• Coupled systems mechanics
• /
• 제9권2호
• /
• pp.125-145
• /
• 2020

In this paper, we present a 3D thermo-hydro-mechanical coupled discrete beam lattice model of structure built of the nonisothermal saturated poro-plastic medium subjected to mechanical loads and nonstationary heat transfer conditions. The proposed model is based on Voronoi cell representation of the domain with cohesive links represented as inelastic Timoshenko beam finite elements enhanced with additional kinematics in terms of embedded strong discontinuities in axial and both transverse directions. The enhanced Timoshenko beam finite element is capable of modeling crack formation in mode I, mode II and mode III. Mode I relates to crack opening, mode II relates to in-plane crack sliding, and mode III relates to the out-of-plane shear sliding. The pore fluid flow and heat flow in the proposed model are governed by Darcy's law and Fourier's law for heat conduction, respectively. The pore pressure field and temperature field are approximated with linear tetrahedral finite elements. By exploiting nodal point quadrature rule for numerical integration on tetrahedral finite elements and duality property between Voronoi diagram and Delaunay tetrahedralization, the numerical implementation of the coupling results with additional pore pressure and temperature degrees of freedom placed at each node of a Timoshenko beam finite element. The results of several numerical simulations are presented and discussed.

• 한국전기전자재료학회논문지
• /
• 제21권5호
• /
• pp.415-420
• /
• 2008

AAO films were fabricated on two kinds of substrates such as $Al/SiO_2/Si$ and Al/Ni/Ti/Si. To obtain well-aligned AAO film, we optimized process condition for buffer layer, electrolyte and voltage. In the case of oxalic acid, the AAO film with pore size of approximately 45 nm was obtained at voltage of 40 V, temperature of $10^{\circ}C$, oxalic acid of 0.3 M and widening time of 60 min. Then the thickness of barrier is less than 600 nm. In the case of sulfuric acid, the AAO film has pore size of 40 nm and barrier thickness of 400 nm with optimum conditions such as voltage of 25 V, temperature of $8^{\circ}C$, sulfuric acid of 0.3 M and widening time of 60 min.

• 한국세라믹학회지
• /
• 제14권4호
• /
• pp.248-255
• /
• 1977

The effect of firing temperature, soaking time and batch composition upon the glass phase and pore formation as well as their distribution in slag foamed glass was investigated. Sulfur dioxide gas produced by the oxidation and reduction of metal sulfide in waterslag was attributed to foam forming agent. Slag foamed glass matrix was mainly composed of 35~60% glas phase and melilite crystalline phase. The increment of bentonite addition in batch lowered the foam forming temperature in studied system. The result showed also that the foam size distribution was broadened as th firing temperature wa inbereased.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제11권1호
• /
• pp.101-116
• /
• 1989

Proplast and Porous Polyethylene which have porous structures as low-modulus polymers have been recently used in maxillofacial plastic and reconstructive surgery. The purpose of this study was to compare the response of adajacent tissue, new bone formation and stability after augmentation by differen methods of subperiosteal graft using proplast and purous polythylene in rabbit mandible. The augmentation procedure was carried out by dividing into two groups, A and B. A group consisted of subperiosteal graft on the cortex, and the other B group was made up only graft following artificial decortication in the mandibular body of rabbit. The experimental animals were sacrificed on the 1st, 2nd, 4th and 8th week after grafting for macroscopic and light microscopic examination. The samples extracted at the 6th postgrafting week were also used for biometric testing and scanning electron microscopic examination. The results obtained from this study were as follows : 1. Macroscopically, infection of graft site, deformation and migration of graft material were not observed in all experimental groups. 2. B group showed more rapid and increased bone formation and the greater stability than A group, and tissue response was similar to each other. 3. In the tissue response, macrophages and cellular infiltrations were observed in Proplast group, but few in PHDPE group. 4. In bone formation of A group, Proplast group showed no bone formation until the 8th week, but PHDPE group showed small quantity of osteoid tissue from the 2nd week and appositional bone growth with new bone formation at the 8th week. 5. In bone formation of B group, both Proplast and PHDPE group showed bone formation, but PHDPE group showed more rapid and larger bone formation. 6. In pattern of bone formation, Proplast group mainly showed appositional bone growth pattern connected with graft site. On the other hand, PHDPE group showed mixed pattern of new bone formation in the pore connective tissue with appositional bone growth from graff site. 7. The maximum mean values of shear stress were serially $111.3gf/mm^{2}$ in PHDPE of B group, $84.8gf/mm^{2}$ in PHDPE of A group, $32.9gf/mm^{2}$ in Proplast B group, and $15.7gf/mm^{2}$ in Proplast of A group. From above results, It was suggested that the capacity of bone formation and stability between bone and graft material were dependent on the pore size and structure of graft material itself, the state of graft site and tissue response.

