• Geomechanics and Engineering
• /
• v.20 no.5
• /
• pp.411-420
• /
• 2020

Numbers fitting-curve equations have been proposed to predict soil-water retention curve (SWRC) whose parameters have no definitude physical meaning. And these methods with precondition of measuring SWRC data is time-consuming. A simplified directly method to estimate SWRC without parameters obtained by fitting-curve is proposed. Firstly, the total SWRC can be discretized into linear segments respectively. Every segment can be represented by linear formulation and every turning point can be determined by the pore-size distribution (PSD) of Mercury Intrusion Porosimetry (MIP) tests. The pore diameters governing the air-entry condition (AEC) and residual condition (RC) can be determined by the PSDs of MIP test. The PSD changes significantly during drying in SWR test, so the determination of AEC and RC should use the PSD under corresponding suction conditions. Every parameter in proposed equations can be determined directly by PSD without curve-fitting procedure and has definitude physical meaning. The proposed equations give a good estimation of both unimodal and bimodal SWRCs.

• Journal of the Korean Ceramic Society
• /
• v.32 no.4
• /
• pp.462-470
• /
• 1995

The characteristics of spray-dried granules are important for dry pressing operation since they have great influences on die-filling, compaction ratio, and resulting green microstructure. An attempt was made to control granule morphology and the packing structure of fine Si3N4 particles in granules by adjusting suspension property. Mercury porosimetry was used to characterize the pore structures of both granules and green compacts. Finally, the effects of particle packing structure in granules and green microstructure on sintering behavior were investigated.

• Corrosion Science and Technology
• /
• v.8 no.2
• /
• pp.74-80
• /
• 2009

The high alkaline property in the concrete pore solution protects the embedded steel in concrete from corrosion due to aggressive ions attack. However, a continuous supply of those ions, in particular, chlorides altogether with a pH fall in electrochemical reaction on the steel surface eventually depassivate the steel to corrode. To mitigate chloride-induced corrosion in concrete structures, finely grained mineral admixtures, for example, pulverized fuel ash (PFA), ground granulated blast furnace slag (GGBS) and silica fume (SF) have been often advised to replace ordinary Portland cement (OPC) partially as binder. A consistent assessment of those partial replacements has been rarely performed with respect to the resistance of each binder to corrosion, although the studies for each binder were extensively looked into in a way of measuring the corrosion rate, influence of microstructure or chemistry of chlorides ions with cement hydrations. The paper studies the behavior of steel corrosion, chloride transport, pore structure and buffering capacity of those cementitious binders. The corrosion rate of steel in mortars of OPC, 30% PFA, 60% GGBS and 10% SF respectively, with chloride in cast ranging from 0.0 to 3.0% by weight of binder was measured at 7, 28 and 150 days to determine the chloride threshold level and the rate of corrosion propagation, using the anodic polarization technique. Mercury intrusion porosimetry was also applied to cement pastes of each binder at 7 and 28 days to ensure the development of pore structure. Finally, the release rate of bound chlorides (i.e. buffering capacity) was measured at 150 days. The chloride threshold level was determined assuming that the corrosion rate is beyond 1-2 mA/$m^3$ at corrosion and the order of the level was OPC > 10% SF > 60% GGBS > 30% PFA. Mercury intrusion porosimetry showed that 10% SF paste produced the most dense pore structure, followed by 60% GGBS, 30% PFA and OPC pastes, respectively. It was found that OPC itself is beneficial in resisting to corrosion initiation, but use of pozzolanic materials as binders shows more resistance to chloride transport into concrete, thus delay the onset of corrosion.

• Journal of Energy Engineering
• /
• v.7 no.1
• /
• pp.73-80
• /
• 1998

Zinc titanate sorbents were prepared and regeneration of used sorbents for high temperature desulfurization of fuel gases was studied. Zn/Ti molar ratio of prepared sorbents was 1.5 and quartz fixed-bed reactors with 1 cm and 3 cm diameters were used. Regeneration of zinc titanate sorbents at high temperature is exothermic reaction; that brings about deterioration of sorbents. Therefore, we experimented regeneration reaction of zinc titanate sorbents for the purpose of obtaining the most suitable regeneration conditions by changing experimental parameters such as reaction temperature, oxygen concentration, flow rate and steam content. $H_2S$ and $SO_2$ breakthrough curves were obtained during desulfurization-regeneration. Also, properties of the sorbents before and after regeneration were analyzed using SEM, XRD, Hg-porosimetry and BET method. From such results, we obtained the most suitable regeneration conditions including regeneration temperature of 650$^{\circ}$C, $O_2$ content of 5% and steam content of 10% in the gas stream.

