• 한국재료학회지
• /
• 제25권4호
• /
• pp.165-170
• /
• 2015

Ceramics biomaterials are useful as implant materials in orthopedic surgery. In this study, porous HA(hydroxyapatite)/${\beta}$-TCP(tricalcium phosphate) composite biomaterials were successfully fabricated using HA/${\beta}$-TCP powders with 10-30 wt% $NH_4HCO_3$ as a space holder(SH) and $TiH_2$ as a foaming agent, and MgO powder as a binder. The HA/${\beta}$-TCP powders were consolidated by spark plasma sintering(SPS) process at $1000^{\circ}C$ under 20 MPa conditions. The effect of SH content on the pore size and distribution of the HA/${\beta}$-TCP composite was observed by scanning electron microscopy(SEM) and a microfocus X-ray computer tomography system(SMX-225CT). These microstructure observations revealed that the volume fraction of the pores increased with increasing SH content. The pore size of the HA/${\beta}$-TCP composites is about $400-500{\mu}m$. The relative density of the porous HA/${\beta}$-TCP composite increased with decreasing SH content. The porous HA/${\beta}$-TCP composite fabricated with 30%SH exhibited an elastic modulus similar to that of cortical bone; however, the compression strength of this composite is higher than that of cortical bone.

• 조명전기설비학회논문지
• /
• 제25권2호
• /
• pp.126-130
• /
• 2011

Transparent conductive oxide (TCO) is an important part in the construction of dye-sensitized solar cells (DSCs) because of its low sheet resistance, sufficient light transparent ability and high photoelectrical response as a porous photo-electrode material of DSCs. However, the use of TCO for the two DSC electrodes can result in significant cost increase for the less effective DSCs compared to Si based solar cell. Therefore, the replacement of TCO is required for the commercial production of DSCs. In this study, TCO electrodes are replaced by stainless steel mesh. The 3.44[%] efficiency of the prepared TCO-less DSCs sample was obtained.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.306-306
• /
• 2007

The surface was transformed to porous titanium oxide by the anodization of pure titanium. Titanium was anodized in non-aqueous and aqueous electrolytes at different potentials between 5 V and 150 V. Various electrolytes were compose of ethylene glycerol, $H_2SO_4,\;NH_4F\;and\;H_2O$. We obtained titania nanotube arrays on the micro pore of titanium. Micro pores and nano tubes were obtained by anodization at high potentials and low potentials, respectively. Morphologies of nanotubes and micro pore were characterized by FE-SEM. The unique surface structure is very attractive to electrical and medical applications such as gas sensor, biosensor, dental implant and stent.

• Current Photovoltaic Research
• /
• 제3권3호
• /
• pp.91-96
• /
• 2015

Optical modeling and characterization of transparent dye-sensitized solar cells (DSC) are presented to design and estimate DSC devices numerically. In order to model the inhomogeneous active layer of DSC, the porous structure of titanium oxide ($TiO_2$) and dye mixture, we prepared films consisting of layer by layer of the DSC's basic materials sequentially, and characterized the optical parameters of the films with the effective refractive index, which was extracted from the transmittance and reflectance measurements in ultra violet to near infra-red range. By using the effective refractive index, we made the optical model for DSC, and demonstrated that the optical model based on effective refractive index can be used to design and evaluate the performance of transparent-type DSC modules.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2004년도 Proceedings of the second conference of aseanian membrane society
• /
• pp.39-42
• /
• 2004

Ceramic membranes have attracted a great attention because they have excellent resistance to most organic solvents and can be used over a wide temperature range. Especially, titania (titanium oxide, TiO$_2$) shows excellent chemical resistance and can be used both acidic and alkali solutions, and therefore, titania is one of the most promising materials for the preparation of porous membranes; titania membranes having pore sizes in the range of nanofiltration (NF) to ultrafiltration (UF) membrane have been prepared by the sol-gel process (Tsuru 2001).(omitted)

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.24.1-24.1
• /
• 2010

In practical operation, the exposed surfaces may get dirty thus degrade the performance of devices. So the combination of self cleaning and antireflection is very desirable for use in outdoor photovoltaic and displaying devices, self cleaning windows and car windshields. For the purpose of self cleaning, the surface needs to be either superhydrophobic or superhydrophilic. However, in practice AR in the visible region and self cleaning are a pair of competitive properties. To satisfy the requirements for superhydrophobic or superhydrophilic surfaces, high surface roughness is required. But it usually cause severely light scattering. Photo-responsive coatings (TiO2, ZnO etc.) can lead to superhydrophilic. However, the refractive indices are high. Thus for porous structure, controlling pore size in the underwavelength scale to reduce the light scattering is very crucial for highly transparent and self cleaning antireflection coating. Herein, we demonstrate a simple method to make high performance broadband antireflection layer on the glass surface, by "carving" the surface by hot alkali solution. Etched glass has superhydrophilic surface. By chemical modification, it turns to superhydrophobic. Enhanced transparency (up to 97%) in a broad wavelength range was obtained by short time etching. Also antifogging effect has been demonstrated, which may offer advantage for devices working at high humidity environment or underwater. Compositional dependence of the properties was observed by comparing three different commercially available glasses.

