispensable to quantification of the purifying capability. Our major goals in this multidisciplinary research were to understand major biogeochemical processes and rates mediated by diverse groups of microbes dominating material cycles in the tidal flats, and to assess the contribution of benthic microbes to removal of organic matter and nutrients in the tidal flats. Our study sites were Ganghwa and Incheon north-port tidal flats that had been regarded as naturally well reserved and organically polluted, respectively. Our research group measured over 3 years primary production, biomass and community structure of primary producers, abundance and production of bacteria, enzyme activities, distribution of protozoa and protozoan grazing rates, rates of denitrification and sulfate reduction, early sediment diagenesis, primary production and respiration based on oxygen microelectrode. We analyzed major features of each biogeochemical process and their interactions. The results are compiled in the following articles in this special issue: An (2005), Hwang and Cho (2005), Mok et at. (2005), Na and Lee (2005), Yang et at. (2005), and Yoo and Choi (2005).

• The Korean Journal of Malacology
• /
• v.24 no.2
• /
• pp.153-159
• /
• 2008

We investigated artificial mass seed production of a Chinese scallop, Patinopecten yessoensis, in 2004. The GSI(gonad somatic index) of the Chinese scallop, P yessoensis was 17.2 on mid-February, 20.2 on mid-March, while that of Korean scallop, P yessoensis was 6.9 on mid-February, 10.8 on mid-March. Matured 120 females and 350 males were selected for artificial mass production. They were exposed in air for 1 hr at over $20^{\circ}C$, and placed into a spawning tank(20 ton) containing sea water treated with UV radiation at $12^{\circ}C$. We gained a total of 228,000 thousand scallop embryos between March 10th and 15th, and reared larvae at the indoor tank during 25 days. When the mean shell length of larvae reached 250 ${\mu}m$ and they have eye-spots, the number of pre-settling larvae was 47,500 thousand. We gained 1,850 thousand attached scallop spats from two kinds of collectors. Attached spats were reared in indoor tank for different periods from 5 days to 60 days. They were divided into 5 groups according to the length of reared days. Each group of attached spats was moved to intermediate rearing sites at Yangyang fishing port in Gangreung-city for acclimation to ocean environments. The highest survival rate of attached spats was 13.0% shown at the group reared for 12 days, but the significant difference in their growth was not found between the groups. The shell length of artificial attached spats increased from 0.9 ${\mu}m$ on July 10th to 24.7 ${\mu}m$ on December 16th with the survival rate of 85.0% while that of natural attached spats increased from 0.6 ${\mu}m$ on July 10th to 23.9 ${\mu}m$ on December 16th with the survival rate of 85.7%.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.4
• /
• pp.206-225
• /
• 2019

This paper examines the trade and development aspects of glass mirrors through the literature records of the Joseon Dynasty, and studies the characteristics of existing glass mirror crafts by referring to the terms and types shown in the literature. The glass mirror in the records had called western mirrors(西洋鏡, 洋鏡), glass mirrors(玻璃鏡, 玻瓈鏡), stone mirrors(石鏡), etc. Glass mirrors were imported mainly through trade with Russia and the Qing Dynasty since the 17th century and were banned from importation in the late Joseon Dynasty. These mirrors were something new that caused a great stirring in Joseon society in the 18th century, and in the 19th century, it grew larger as a commodity needed for everyday life, especially with trade with Japan. At that time, glass mirrors were used for various purposes, such as installing large glass at a store, which were not the standard mirror usage of confirming one's appearance. These mirrors surprised Koreans in Joseon who experienced them at Yanjing Liulichang(燕京 琉璃廠) in the 18th and 19th centuries. As a result, the demand for glass mirrors rapidly increased and quickly surpassed that of bronze mirrors. Consequentially, new crafts using glass mirrors instead of bronze mirrors in Joseon began to be produced and used after the 18th century. In particular, integrated flat boards of glass mirrors were developed as crafts used indoors. It was convenient to use the hair comb box, a long-time presence in Joseon society, with the bronze mirror. This kind of mirror remained apparent in various genre paintings, including the Taepyeong Seongsido(太平城市圖, 'A Thriving City in a Peaceful Era') collected the National Museum of Korea which reflect its populism of the times. Also, the Mirror Stand(鏡臺) used in the Qing Period was produced in Joseon, but there was a difference in the way of making the drawers and box shapes between two nations. On the other hand, the Face Mirror(面鏡) was made to look at the face. Various crafts made with the aesthetic sense of Joseon, such as the ox horn inlaying craft technique, were produced with auspicious designs. In the 19th century, glass mirrors were imported from European countries, such as France, Denmark, the Netherlands, and the United Kingdom, however after the end of the 19th century Japanese crafts were popular. Glass mirrors, which were popular in the Meiji and Taisho eras of Japan, were imported and also the Mirror Screen(鏡屛) using large glass mirrors were used. In particular, the mirror screen had developed wood furniture since the previous time, which were used for banquets and large spaces, such as the drawing room, and were imported from China and Japan. In addition, the western architectural effect of attaching a mirror to the wall was also attempted to adjust the brightness of the space and introduce another image and scenery in the mirror. This was done at Deoksugung Palace's Seokjojeon.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.28 no.6
• /
• pp.256-268
• /
• 2016

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2015. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering were carried out in the areas of flow, heat and mass transfer, cooling and heating, and air-conditioning, the renewable energy system and the flow inside building rooms. Research issues dealing with air-conditioning machines and fire and exhausting smoke were reduced. CFD seems to be spreading to more research areas. (2) Research works on heat transfer area were carried out in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the economic analysis of GHG emission, micro channel heat exchanger, effect of rib angle on thermal performance, the airside performance of fin-and-tube heat exchangers, theoretical analysis of a rotary heat exchanger, heat exchanger in a cryogenic environment, the performance of a cross-flow-type, indirect evaporative cooler made of paper/plastic film. In the area of pool boiling and condensing, the bubble jet loop heat pipe was studied. In the area of industrial heat exchangers, researches were performed on fin-tube heat exchanger, KSTAR PFC and vacuum vessel at baking phase, the performance of small-sized dehumidification rotor, design of gas-injection port of an asymmetric scroll compressor, effect of slot discharge-angle change on exhaust efficiency of range hood system with air curtain. (3) In the field of refrigeration, various studies were carried in the categories of refrigeration cycle, alternative refrigeration/energy system, system control. In the refrigeration cycle category, a cold-climate heat pump system, $CO_2$ cascade systems, ejector cycles and a PCM-based continuous heating system were investigated. In the alternative refrigeration/energy system category, a polymer adsorption heat pump, an alcohol absorption heat pump and a desiccant-based hybrid refrigeration system were investigated. In the system control category, turbo-refrigerator capacity controls and an absorption chiller fault diagnostics were investigated. (4) In building mechanical system research fields, eighteen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the user and location awareness technology applied dimming lighting control system, the lighting performance evaluation for light-shelves, the improvement evaluation of air quality through analysis of ventilation efficiency and the evaluation of airtightness of sliding and LS window systems. The subjects of building energy were worked on the energy saving estimation of existing buildings, the developing model to predict heating energy usage in domestic city area and the performance evaluation of cooling applied with economizer control. The studies were also performed related to the experimental measurement of weight variation and thermal conductivity in polyurethane foam, the development of flame spread prevention system for sandwich panels, the utilization of heat from waste-incineration facility in large-scale horticultural facilities.