• 분석과학
• /
• 제15권3호
• /
• pp.263-269
• /
• 2002

평균입경이 200 ${\mu}m$인 코디어라이트 분말로 다공성 필터를 제조한 후, 진공함침법으로 Pt, Pd, Cu, Co, La, $V_2O_5$ 촉매를 담지시켰다. VOC의 일종인 톨루엔을 촉매담지 세라믹필터에 통과시키며 촉매산화시킴으로서 톨루엔에 대한 촉매들의 활성에 대하여 고찰하였다. 제조된 다공성 필터의 겉보기 기공률은 62%였고, 압축강도는 약 10 MPa이었으며, 5 cm/sec 유속에서의 차압은 15 mmHg였다. 촉매를 필터에 담지시키면 기공률은 감소하고, 차압과 압축강도는 증가하였다. 필터에 담지된 촉매들 중에서 Pt 촉매의 활성이 가장 높았고, 250 $^{\circ}C$의 온도에서 90% 이상의 톨루엔을 제거시킬 수 있었다. 250 $^{\circ}C$ 이하의 온도에서는 Pt 촉매 담지량이 톨루엔의 전환율에 영향을 미쳤지만, 그 이상의 온도에서는 Pt 촉매 담지량의 차이에 의한 영향은 나타나지 않았다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.222-222
• /
• 2012

Metal oxide gas sensors based on semiconductor type have attracted a great deal of attention due to their low cost, flexible production and simple usability. However, most works have been focused on n-type oxides, while the characteristics of p-type oxide gas sensors have been barely studied. An investigation on p-type oxides is very important in that the use of them makes possible the novel sensors such as p-n diode and tandem devices. Monoclinic cupric oxide (CuO) is p-type semiconductor with narrow band gap (~1.2 eV). This is composed of abundant, nontoxic elements on earth, and thus low-cost, environment-friendly devices can be realized. However, gas sensing properties of neat CuO were rarely explored and the mechanism still remains unclear. In this work, the neat CuO layers with highly ordered mesoporous structures were prepared by a template-free, one-pot solution-based method using novel ink solutions, formulated with copper formate tetrahydrate, hexylamine and ethyl cellulose. The shear viscosity of the formulated solutions was 5.79 Pa s at a shear rate of 1 s-1. The solutions were coated on SiO2/Si substrates by spin-coating (ink) and calcined for 1 h at the temperature of $200{\sim}600^{\circ}C$ in air. The surface and cross-sectional morphologies of the formed CuO layers were observed by a focused ion beam scanning electron microscopy (FIB-SEM) and porosity was determined by image analysis using simple computer-programming. XRD analysis showed phase evolutions of the layers, depending on the calcination temperature, and thermal decompositions of the neat precursor and the formulated ink were investigated by TGA and DSC. As a result, the formation of the porous structures was attributed to the vaporization of ethyl cellulose contained in the solutions. Mesoporous CuO, formed with the ink solution, consisted of grains and pores with nano-meter size. All of them were strongly dependent on calcination temperature. Sensing properties toward H2 and C2H5OH gases were examined as a function of operating temperature. High and fast responses toward H2 and C2H5OH gases were discussed in terms of crystallinity, nonstoichiometry and morphological factors such as porosity, grain size and surface-to-volume ratio. To our knowledge, the responses toward H2 and C2H5OH gases of these CuO gas sensors are comparable to previously reported values.

• 보존과학회지
• /
• 제27권1호
• /
• pp.1-11
• /
• 2011

강화도 능내리에서 출토된 고려시대 은제유물을 대상으로 성분조성과 경도, 조직특성을 연구하고 출토된 은제유물과 비슷한 성분비로 시편을 제작하여 가공방법과 온도에 따라 변하는 미세조직의 변화를 관찰하였다. 그 결과 능내리 출토 은제유물의 소지는 Cu가 2~6% 함유된 Ag-Cu 합금으로, Cu는 적절한 경도유지 등 특정 목정을 위하여 인위적으로 합금한 것으로 판단되며, 금으로 이루어진 도금층에서는 Hg가 약 11%의 함량으로 검출되어 아말감법으로 도금한 것으로 판단된다. 또한 일부 은제유물의 표면에서 확인되는 다공질 층은 실험시편 제작을 통한 확인결과 $400^{\circ}C$이상의 열이 가해질 때 생성되는 것으로, 능내리출토 은제유물들은 $400^{\circ}C$이상의 온도에서 열간가공하거나 열처리를 실시한 것으로 추정된다. 한편, 고부조로 타출된 은제유물 1점은 다른 은제유물과 비슷한 성분조성에도 불구하고 매우 낮은 경도를 보였는데, 이는 타출기법과 관계가 있는 것으로 추정된다.

• 한국분말재료학회지
• /
• 제22권4호
• /
• pp.229-233
• /
• 2015

Porous metallic glass compact (PMGC) are developed by electro-discharge sintering (EDS) process of gas atomized $Zr_{41.2}Ti_{13.8}Cu_{12.5}Ni_{10}Be_{22.5}$ metallic glass powder under of 0.2 kJ generated by a $450{\mu}F$ capacitor being charged to 0.94 kV. Functional iron-oxides are formed and growth on the surface of PMGCs via hydrothermal synthesis. It is carried out at $150^{\circ}C$ for 48hr with distilled water of 100 mL containing Fe ions of 0.18 g/L. Consequently, two types of iron oxides with different morphology which are disc-shaped $Fe_2O_3$ and needle-shaped $Fe_3O_4$ are successfully formed on the surface of the PMGCs. This finding suggests that PMGC witih hydrothermal technique can be attractive for the practical technology as a new area of structural and functional materials. And they provide a promising road map for using the metallic glasses as a potential functional application.