• 한국재료학회지
• /
• 제14권2호
• /
• pp.133-140
• /
• 2004

We carried out anodic aluminum oxide (AAO) on a Si and a sapphire substrate. For anodic oxidation of Al two types of specimens prepared were Al(0.5 $\mu\textrm{m}$)!Si and Al(0.5 $\mu\textrm{m}$)/Ti(0.1 $\mu\textrm{m}$)$SiO_2$(0.1 $\mu\textrm{m}$)/GaN(2 $\mu\textrm{m}$)/Sapphire. Surface morphology of Al film was analyzed depending on the deposition methods such as sputtering, thermal evaporation, and electron beam evaporation. Without conventional electron lithography, we obtained ordered nano-pattern of porous alumina by in- situ process. Electropolishing of Al layer was carried out to improve the surface morphology and evaluated. Two step anodizing was adopted for ordered regular array of AAO formation. The applied electric voltage was 40 V and oxalic acid was used as an electrolyte. The reference electrode was graphite. Through the optimization of process parameters such as electrolyte concentration, temperature, and process time, a regular array of AAO was formed on Si and sapphire substrate. In case of Si substrate the diameter of pore and distance between pores was 50 and 100 nm, respectively. In case of sapphire substrate, the diameter of pore and distance between pores was 40 and 80 nm, respectively

• Korean Chemical Engineering Research
• /
• 제59권4호
• /
• pp.574-583
• /
• 2021

광촉매 재생을 통하여 교대로 운전되는, TiO₂-anatase 광촉매를 담지한 다공성 SiO₂ 담체를 충전한 두 개의 환형 UV/광촉매 반응기(유효 부피: 1.5 L) 중에서, 광촉매 활성이 재생된 하나는 32 일/회 동안 운전시키고 광촉매가 비활성화된 다른 하나는 15 W UV-A 광원을 켠 상태에서 100 ℃의 고온 공기에 의하여 광촉매를 재생시키면서, 에탄올(100 ppmv)과 황화수소(10 ppmv)를 동시 함유하는 3 L/min 유량의 폐가스를 교대로 처리하는 광촉매반응기 시스템의 지속적 운전을 수행하였다. 교대로 운전되는 광촉매반응기 시스템(A)의 에탄올 제거 거동으로서, 광촉매 반응기 시스템의 첫 번째, 두 번째 및 세 번째 운전의 정상 상태에서의 에탄올 제거효율 값은 각각 약 60, 55 및 54%를 유지하였다. 한편 광촉매반응기 시스템(A)의 황화수소의 제거효율 거동은, 각 운전 횟수에서 에탄올 제거효율의 거동과 다르게, 시간이 지남에 따라서 황화수소 제거효율의 감소 및 더 낮은 정상상태 도달의 반복적인 추세를 보였다. 그럼에도 불구하고 황화수소 제거에 있어서 각 운전 기간이 경과한 후에 황화수소 제거효율 값은 첫 번째, 두 번째 및 세 번째 운전 후에 각각 약 80, 75 및 73%를 유지하여서 에탄올 제거효율 값인 약 60, 55 및 54%보다 각각 약 20, 20 및 19%만큼 높았다. 따라서 다공성 SiO₂ 광촉매 담체의 흡착을 가역적 비활성화로 간주하고 흡착을 포함한 광촉매의 가역적 비활성화에 의한 제거효율 감소분이 재생 후 사용 횟수에 무관하게 일정하다고 가정할 때에, 사용 횟수가 세 번째에서 광촉매의 비가역적 비활성화에 따른 에탄올 및 황화수소 제거효율 감소분의, 직전 사용 횟수보다 증가 폭은 각각 약 1 및 2%로써 사용 횟수가 두 번째인 경우의 각각 약 5 및 5%보다 미미하거나 더 적어졌다. 한편 교대로 운전되는 다른 환형 광촉매반응기 시스템에서도 환형 광촉매반응기 시스템의 추세와 거의 동일하게 관찰되었다.

• Bulletin of the Korean Chemical Society
• /
• 제35권6호
• /
• pp.1784-1788
• /
• 2014

The present study suggests a novel method to produce raspberry-like microparticles containing diverse functional materials inside. The raspberry-like microparticles were produced from a random assembly of uniformly-sized poly(methyl methacrylate) (PMMA) nanoparticles via electrospraying. The solution containing the PMMA nanoparticles were supplied through the inner nozzle and compressed air was emitted through the outer nozzle. The air supply helped fast evaporation of acetone, so it enabled copious amount of microparticles as dry powder. The microparticles were highly porous both on the surface and interiors, hence various materials with a function of UV-blocking ($TiO_2$ nanoparticles and methoxyphenyl triazine) or anti-aging (ethyl(4-(2,3-dihydro-1H-indene-5-carboxyamido) benzoate)) were loaded in large amount (17 wt % versus PMMA). The surface and interior structures of the microparticles were dependent on the characteristics of functional materials. The results clearly suggest that the process to prepare the raspberry-like microparticles can be an excellent approach to generate functional microstructures.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.977-980
• /
• 2004

본 논문에서는 저가 고효율 태양전지를 제작하기 위하여 p형 다결정 실리콘 기판을 사용하여 수산화 칼륨(KOH)이 포함된 용액에 Saw damage 과정 후 불산이 함유된 용액에 전기화학적 양극산화 과정으로 실리콘 웨이퍼 표면에 요철을 형성하여 다공성 실리콘을 형성 하였다. 본 논문은 전기화학적 에칭방법으로 기존의 진공장비로 제작된 반사방지막의 반사율만큼 감소된 다공성 실리콘 반사방지막을 형성하였다. 전자빔 증착기(e-beam evaporator)로 단층으로 형성된 $TiO_2$의 반사방지막은 400-1000 nm의 파장 범위에서 4.1 %의 평균 반사율을 가졌으며, 양극산화과정으로 형성된 다공성 실리콘은 400-1000 nm의 파장의 범위에서 4.4 %의 평균 반사율을 가졌다. 본 연구는 태양전지의 반사방지막 형성을 기존의 제작 방법보다 간단하고 저렴한 방법으로 접근하여 태양전지의 변환효율을 상승하는데 목적을 두었다.