• Journal of Applied Biological Chemistry
• /
• 제60권2호
• /
• pp.179-184
• /
• 2017

톨라신은 1.9 kDa의 펩티드 독소로서 Pseudomonas tolaasii에 의해 생성되며, 재배중 느타리버섯에 갈반병을 일으킨다. 톨라신은 막에 pore를 형성하여 세포 구조를 파괴하고, 버섯 재배의 생산성을 심하게 감소시킨다. 톨라신에 의한 세포독성의 작용 기작은 완전히 밝혀지지 않았지만, 분자다중화에 의해 세포막에 채널구조 형성으로 이루어진다. 그러므로, 톨라신과 작용하는 식품첨가물 중에 톨라신의 다중화결합을 통한 세포막 pore 형성을 저해하는 물질이 있을 것이다. 본 연구에서는, 다양한 물질들이 톨라신의 활성을 저해함을 확인하고, 이들을 톨라신 저해물질(TIF)이라 명명하였다. 대부분의 톨라신 저해물질들은 식품가공과정에 쓰이는 유화제였다. 다양한 종류의 저해물질 중에 지방산과 에스터 결합한 polyglycerol과 지방산과 에스터 결합한 sucrose 화합물이 $10^{-4}-10^{-5}M$ 농도범위에서 톨라신의 세포독성을 효과적으로 저해하였다. 이러한 저해물질들은 균상재배하는 느타리버섯에서 갈반병의 발생을 성공적으로 억제하였다.

• BMB Reports
• /
• 제48권1호
• /
• pp.13-18
• /
• 2015

Alzheimer's disease severely compromises cognitive function. One of the mechanisms to explain the pathology of Alzheimer's disease has been the hypotheses of amyloid-pore/channel formation by complex $A{\beta}$-aggregates. Clinical studies suggested the moderate alcohol consumption can reduces probability developing neurodegenerative pathologies. A recent report explored the ability of ethanol to disrupt the generation of complex $A{\beta}$ in vitro and reduce the toxicity in two cell lines. Molecular dynamics simulations were applied to understand how ethanol blocks the aggregation of amyloid. On the other hand, the in silico modeling showed ethanol effect over the dynamics assembling for complex $A{\beta}$-aggregates mediated by break the hydrosaline bridges between Asp 23 and Lys 28, was are key element for amyloid dimerization. The amyloid pore/ channel hypothesis has been explored only in neuronal models, however recently experiments suggested the frog oocytes such an excellent model to explore the mechanism of the amyloid pore/channel hypothesis. So, the used of frog oocytes to explored the mechanism of amyloid aggregates is new, mainly for amyloid/pore hypothesis. Therefore, this experimental model is a powerful tool to explore the mechanism implicates in the Alzheimer's disease pathology and also suggests a model to prevent the Alzheimer's disease pathology.

• 멤브레인
• /
• 제18권1호
• /
• pp.53-64
• /
• 2008

벤토나이트 현탁액에 의한 폴리에틸렌 정밀여과 모세관 막의 오염특성에 대하여 검토하였다. 막오염의 윈인은 막표면 위에서 생성되는 케익층의 성장과 입자들이 세공을 막는 표준 및 완전세공막힘 때문이었으며, 막오염은 이들 세 가지 오염형태가 동시에 발생하지만 케익여과오염에 의해 크게 지배를 받는다. 운전압력 $1.0kg/cm^2$에서 총 막오염에 대한 성분오염의 비율은 표준세공막힘 3.36%, 완전세공막힘 3.18% 그리고 케익여과오염 93.46%이었다. 현탁액의 농도가 1000 ppm인 경우에는 완전세공막힘 1.71%, 표준세공막힘 1.90% 그리고 케익여과오염이 96.39%이었으며, 운전초기에 총 오염의 96.14%가 발생했다. 총 오염에 대한 케익여과의 영향은 세공이 $0.34{\mu}m$막에서 컸다. 순환흐름속도의 증가로 인해 성분오염은 약 10.20% 감소하였고, 총 오염에 대한 세공막힘의 비율은 높았다.

• 한국세라믹학회지
• /
• 제36권6호
• /
• pp.646-654
• /
• 1999

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2003년도 추계총회 및 연구발표회 초록집
• /
• pp.72.2-72
• /
• 2003

• 폴리머
• /
• 제24권3호
• /
• pp.342-349
• /
• 2000

아이소탁틱 폴리프로필렌과 대두유 시스템으로부터 열유도 상분리 및 연신공정에 의하여 중공사막을 제조하였다. 막의 구조와 성능에 관계되는 각종 조업변수들의 영향을 조사하였고 이들을 최적화하였다. 폴리프로필렌/대두유의 용융점도가 microfibril 형성에 영향을 미침을 확인하였고 기핵제를 첨가함에 따라 핵생성 밀도가 증가하여 연신에 의한 구정 간의 기공형성이 향상되었다. 막을 열처리함으로써 연신 시 유도되었던 stress를 이완시켜 막의 수축현상을 방지하여 다공도를 유지할 수 있었다. 기핵제를 첨가한 경우 고-액 상분리에 의하여 구조가 형성되며 응고조의 온도 변화에 따라 핵 생성 밀도가 변화하게 되고 이에 따라 연신에 의한 기공 형성이 영향을 받게 되었다. 기핵제를 첨가하지 않은 경우 핵 생성이 활발하지 않아서 주로 액-액 상분리 거동이 구조 형성에 영향을 미치게 되며 응고조 온도 변화에 따른 효과가 기핵제를 넣은 경우와는 반대의 경향을 나타내었다.