• Journal of Mechanical Science and Technology
• /
• 제20권10호
• /
• pp.1626-1637
• /
• 2006

The pressure pulsation due to the gear geometry of the gerotor (generalized rotor) pump mainly occurs in an instant that the chamber of the gerotor enters the delivery port and leaves the suction one. Such a pressure pulsation may result in undesirable vibration and noise of pump components as well as cavitation in hydraulic system. Therefore, it is very important to examine the pressure characteristic of the gerotor pump at its design and analysis stages. In this paper, in order to reduce the pressure pulsation in the gerotor pump, the port plate with the relief grooves is designed by referring to as notch of vane pump and relief groove of piston pump. A series of the theoretical analyses on the pressure pulsation is performed in consideration of various design parameters of the port plate, including the installation positions of the port inlet/outlet and the groove width, and the operating conditions such as rotational velocity and delivery pressure.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 한국항해항만학회 1998년도 추계학술대회논문집:21세기에 대비한 지능형 통합항만관리
• /
• pp.263-269
• /
• 1998

The forecasting of container cargo volumes should be estimated correctly because it has a key roles on the establishment of port development planning, and the decision of port operating system. Container cargo volumes have a dynamic characteristics which was changed by effect of competitive ports. Accordingly forecasting was needed overall approach about competitive port's development, alternation and information. But, until now, traffic forecasting was not executed according to competitive situation, and that was accomplished at the point of unit port. Generally, considering the competition situation, simulation method was desirable at forecasting because system's scale was increased, and the influence power was intensified. In this paper, considering this situation, the objectives can be outlined as follows. 1) Structural model constructs by System dynamics method. 2) Structural simulation model develops according to modelling of competitive situation by expended SD method which included HEP(Hierarchical Fuzzy Process) And actually, effectiveness was verified according to proposed model to major port in northeast asia.

• Journal of KIBIM
• /
• 제10권1호
• /
• pp.9-22
• /
• 2020

Recently, BIM has been extended to infrastructures such as roads and bridges, and the demand for BIM standard development for ports is increasing internationally. Due to the low level of utilization of classification system and drawing standards compared to other infrastructures, and the closed nature of national security facilities, ports have insufficient level of connection and sharing environment among external systems or users. In addition, since the standardization of data for port facilities is not made, it is still necessary to establish an independent DB for each system and to ensure interoperability of data between these systems since it does not have a shared environment among similar data. Therefore, the purpose of this study is to develop and verify IFC, the international standard for BIM, in order to cope with the BIM environment and to be commonly used in the design, construction, and maintenance of port facilities. To this end, we build a standard schema with port-specific Express Notation according to buildingSMART International's standard development methodology. First, domestic and international reference model standards were analyzed to derive components such as space and facilities of port facilities. Based on this, the components of the port facility were derived through the codification, categorization, and normalization process developed by the research team. This was extended based on the port BIM object classification system developed by the research team. Normalization results were verified by designers and associations. Then, IFC schema construction was based on Express-G data modeling based on IFC 4 * 2 Candidate, which is a bridge candidate standard based on IFC4 (ISO16739), and IFC 4 * 3 Draft, which is developed by buildingSMART International. The final schema was validated using the commercialized validation tool. In addition, in order to verify the structural verification of the port IFC schema, the transformation process was verified by converting the caisson model into a Part21 file. In the future, this result will not only be used as a delivery standard for port BIM products, but will also be applied as a linkage standard between systems and a common data format for port BIM platforms when BIM is used in the maintenance phase. In particular, it is expected to be used as a core standard for data exchange in the port maintenance stage.

• Proceedings of the IEEK Conference
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.809-812
• /
• 2005

In this work, a new method for extracting substrate parameters of RF MOSFETs based on 3-port measurement is presented using device simulation. A T-type substrate resistance network is used. 3-port Y-parameter analyses were performed on the equivalent circuit of RF MOSFETs. All the components in the RF MOSFETs when the device is turned off were extracted directly from the 3-port device simulation data. The small-signal output admittance $Y_{22}$ can be well modeled up to 40 GHz. From the 3-port simulation and modeling results, it was verified that the proposed equivalent circuit and parameter extraction method was more accurate than the single substrate resistance model.

• Korean System Dynamics Review
• /
• 제2권1호
• /
• pp.29-50
• /
• 2001

A System such as a port and regional economy has a large boundary and complexity. So, not only the system's state is considered as a black box but system's forecast accuracy is very low. Futhermore various components in a port and regional economy influence significantly on each other. To copy with these problem the form of structure models were introduced by suing SD model. This study has the issue of simplifying the regional economic effects of the port as contributng to raising the regional income. The regional economic effects of port have various indirect ones except for this. So, SD(System Dynamics) was presented, and applied to simulate port and regional economy.

