• Geomechanics and Engineering
• /
• 제34권2호
• /
• pp.125-138
• /
• 2023

To improve the understanding of infiltration characteristic of modified slurry and the support efficiency of filter cake in silty sand strata, the slurry infiltration (SI) and filter cake formation (FCF) were investigated in a laboratory apparatus. The water discharge and the excess pore pressure at different depths of silty sand strata were measured during SI. The relationship between permeability coefficient/thickness ratio of filter cake (k_c/ΔL) and effective slurry pressure conversion rate of filter cake (η) were analyzed. Moreover, the SI and FCF process as well as the modification mechanism of CMC (carboxymethyl cellulose) were clarified. The experimental results indicate the formation of only external filter cake in the silty sand strata. The slurry particles obtain thicker water membrane after being modified by CMC, which blocks partial water path in filter cake and decreases the water discharge significantly. The silty sand excavated from tunnel face also contributes to the water discharge reduction. The k_c of the external filter cake ranges from 3.83×10^-8 cm/s to 7.44×10^-8 cm/s. The η of the external filter cake is over 96%, which decreases with increasing k_c/ΔL. A silty sand content within 10% is suggested during construction to ensure the uniformity of the filter cake.

• Parasites, Hosts and Diseases
• /
• 제32권2호
• /
• pp.65-74
• /
• 1994

반지락큰입흡충 Pmpemn timondavidi(Digenea: Gynulophallidae)의 발육단계별 표피 미세구조를 주사전자현미경으로 관찰하였을 피낭유충은 반지락(TqvesphiEippinam)으로부터 분리하였고 유약충 및 성충은 피낭유충을 마우스에 경구 감염시킨 다음 1일. 2일 3일 및 7일째에 소장으로부터 회수하였다. 피낭유충은 큰 구흡반과 측면돌기를 가지고 있었다. 구흡반의 구순에는 제1형 및 제2형 감각유두가 밀집하여 있었으며. 측면돌기 내측에 제3형 감각유두가 관찰되었다 생식공은 복흡반 전방으로 멀리 떨어져 위치하였으며, 생식공 주위에 제1형 감각유두가 밀집되어 있었다 피극은 흡반의 구순과 생식공 주변을 제외한 전 충체 표피에 모두 분포하였다. 감염 1일의 유약충에서는 복흡반이 발달되어 있었고, 구순의 내연과 외연에 제1형 및 제2형 감각유두가 6개씩 관찰되었다. 복흡반 바로 전방에는 제1형 감각유두 2개가 분포하고 있었다. 생식공은 매우 작으며 주위에 제1형 감각유두 15개가 분포하였다 감염 2-7일의 충체들은 성장이 계속될수록 피극의 분 자수가 많아졌고, 생식공 위로 생식강(genital atrium)이 생겨 생식공을 덮고 있었으며, 원형질 이 분화하여 돌기와 함몰부가 많이 생겼다. 감염 2일 및 3일 된 유약충들의 구흡반 구순에는 제2형 감각유두 4개가 분포하는 것이 특이하였다. P. timondavidi는 구흡반의 감각유두 배열, 생식공 주위 의 제1형 감각유두 분포와 모양 및 복흡반 전방에 제1형 감각유두 2개의 존재 등으로 다른 Gymnophallidae과의 충체들과 구별할 수 있었다.

• 한국지반공학회논문집
• /
• 제20권7호
• /
• pp.171-181
• /
• 2004

본 연구는 불포화 상태 전 범위에 대한 사질토의 인장강도 모델화 가능성을 조사하기 위해 실시 되었다. 새로 개발된 직접인장시험기법을 이용하여 인장시험이 실시되었다. 측정된 결과는 Rumpf 및 Schubert가 동일크기의 이상적인 구에 대해 개발한 이론적인 인장강도 모델들에 의한 예측 값과 비교 되었다. 이를 위해 석션-포화실험을 통해 얻어진 흙-수분특성곡선을 이용하여 이론모델에 있어 중요한 요소인 불포화상태(pendular, funicular, capillary) 구분 및 음의 간극수압 값을 산정하는데 사용하였다. Pendular 상태에서 불포화모래의 비선형 거동이 Rumpf의 모델에 의해 적절이 묘사되었다. Funicular 및 capillary상태의 경우, 함수비가 증가함에 따라 인장강도가 증가하다 최고 값이 도달한 후 다시 감소하는 실험 측정치의 경향도 Schubert의 모델에 의해 적절히 묘사되었다. 본 비교 연구는 이상적인 단일 크기의 입자에 대해 개발된 이론적인 모델이 다양한 크기를 갖는 불포화 사질토의 인장강도를 예측할 수 있다는 가능성을 뒷받침해준다.

• 한국생산제조학회지
• /
• 제19권1호
• /
• pp.140-144
• /
• 2010

In recent years there has been a growing interest for the use of natural fibers in composite applications due to their low cost, environmental friendliness, and good mechanical properties. The purpose of this study is to determine the characteristic of bending strength on bamboo fiber reinforced polymer composites. The parameters of RTM process depend on the weight ratio of bamboo fiber and resin, the number of bamboo ply and amount of hardening agent. Besides the existence of pore in composites according to vacuum time investigated a effect on mechanical properties of reinforced polymer composites. Test result shows that compressive strength was a maximum(approximately 1,840kgf/$cm^2$) value when weight ratio of resin was 12%.