• 한국재료학회지
• /
• 제23권7호
• /
• pp.366-372
• /
• 2013

Flexible polyurethane/clay porous nanocomposite foams were synthesized using natural and organically modified montmorillonite clays such as bentonite, closite 10A and closite 30B. The content of nanoclays was varied from 1 to 5 wt% of polyol. Dispersion of clay in Polyurethane(PU) matrix was investigated by X-ray diffraction(Cu-$K{\alpha}$ rays of wavelength $1.54{\AA}$) using an X-ray diffractometer. Also, we determined that the thermal resistance of PU foam increased with added clay, compared to that of pure PU foam. The cell size and the fraction of open cells of the precursor foam were controlled by the addition of clay to the polyurethane foam. Modified clays were found to be more efficient cell openers than the unmodified clay. In addition, the tensile strength and elongation of the polyurethane/clay porous nanocomposites were examined. Increasing clay content increased the mechanical properties of the composites, such as tensile strength, and elongation at break. However, increasing the content over 5 wt% deteriorated the properties of the composites. We found that the nanofillers(bentonite, closite 10A and closite 30B) improved the thermal stability of the nanocomposite foam. The nanocomposite foam containing 3 wt% of closite 30B exhibited the best tensile strength and thermal stability.

• 한국산업융합학회 논문집
• /
• 제4권1호
• /
• pp.61-69
• /
• 2001

Polycarbonate(PC) membranes for oxygen enrichment from air were prepared by the wet phase inversion method. In order to improve oxygen separation performances of the PC membrane, the effect of the added ethanol(nonsolvent) and $CuCl_2$(metal salt) concentration in the casting solution on morphology, oxygen permeability ami $O_2/N_2$ separation factor of the membrane was studied. In addition, tensile strength and elongation at break of the membrane were investigated. An asymmetric membrane with a dense top layer and a porous sublayer was obtained. The thickness of the dense top layer decreased with increasing amount of nonsolvent additive. Compared with pure PC membrane without additive(metal salt), the oxygen permeability and $O_2/N_2$ separation factor of the $PC/CuCl_2$ membrane are significantly improved. The oxygen permeability and $O_2/N_2$ separation factor is $5.25{\times}10^{-9}cm^3(STP){\cdot}cm/cm^2{\cdot}sec{\cdot}cmHg$ and 4.5, respectively. This improvement might be due to good interaction between metal salt and oxygen.

• Advanced Composite Materials
• /
• 제18권4호
• /
• pp.381-394
• /
• 2009

The kinetics of centrifugal infiltration of fibrous tubular preform is built theoretically, and simulations are conducted to study the effects of various casting conditions on infiltration kinetics and macrosegregation by combining with the energy, mass and kinetic equations. A similarity way is used to simplify the one-dimensional model and the parameter is ascertained by an iterative method. The results indicate that the increase of superheat, initial preform temperature, porosity tends to enlarge the remelting region and decrease copper solute concentration at the infiltration front. Higher angular velocity leads to smaller remelting region and solute concentration at the tip. The pressure in the infiltrated region increase significantly when the angular velocity is much higher, which requires a stronger preform. It is observed that the pressure distribution is mainly determined by the angular velocity, and the macrosegregation in the centrifugal casting is greatly dependent on the superheat of inlet metal matrix, initial temperature and porosity of the preform, and the angular velocity.

• 공업화학
• /
• 제5권6호
• /
• pp.1009-1015
• /
• 1994

분산중합으로 합성한 폴리스티렌 seed를 사용하여 seed 중합방법으로 단분산성인 다공성 스티렌-디비닐벤젠(St-DVB) 겔과 아크릴로니트릴-에틸렌 디메타크릴레이트(AN-EDMA) 겔을 제조하였다. 합성한 St-DVB 겔과 AN-EDMA 겔은 HPLC용 충진제로 적합한 좁은 입도분포와 다공성을 갖고 있으며, 이들 겔을 충진한 GPC 또는 HPLC용 column은 비교적 높은 효율을 나타내었다, 또한 AN-EDMA 겔을 아미드옥심화한 AAN-EDMA 겔에 대한 $Cu^{2+}$, $Cd^{2+}$ 및 ${UO_2}^{2+}$ 이온의 흡착특성을 시험하였다.

• 한국재료학회지
• /
• 제17권2호
• /
• pp.81-85
• /
• 2007

Embedded capacitor technology can improve electrical perfomance and reduce assembly cost compared with traditional discrete capacitor technology. To improve the capacitance density of the $Al_2O_3$ based embedded capacitor on Cu cladded fiber reinforced plastics (FR-4), the specific surface area of the $Al_2O_3$ thin films was enlarged and their surface morphologies were controlled by anodization process parameters. From I-V characteristics, it was found that breakdown voltage and leakage current were 23 V and $1{\times}10^{-6}A/cm^2$ at 3.3 V, respectively. We have also measured C-V characteristics of $Pt/Al_2O_3/Al/Ti$ structure on CU/FR4. The capacitance density was $300nF/cm^2$ and the dielectric loss was 0.04. This nano-porous $Al_2O_3$ is a good material candidate for the embedded capacitor application for electronic products.

• 한국재료학회지
• /
• 제12권1호
• /
• pp.89-93
• /
• 2002

To investigate the effect of properties of pores in anodic alumina template(AAT) on the formation and characteristics of metal nano wires, Cu and Ni nano wires were manufactured using anodic alumina template formed in various electrolytes. The characteristics of prepared metal nano wires using AAT could be replicated from those of pores in AAT. The diameters of nano wires could be controlled by the widening process of anodic porous film in $H_3PO_4$ solution. The shape ratio of the nano wire was shown to be $170{\pm}30$ for Ni nano wire formed by AAT made in sulfuric acid.