• Journal of Navigation and Port Research
• /
• 제33권9호
• /
• pp.653-657
• /
• 2009

The aim of this study draws out the Green Index of a Seaport (GIS) that is comprehensive and coordinated approach to diminish the negative impacts of port operations using a Factor Analysis (FA) which can evaluate the level of cleanness of seaport. For this purpose, the questionnaires were sent to the experts and port stake holders, and received 75 out of 100. In this survey, Cronbach's alpha has the numerical value 0.76. Thus it means that this survey has internal consistency reliability. Overall, 15 components were selected from the literature review and five factors were extracted by factor analysis.

• Journal of Power Electronics
• /
• 제19권5호
• /
• pp.1278-1288
• /
• 2019

A DC-DC Non-Isolated Three-Port Cuk-Cuk (NI-TPCC) converter for interfacing renewable energy sources (RESs) such as Fuel Cell (FC) and Photovoltaic (PV) energy with a DC load is presented in this paper. It features single-stage power conversion from both of the input ports to the load port. The proposed NI-TPCC converter is designed based on the classical Cuk converter. The operational modes and power flow are analyzed in the continuous conduction mode (CCM), and the relationships among the port voltages are derived. Continuous currents in all three ports with less ripple enhance the performance of a fuel cell and its operating life. Furthermore, the output inductor is shared with both of the input ports, which reduces the number of active and passive components. The effectiveness of the designed NI-TPCC converter has been validated through simulation and experimental results.

• Journal of Korea Port Economic Association
• /
• 제27권2호
• /
• pp.39-57
• /
• 2011

Recently Incheon Port and Pyeongtak·Dangjin Port called as Capital Region Ports have enjoyed ever-increasing cargo volumes. However, there is a lack of research on this region while plenty of outputs were suggested on mega hub and regional hub ports in terms of shipping companies and stakeholders' port choice criteria. To identify and evaluate the Capital Region Ports, this paper identifies the factors and sub-components influencing their port choice and presents a structure for evaluating them. Based on the literature related to port selection and competition, a regional survey employed Factor Analysis to reveal that 'port facility and link', 'cost and service', 'port hinterland' and 'information service and port operation policy' are the determining factors in these regions. From the overall evaluation using Fuzzy Theory, Port of Incheon Port obtained high score compare to that of Port of Pyeongtak Dangjin.

• Smart Structures and Systems
• /
• 제20권2호
• /
• pp.163-173
• /
• 2017

Structural health monitoring (SHM) of civil infrastructure using fiber Bragg grating sensor networks (FBGSNs) has received significant public attention in recent years. However, there is currently little research on the health-monitoring technology of high-piled wharfs in coastal ports using the fiber Bragg grating (FBG) sensor technique. The benefits of FBG sensors are their small size, light weight, lack of conductivity, resistance corrosion, multiplexing ability and immunity to electromagnetic interference. Based on the properties of high-piled wharfs in coastal ports and servicing seawater environment and the benefits of FBG sensors, the SHM system for a high-piled wharf in the Tianjin Port of China is devised and deployed partly using the FBG sensor technique. In addition, the health-monitoring parameters are proposed. The system can monitor the structural mechanical properties and durability, which provides a state-of-the-art mean to monitor the health conditions of the wharf and display the monitored data with the BIM technique. In total, 289 FBG stain sensors, 87 FBG temperature sensors, 20 FBG obliquity sensors, 16 FBG pressure sensors, 8 FBG acceleration sensors and 4 anode ladders are installed in the components of the back platform and front platform. After the installation of some components in the wharf construction site, the good signal that each sensor measures demonstrates the suitability of the sensor setup methods, and it is proper for the full-scale, continuous, autonomous SHM deployment for the high-piled wharf in the costal port. The South 27# Wharf SHM system constitutes the largest deployment of FBG sensors for wharf structures in costal ports to date. This deployment demonstrates the strong potential of FBGSNs to monitor the health of large-scale coastal wharf structures. This study can provide a reference to the long-term health-monitoring system deployment for high-piled wharf structures in coastal ports.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• 제51권6호
• /
• pp.255-261
• /
• 2002

Recently, traction motors in trains are supplied with single phase a.c. power. After this power is converted to d.c. power, it is inverted to three phase power to operate traction motors. As going through the process of the conversion, harmonic current is generated in train. The method of conventional analysis on harmonics, studied by RTRI, is modeled with equivalent circuit of ac AT-fed electric railroad system using by the distributed constant circuit. However, this circuit as two-port network model has some difference in comparison with real system. The reason why the conventional method is different from the real system is that the conventional method dose not include three conductor groups, that is catenary, rail, and feeder, and admittance between the conductors for line capacitance. Therefore, this method has a little error. This paper proposes new method to more effectively estimate Harmonic current. In this method, numerous components in electric railway are categorized and each component is defined as a four- port network model. The equivalent circuit for the entire power supply system is also described into a four-port network model with connections of these components. In order to evaluate the efficiency and the accuracy of a proposed method, it is compared with values measured in Kyung-Bu high speed line and ones calculated by the conventional method.