• 한국항해항만학회지
• /
• 제39권3호
• /
• pp.149-156
• /
• 2015

Dynamic Positioning System(DPS)은 동력, DP control 장치, DP 컴퓨터, 위치참조시스템(PRS), 센서, thruster 시스템 및 DP 운용자(DPO) 7가지로 구성되어 있다. DP 선박은 이들 구성요소들에 문제가 발생하면 그 기능을 상실할 수 있는데 이러한 DP 선박의 위치손실사고(Loss of Position, LOP)는 선주가 자발적으로 매년 IMCA에 보고하고 있다. 본 연구에서는 2001~2010년까지 10년 동안 IMCA 보고된 DP 선박 관련사고 612건에 대한 분석을 바탕으로 DPS의 7가지 구성요소와 관련된 사고 원인을 파악하고 이들 중 높은 비율을 차지하는 요인의 정성적, 정량적 분석을 통한 DP 선박의 안전운항 방안을 모색하고자 한다. 10년 평균 가장 높은 비율을 차지한 DPS 사고원인 요소는 PRS였다. 이를 전문가들의 브레인스토밍을 통해 작성된 flowchart를 바탕으로 베이지안 네트워크 분석을 시행한 결과 PRS 각 요소별 조건부 확률을 확인할 수 있었다. DP 선박의 drive off를 발생시키는데 주요한 영향을 미치는 것은 DGPS, microwave radar 및 HPR 이었고 DGPS에 주요한 영향을 미치는 에러 요인은 signal blocked, electric components failure, relative mode error 및 signal weak or fail이라는 것도 확인할 수 있었다.

• Korean Chemical Engineering Research
• /
• 제46권4호
• /
• pp.732-738
• /
• 2008

SMB 공정은 석유화학, 정밀화학, 제약 제품들을 연속대량으로 정제할 수 있는 크로마토그래피 기술로서 관련 산업에서 많은 관심을 얻고 있다. 최근 생명공학 기술의 발달과 함께, 다양한 생물 유래의 유용물질에 대한 SMB 공정의 적용이 시도되어 보고되고 있다. 또한, 다양한 방법으로 SMB 공정의 분리 메커니즘을 이해하는 연구들이 보고 되었다. 이와 같은 연구에서는 목적산물을 생산하는 일련의 생산과정에서 SMB 공정의 조업을 보다 용이하게 하고, SMB 공정에서 발생할 수 있는 문제의 원인을 분석하고 있다. 이번 연구에서는 정상상태에 이른 SMB 공정에서 기주입된 시료(psicose (A) 및 fructose (B) 혼합물)와 새로이 주입되는 시료(psicose (C) 및 fructose (D) 혼합물)의 체류 특성을 알아보는 모사실험을 수행하였다. 새로운 원료의 주입시점이 하나의 교환시간 중 앞부분일수록 기주입된 물질은 보다 빠르게 SMB 공정에서 유출되는 것을 확인할 수 있었다. 마찬가지로, 새로이 주입되는 물질들도 이와 마찬가지로 교환시간의 전반부에 주입될수록 보다 빨리 정상상태에 도달하는 것을 확인하였다.

• Korean Chemical Engineering Research
• /
• 제43권3호
• /
• pp.360-365
• /
• 2005

SMB는 연속 크로마토그래피 공정으로써 회분식 크로마토그래피보다 이동상의 소비를 줄이고 높은 농도, 높은 수율의 생산성의 장점을 가지고 있다. 그러나 운전상의 복잡성 때문에 이 공정을 이해하기 어렵다. 본 실험에서는 서로 다른 색깔을 지닌 두 물질의 분리를 시도함으로써 공정의 이해를 용이하게 하였다. 실험에서 사용된 물질은 Blue dextran과 Orange G로서 각각 파란색과 오렌지 색을 띤다. 실험은 4개의 존으로 구성된 SMB로써 zone VI에서 zone I으로 재순환 되지 않는 열린 루프계가 적용되었다. 운전 조건은 Standing wave design를 이용하였으며 extract와 raffinate에서 높은 순도와 수율을 가질 수 있도록 디자인하였다. 단일 칼럼을 이용한 실험을 통해서 여러 유량에서 비선형 흡착 평형식과 실험식으로부터 물질전달계수를 얻었다. Extract와 raffinate의 농도분포 곡선은 모사 결과와 거의 일치하였다. Extract와 raffinate의 순도는 99.49％와 98.89％이며 두 물질의 수율은 모두 98％였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1730-1733
• /
• 2004

Device miniaturization and high integrated circuit design is of major interest for the development of electronic devices. Various studies have been conducted to develop new material and processing technique[1]. Negative Differential Resistance(NDR) is the defining behavior in several electronic components, including the Esaki diode and most notably, resonant tunneling diodes(RTD)[2]. We made a comparison of electrical properties between 4,4-Di(ethynylphenyl)-2'-nitro-1-(thioacetyl)benzene and 4-[2,5-dimethoxy-4-(p henylethynyl)phenyl]ethynylphenylethanethioate, which have been well known as a conducting molecule having possible application to molecular level NDR devices. As a result, we measured current-voltage curves using Scanning Tunneling microscopy(STM), I-V curves also showed several current peaks between negative and positive bias region.