• International Journal of Concrete Structures and Materials
• /
• v.8 no.2
• /
• pp.173-182
• /
• 2014

An experimental investigation was carried out to evaluate the mechanical properties of concrete mixtures in which coarse aggregate was partially (30, 50 or 70 %) replaced with pre-washed municipal solid waste incineration (MSWI) bottom ash. Results indicated that bottom ash reduced the compressive strength, elastic modulus, and levels of heavy metals in leachate when used as a replacement for gravel, and that the maximum amount of MSWI bottom ash in concrete should not exceed 50 %. To analyze the effect mechanism of bottom ash in concrete, the degree of hydration and the following pozzolanic reaction characterized by the pozzolanic activity index, and the porosity distribution in cement mortar. The study indicates that improved properties of concrete are not solely later strength gain and reduced levels of heavy metals in leachate but also the progression of pozzolanic reactions, where a dense structure contains a higher proportion of fine pores that are related to durability.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.10a
• /
• pp.365-368
• /
• 2002

This paper considers transference number in calculating diffusion coefficient of chloride ions of concrete and mercury intrusion porosimetry to investigate the volume and distribution of pore size, respectively, analyzing and discussing the property of resistance to chloride ion of concrete with granulated blast furnace slag. The experimental results show that the diffusion coefficient of chloride ion decreases with the rise of quantity of granulated blast furnace slag and pore structure of concrete with granulated blast furnace slag is different from that of OPC concrete. And from the results of regression analysis, the result showed that the diffusion coefficient of chloride ions is affected by capillary pore above 50nm.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.3
• /
• pp.399-402
• /
• 2006

Porous organic-inorganic hybrids have been prepared from tetraethylorthosilicate (TEOS) and organosilane precursors by sol-gel method. Two organosilanes, 3-(2,4-dinitrophenylamino)propyltriethoxysilane (DNPTES) and N-[[(2-nitrophenyl)methoxy]carbonyl]-3-triethoxysilylpropylamine (NPTES) were used to incorporate electron-accepting (di)nitrophenyl groups into the hybrids. The hybrids were characterized by FT-IR spectroscopy and elemental analysis, and their pore characteristics were studied by nitrogen sorption porosimetry. Surface area of the hybrids ranged from 563 to 770 $m^2$/g, pore volume, 0.23-0.30 $cm^3$/g, and porosity, 35-41%. It was demonstrated by UV-vis spectroscopy that aniline, ethylenediamine, and 1-aminonaphthalene could be removed from their hexane solutions in the presence of the hybrid powders. The removal of amines is attributable to donor-acceptor interaction between the electron-donating amines and electron-accepting (di)nitrophenyl moiety.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.10a
• /
• pp.159-162
• /
• 1999

The paper presents results of an investigation on the permeability characteristics and pore structure of concrete containing different levels of fly ash, silica fume, or blast furnace slag. The total cementitious content was 351kg/㎥, and the water/cementitious materials ratio was 0.55. The porosity and pore structure of representative pastes of the matrix were measured using mercury intrusion porosimetry, and the permeability characteristics of concrete were also determined by water and oxygen permeability, chloride ion penetration. The results show that significant reduction in permeability of concrete containing pozzolanic materials due to formation of a discontinuous macro-pore system which inhibits flow. And, the permeability of concrete and pore structure(capillary porosity or total porosity) shows linear relationship.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10a
• /
• pp.100-100
• /
• 2003

An image processing algorithm has been developed in order to analyze the nanofiber web images obtained from a high magnification microscope. It has been known that precise pore detection on thick webs is extremely difficult mainly due to lack of light uniformity, difficulty of fine focusing and translucency of nanofiber web. The pore detection algorithm developed has been found to show excellent performance in characterizing the porous structure, thus being a promising tool for on-line quality control system under mass production. Since the images obtained from an optical microscope represent only web surface, a scale factor has been introduced to estimate the web structure as a whole. Resulting web structures have been compared to those by mercury porosimetry, especially in pore size distribution. It has been shown that those two structures have a strong correlation, indicating that scaling of a single layer web structure can be an effective way of estimating the structure of thick fiber webs.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2005.12a
• /
• pp.66-71
• /
• 2005

The waste seashells were used for the removal of hydrogen sulfide from a hot gas stream. The sulphidation of waste seashells with $H_2S$ was studied in a thermogravimetric analyzer at temperature between 600 and 800$^{\circ}C$. The desulfurization performance of the waste seashell sorbents was experimentally tested in a fixed bed reactor system. Sulfidation experiments performed under reaction conditions similar to those at the exit of a coal gasifier showed that preparation procedure and technique, the type and the amount of seashell, and the size of the seashell affect the $H_2S$ removal capacity of the sorbents. The pore structure of fresh and sulfided seashell sorbents was analyzed using mercury porosimetry, nitrogen adsorption, and scanning electron microscopy.