• Applied Microscopy
• /
• 제30권2호
• /
• pp.205-212
• /
• 2000

Present study was performed to observe the surface ultrastructures of Stictadora furcatum (Trematoda: Heterophyidae). Adult worms were recovered from the cat experimentally infected with metacercariae, and were prepared for scanning electron microscopy. The body was leaf-like and ventrally concave. The oral sucker armed with prominent tegumental spines on the inner surface, and it's lips were obscure. Sensory papillae (type I) in single or grouped forms symmetrically arranged around the oral sucker. The ventrogenital opening retained protruding gonotyl spines and sperms discharged from the genital pore . The body surface was covered with scale-like multipointed tegumental spines. The density and digitated point of spines were gradually decreased toward the posterior end of the body. The digitated points of spines on the anterior portion were 9-12, on the middle were 7-8 and 5-6, and on the posterior were 2-3 and peg-like. Although the tegumental ultrastructure of S. fuscatum was generally similar to those of other heterophyid flukes , the oral sucker with tegumental spines on the inner surface and without obvious lips, and the ventrogenital opening with protruding gonotyl spines were suggested to be the characteristic features.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.749-752
• /
• 2001

Very fine cobalt oxide xerogel and ambigel powder were prepared using a unique solution chemistry associated with the sol-gel process. The mesoporous structure of the initial gel is maintained by removing fluid under conditions where the capillary forces that result extraction are either low or no existent, are either low or nonexistent. Controlling both the pore and solid architecture on the nanoscale offers a strategy for the design of supercapacitor. The results materials determine by using electrode that mixed ketjen black and PVdF. But CoO$\_$x/ have the low voltage, so we experimente to change electrolyte and various concentration.

• 대한화학회지
• /
• 제56권5호
• /
• pp.591-596
• /
• 2012

Preparation of $AlPMo_{12}O_{40}$ (AlPMo) salts, supported on mesostructured SBA-15 silica, by the reaction deposition strategy causes the formation of isolated AlPMo nanocrystals inside the nanotubular channels. The remarkable characteristic of the SBA-15 structure is that all the cylindrical pores are connected by some small channels. This makes the whole pore system in SBA-15 three-dimensional. We have used 2D hexagonal SBA-15 silicas as hard templates for the nanofabrication of AlPMo salt nanocrystal. The oxidation of alcohols occurs effectively and selectively with $H_2O_2$ as the oxidant. AlPMo salt nanocrystal was used as the catalyst.

• 한국세라믹학회지
• /
• 제28권11호
• /
• pp.917-925
• /
• 1991

For the present experiment five Portland cement mortars are in order: mortars with two different water/ cement ratios (W/C=0.45 and 0.50, each having no chemical additive), and those with an additive such as superplasticizer, air-entraining agent or water-repelling agent. We fix the W/C ratio of mortars having additive so that their pastes can yield the same workability as that of the cement mortar of W/C=0.50 with no additive. It is shown that the freeze-thaw resistivity depends heavily on the characteristic of wide pores. Despite a good deal of wide pores, the air-entrained specimen shows a good freeze-thaw resistivity due to appropriate air-pores. And also the specimen with water-repelling agent, which proves to cause the microstructure to become hydrophobic, make good resistance to freeze-thaw cycles in spite of its high wide-porosity. Our suggestion is that the freeze-thaw durability of Portland cement mortar/concrete can be more effectively enhanced by using air-entraining agent or water-repelling agent, and simutaneously by taking proper measures against foaming and/or the increased tendency of wide-pore building due to additive.

• Journal of the korean society of oceanography
• /
• 제31권1호
• /
• pp.37-42
• /
• 1996

Acartia bifilosa has been classified as Rostratae group of Acartia by the characteristic of having the rostral filament. However, we have found that A. bifilosa does not have any rostrum. Therefore, A. bifilosa should be classified as Arostratae group. For the first time, we have observed that this species has only one genital pore in the genital segment. Two spermathecal canals are looped in lateral view as well as ventral view. We have also observed two thin, very short filaments and minute apertures on the anterio-ventral part of the top of the head. The function of the filaments need to be investigated.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.305-305
• /
• 2009

The carbon nano-structured materials could be applied to the fields of advanced fillers, templates, electrode materials, sensor, storage, and absorption materials. The polyacrylonitrile (PAN) based carbon nano-particles provide the remarkable properties of high specific surface area, large pore volume, chemical inertness, and good mechanical stability. In this study, well-defined carbon nano-particles were obtained through pyrolysis of polyacrylonitrile based particles. The precursor nano-particles were prepared by modified aqueous dispersion polymerization using hydrophilic poly(vinyl alcohol) in a water/ N,N-dimethylformamide mixture media. Synthesized precursor nanoparticles have relatively monodisperse particles ranging 80 ~ 250nm. Stable spherical particles are obtained without coagulum or secondary particles in our system. The characteristic of the carbon nanoparticles were investigated in terms of surface area, morphology, and size distribution.