• Journal of Industrial Technology
• /
• v.40 no.1
• /
• pp.19-23
• /
• 2020

In this paper, we proposed a PC-based CNC control system using EtherCAT-based servo drive and I/O device. The default communication of LinuxCNC is a parallel port, and data processing with high bandwidth is impossible. However, it is possible to apply various bandwidth devices through the application of EtherCAT, one of the industrial Ethernet communications with high bandwidth. Therefore, the hardware control method of LinuxCNC was applied through EtherCAT communication from the existing parallel port. Finally, through HAL configuration, I/O device operation check and 3-axis motion control proved the LinuxCNC system with EtherCAT.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.3
• /
• pp.35-43
• /
• 2006

A four-stroke four-cylinder turbocharged diesel engine can be fitted with various types exhaust system. In this paper, the impacts of exhaust system design on scavenging performance and wave action characteristic during valve overlap are investigated by using one-dimensional gas dynamic code. This work shows that a huge reflected exhaust pressure waves which reaches the exhaust port during valve overlap period is crucial design factor which determines quality and quantity of the fresh charge. Hence pressure wave that reaches the exhaust port of the cylinder during the valve overlap sequence should be weakened for good scavenging performance. This paper describes advantages and disadvantages of the various exhaust systems applied to a turbocharged and intercooled 4-cylinder diesel engine system in terms of scavenging efficiency and engine performance. To verify the computational results, experimental comparison has also performed.

• Journal of electromagnetic engineering and science
• /
• v.10 no.4
• /
• pp.282-289
• /
• 2010

A simplified, practical vector network analyzer (VNA) that uses mature radio-over-fiber technology has been designed and demonstrated. The measurement concept allows the full S-parameters of a microwave device (or antenna) to be obtained while minimizing the detrimental effects of electrical cables, which are replaced with a photonic link. A variety of high-frequency light modulation schemes with frequency sweeping capabilities are presented to realize a one-path (single, forward), frequency-multiplied optical link for VNA applications. Using the photonic one-path link, full two-port S-parameters have been extracted based on five-term error modeling, which has half the error terms compared with the standard duplex configuration. The S-parameters of a microwave filter and antenna measured using frequency-multiplied optical links are found to be in good agreement with those obtained using a conventional VNA.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1995.11a
• /
• pp.125-152
• /
• 1995

An Integrated Bridge System (IBS) is not an officially defined term, but a concept of which integrates on a consol at bridge the primary functions of stand-alone navigational aids and communication instruments or of stand-alone units which are integrated i.e. ARPA ECDIS It aims to enable officers on navigational watch to perform their duty without impairing proper lookout. IBS has been taking shape through a rapid development of navigation and communication systems in relation with bridge configuration bridge work station and one man bridge operation system. IBS related matters have been considered for years and is on the agenda of the International Maritime Organization(IMO) for its technical details and safety aspect of possible one-man watchkeeping at night. However IMO has made it clear that human element should be the key factor in considering IBS and single watchkeeping issue. In the development of IBS ergonomic element and human psychological aspect have been more emphasized than technical requirements. This paper refers to documents presented to the IMO and its progress made in various IMO technical meetings on the development of IBS which is perceived as an effective aid to proper bridge lookout and those standards adopted by classification societies on the composition of workstation at bridge in order to identify the international trend on regulating required equipment function of workstation of IBS the regulatory review process and technical recommendations related thereto.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.10a
• /
• pp.95-104
• /
• 2006

A floating-type wave power pump is a device which sends air into water by using wave power. The floating-type wave power pump has the new configuration composed of a curved surface reflection board, a slope, and phase plates. As a result of a water-tank experiment it turned out that the floating-type wave power pump with a curved surface reflection board and a slope raised power and efficiency in the wide wavelength waves. The result of a marine experiment was also preferable. The floating-type wave power pump sends air into the sea by using wave power, so it can be used for the improvement of marine environment. In addition, the floating body constituted of a curved surface reflection board, a slope, and phase plates, is effective as a device to utilize the energy of a wave. Therefore, it can be widely used for a wave power generation, pumping up deep seawater.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.9
• /
• pp.57-64
• /
• 2018

In recent years, a new approach to cyber security, called the moving target defense, has emerged as a potential solution to the challenge of static systems. In this paper, we design a protected server network with a large number of decoys to anonymize the protected servers that dynamically mutate their IP address and port numbers according to Hidden Tunnel Networking, which is a network-based moving target defense scheme. In the network, a protected server is one-to-one mapped to a decoy-bed that generates a number of decoys, and the decoys share the same IP address pool with the protected server. First, the protected server network supports mutating the IP address and port numbers of the protected server very frequently regardless of the number of decoys. Second, it provides independence of the decoy-bed configuration. Third, it allows the protected servers to freely change their IP address pool. Lastly, it can reduce the possibility that an attacker will reuse the discovered attributes of a protected server in previous scanning. We believe that applying Hidden Tunnel Networking to protected servers in the proposed network can significantly reduce the probability of the protected servers being identified and compromised by attackers through deploying a large number of decoys.