• Journal of Welding and Joining
• /
• 제30권1호
• /
• pp.51-58
• /
• 2012

To assess hydraulic connections between sub-components of the International Thermonuclear Experimental Reactor (ITER) diagnostic port plug, the laser welding and ablation cutting process were investigated in order to be applied the remote handling maintenance. In this study, laser ablation cutting, which vaporizes a small amount of solid material directly into gas by focusing a laser beam of high density energy, is adopted in order to overcome the limitation of the normal laser cutting technology that the head should be placed as close to the work piece as possible to blow out melt metal at a distance. Complete cutting of a work piece is obtained by repetitive multi-passes of the laser beam. The welding and cutting process were tested on the sample work pieces and finally on a prototype of a hydraulic connection module for remote handling. The results showed that this process can be a promising candidate for hydraulic connections by remote handling.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.185-185
• /
• 2009

Micropump is very useful component in micro/nano fluidics and bioMEMS applications. Using the flexural vibration mode of PZT bar, a piezopump is successfully made. The PZT bar is polarized with thickness direction. The proposed structure for the piezo-pump consists of an input and an output port, piezoelectric ceramic actuator, actuator support, diaphragm. The traveling flexural wave along the bar is obtained by dividing two standing waves which are temporally and spatially phase shifted by 90 degrees from each other. Fluid is drawn into a forming chamber, eventually the forming chamber closes trapping the fluid therein. The finite elements analysis on the proposed pump model is carried out to verify its operation principle and design by the commercial FEM software. Components of piezopump were made, assembled, and tested to validate the concepts of the proposed pump and confirm the simulation results. The performance of the proposed piezopump the highest pressure level of 83.4kHz.

• 한국정보시스템학회지:정보시스템연구
• /
• 제19권4호
• /
• pp.51-63
• /
• 2010

U-City applies ubiquitous information technologies such as RFID, GPS, USN to various components of city functions and services. The concept of U-City was popularized especially in Korea and currently more than 40 projects have been carrying out all over country. U-City incorporates advanced information communication technologies into ubiquitous information services to provide better quality of life. The purpose of this study is to analyze preferences for the U-City services by surveying experts in U-City developing companies. This study employs Analytic Hierarchy Process which is very useful tool for performing multi-criteria decision making. Total of 28 responses were used in the analysis. The results indicated that the first 7 most preferred items were from transportation and safety area and environment and healthcare area and 4 out of 6 items in transportation and safety area were ranked among them. It implies that respondents consider countering anxiety caused by congested traffic, natural disasters, crimes, etc most important aspect that U-City should deal with. On the other hand, U-Port, U-Convention, U-Logistics, U-Public Administration and U-City Portal were listed as the least preferred services.

• 한국농촌건축학회논문집
• /
• 제14권4호
• /
• pp.37-45
• /
• 2012

The villages in island were established overcoming natural environment through Shamanism and changed by developing various industrials like transportation. Gapa Island located in southern part of Jejudo is flat topography different from the other islands. The purpose of this study is to clarify characteristics on transformation of community space in Gapa Island. For purpose, community spaces in Gapa Island are researched such as establishment, function, change, and use of community space. Spatial components in Gapa Island are like as spaces in faith, residential area, area for production, commercial zone, community space, education facilities, public offices, port, and roads. The methods of this study are literature research and interview survey for residents in Gapa Island. The results are as followings: First, community space is in charge about social, industrial, and religious function. Second, for traditional spaces separated for male and female, demarcation of space does not exist in industrial side but the demarcation has still been exist in religious side. Finally, by development of tourism new community space has been charge in festival function as well as function of space like agora for meeting with people freely, which is relatively various in function of community space in social side. Role of the dock for ship, main transportation of island, is being increasing as square.

• 한국항해학회지
• /
• 제24권5호
• /
• pp.405-415
• /
• 2000

DGPS/Radio beacons are currently being planned or installed in many countries. They offer a cost-effective way of distributing differential data to large number of users. These networks are also being deployed in South Korea, Japan, and China. Several DGPS stations among them are operating on the same frequencies. The DGPS signal based on a radio beacon in medium frequency band travels principally as a groundwave over the surface of the earth. The signal may also be received as skywaves at locations beyond about 100 km from the reference station. These skywaves interfere with groundwave signals due to fading. This factor has generally ignored in designing DGPS/Radio beacon systems. A further important factor is to reduce the coverage due to interference from other beacons on the same or adjacent frequencies. The desired signal may fade due to interaction between its skywave and groundwave components. It may degrade the accuracy of the positioning in a complex fashion. This paper estimates the coverage of Far East Asia DGPS stations which are operating on the same frequencies, which is based on the signal protection ratio and interference of the signal strength of the groundwave and skywave.

• 한국항해학회지
• /
• 제9권1호
• /
• pp.95-109
• /
• 1985

It has been generally known that the chattering of an AC electromagnetic contactor due to the fluctuation of attracting force is the primary cause of its abrasion and noise. To reduce this chattering effect, an AC electromagnetic contactor is mostly fitted with a shading coil which works the role to make difference in phases of two distinct components of attracting force. The theoretical interpretation of an AC electromagnetic contactor with shading coil and the equation of its attracting force per unit wattage consumed have already been proposed, however, few explications so far have been made on the determination of optimal circuit constants of shading coil. In this paper, the auther constructs a circuit model of an AC electromagnetic contactor with shading coil which is based on the theoretical interpretation of shading coil examined to be valid by experiments under some assumptions, and defines the equation of attracting force without chattering per unit wattage consumed as a performance function for determining the optimal circuit constants of shading coil. And then, the optimal circuit constants maximizing the performance function are determined by means of computer simulation founded on the above circuit model and the characteristics of those circuit constants are examined with special attention to the coupling coefficient.