• Journal of Navigation and Port Research
• /
• v.47 no.2
• /
• pp.57-65
• /
• 2023

In 2017, the International Maritime Organization (IMO) adopted MSC.428 (98), which recommends establishing a cyber-risk management system in Ship Safety Management Systems (SMSs) from January 2021. The 27th International Association of Marine Aids to Navigation and Lighthouse Authorities (IALA) also discussed prioritizing cyber-security (cyber-risk management) in developing systems to support Maritime Autonomous Surface Ship (MASS) operations (IALA guideline on developments in maritime autonomous surface ships). In response to these international discussions, Korea initiated the Korea Autonomous Surface Ship technology development project (KASS project) in 2020. Korea has been carrying out detailed tasks for cybersecurity technology development since 2021. This paper outlines the basic concept of ship network security equipment for supporting MASS ship operation in detailed task of cybersecurity technology development and defines ship network security equipment interface for MASS ship applications.

• Journal of Korean Port Research
• /
• v.8 no.2
• /
• pp.37-56
• /
• 1994

The effects of wave energy focusing by a submerged berm type of structure is examined. The fundamental idea is based on the phenomenon of refraction by a lens-shaped crescent structure which results in the focusing of wave energy on the center line of the structure. The shape of the submerged structure is a complex curve combining circular with elliptical elements. Based on the design procedure, a special configuration of structure(termed herein as a triple crescent structure) is introduced. Next, some hydraulic model tests are performed to confirm the wave focusing effect in laboratory. In addition, in order to interpret the wave focusing performance behind the structure, a numerical procedure by the hybrid element method is used on the basis of the conventional mild slope equation but modified and extended to allow for steeper bottom slopes and higher curvature. The modified refraction and diffraction provide additional mechanism for wave height amplification and the maximum amplification for triple crescent structure is presented. It also allows for the possibility of wave energy scattering with the change of the incident wave direction. Comparisons with previous theoretical results involving a submerged crescent shape structure are described.

• Journal of Navigation and Port Research
• /
• v.40 no.1
• /
• pp.43-50
• /
• 2016

Amid of the logistics hub center competition is going to intensifying between the world major port, it is essential to pre-occupied the base in the logistics hub world take advantage of advanced technology of logistics equipment than other ports. In existing container terminal, when container moves the terminal use the omnidirectional and directional antenna in order to exchange data information on the basis of 802.11 wireless network system. Case of loading height of exceeding, the blind sport will occur and a limited frequency channel can't help using in the area. A limited frequency channel usage and nested areas happen to use the closed terminal, it has a great influence to operate the terminal working. In this paper, LTE network is configured provided by the specified company ('L' Corp,.Ltd) and terminal data extracted through LBO (Local Breakout) in the cell site which is configured directly with container terminal operation server. Using this method, container terminal yard equipment operate without overlapping arises with uninterrupted data presented for ways to efficiently. I would suggest both the existing wireless AP LAN configuration of container terminal and new LTE system and applied to the real yard operating devices situations. Through these methods presented comparative the existing network traffic with new constructed LTE configuration. I admired to suggest that wireless network LTE introduction is fundamental factors to get rid of the blind spot, the problem of limited frequency channel and overlapping arises. These essential points can be a continual improving terminal services and more efficient terminal operational management.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.398-401
• /
• 2007

The performance characteristics of Polyethylene-Nitrous oxide (PE-N2O) hybrid rocket motor with the variation of the grain geometry was investigated. To compare the performance parameters under the different port number, single and four port grains were used in this study. In order to improve the performance by enhancing mixing between fuel and oxidizer, the fuel grain having the mixing chamber was additionally studied. From the motor firing tests, it is found that the motor having 4-port fuel grain with the mixing chamber showed the highest performance among all cases. Therefore we have confirmed that with only the geometrical change of the fuel grain, it was possible to give quite influential improvement on the motor performance