• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.501-513
• /
• 2017

This study analyzed the situation of urban agriculture development through theories, paradigms, and typology to determine the application frequency and development keywords about space forming. The results showed that urban space by distance determines "Dimension of space forming" through self-production, public-production, and nation-social operation. Second, the complex space by shape determine "Identity of space forming" through "Flat Shape" for using the widespread land, "Compact Shape" for overcoming the small and poor land, and "Fusion of Flat Compact Shape" for systematic use between Flat and Compact. Third, building and interior space according to location determine the "Utility of space forming" through land, roof, wall, veranda, interior, and infrastructure space. The concepts about space forming of urban agriculture have an organic correlation and will be developed sustainably by the evolved cases from now on. In addition, space forming of urban agriculture produces new creation space by various fusion processes and will be a development trend of new urban agriculture.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.8
• /
• pp.2968-2974
• /
• 2010

Nowadays, the PV systems have been focused on the grid connection between the power source and the grid. The PV inverter can be considered as the core of the whole system because of an important role in the grid-interfacing operation. An important issue in the inverter control is the load current regulation. In the literature, Proportional Integral (PI) controller, which is normally used in the current-controlled Voltage Source Inverter (VSI), cannot be a satisfactory controller for an AC system because of the steady-sate error and the poor disturbance rejection, especially in high-frequency range. Compared with conventional PI controller, Proportional Resonant (PR) controller can introduce an infinite gain at the fundamental frequency of the AC source; hence it can achieve the zero steady-state error without requiring the complex transformation and the de-coupling technique. Theoretical analyses of both PI and PR controller are presented and verified by simulation and experiment. Both controller are implemented in a 32-bit fixed-point TMS320F2812 DSP processor and evaluated on a 3kW experimental prototype PV Power Conditioning System (PCS). Simulation and experimental results are shown to verify the controller performances.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.107-114
• /
• 2017

A turbocharger is an engine supercharger that is driven by exhaust gas. It improves the output and fuel efficiency by increasing the charging efficiency of the mixture gas, which is achieved by changing the rotatory power of the turbine connected to the exhaust passage. It is important to control the supercharging for this purpose. A nozzle slide joint is one of the core parts. Austenitic stainless steel is currently used as the material for this part, and its excellent mechanical properties include high heat resistance and corrosion resistance. However, because of its poor machinability, there are many difficulties in producing products with complicated shapes. Machining is used in the production of nozzle slide joints for high dimensional accuracy after metal powder injection molding. As design variables in this study, we investigated the sintering temperature, product stress, deformation rate, radius of curvature of the punch, and angle of the chamfer punch, which are related to the strain and shapes. The goal is to suggest a forming process using Nitronic 60 that does not require machining to manufacture a nozzle slide joint for a turbocharger. Accordingly, we determined the best process environment using finite-element analysis, the signal-noise ratio, and the Taguchi method for experiment design. The relative density and hydrostatic pressure of the final product were in accordance with the results of the finite element analysis. Therefore, we conclude that the Taguchi method can be applied to the design process of metal powder injection molding.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.310-315
• /
• 2017

Although studies evaluating the effects of the blasting vibration on the adjacent structures from various angles have continued, cases of securing the safety of the adjacent buildings and researching the proper blasting method for the field condition by analyzing the vibration waveform of the measuring field while performing the open pit blasting are poor. Therefore, it is necessary to present a remedy for blasting pattern selection through test blasting that is appropriate for field conditions, and is economical and efficient. In this study, open pit blasting work was conducted based on the separation distance applied according to the standard blasting method by test blasting and the vibration regulation standard in the road expansion construction site to measure the blasting vibration value, and the vibration prediction equation by blasting methods was examined using a regression analysis computer program to calculate K, N, and R of the confidence level 95%. By setting the blasting allowed vibration standard of the test blasting target area to 0.3cm/sec, and the charring weight and blasting method by the separation distances according to the blasting vibration estimation equation of the open pit blasting guideline and the blasting vibration estimation equation of the test blasting were compared/analyzed, it was possible to identify the factors that increased the working expenses. In addition, the measurement and analysis of the adjacent structures during open pit blasting and the blasting vibration were performed after selecting the most adjacent structure to the open pit blasting spot to analyze the problems on the test blasting procedure and analysis method in the open pit blasting design/construction guidelines, which appeared in the process of completing open pit blasting construction, and a remedy is presented.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.42-48
• /
• 2016

In this paper, a high-precision peak detector circuit that detects the output voltage information of a fly-back converter is proposed. The proposed design consists of basic analog elements with only one operational amplifier and three transistors. Because of its simple structure, the proposed circuit can minimize the delay time of the detection process, which has a strong impact on the precision of the regulation aspect of the fly-back converter. Furthermore, by using an amplifier and several transistors, the proposed detector can be fully integrated on-chip, instead of using discrete circuit elements, such as capacitors and diodes, as in conventional designs, which reduces the production cost of the fly-back converter module. In order to verify the performance of the proposed scheme, the peak detector was simulated and implemented by using a 0.35 m MagnaChip process. The gained results from the simulation with a sinusoidal stimulus signal show a very small detection error in the range of 0.3~3.1%, which is much lower than other reported detecting circuits. The measured results from the fabricated chip confirm the simulation results. As a result, the proposed peak detector is recommended for designs of high-performance fly-back converters in order to improve the poor regulation aspect seen in conventional designs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.2002-2011
• /
• 2015

This study was performed to determine the levels of physical function (ADL, IADL) and to reveal its association with the related factors in the elderly people. The study subjects were 1,756 (male 872, female 884) people aged over 70 who received medical check-ups and long-term care services between 2009 and 2012 from the National Health Insurance Corporation. As a result, the distribution of impaired ADL and IADL increased significantly with age. Logistic regression showed that the risk ratio of impaired ADL was increased significantly in the following groups: female, urban, low weight, stroke history group, smoking, alcohol drinking, and not regular exercise group. The risk ratio of an impaired IADL were increased significantly in the group of females, low weight, smoking, alcohol drinking. On the other hand the risk ratio of an impaired ADL and IADL was similar in each age group. As above results, the levels of ADL and IADL in the study subjects are closely related to the socio-demographic characteristics and health related behaviors. In particular, they suggested that the levels of ADL and IADL were lower in the poor group of the health-related behaviors, such as smoking, alcohol drinking, and regular exercise.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.209-214
• /
• 2017

Most of the present potential transformers of train vehicles are of the oil-type filled with insulating oil and are susceptible to problems such as explosion due to the increase in the internal pressure during train operation and poor reliability near the end of their life cycle. As a solution to this problem, it is necessary to develop a molded dry-type potential transformer with excellent pressure-resistance performance using insulating resin. In order to localize the product, the Korea Railroad Research Institute has been developing a molded dry-type potential transformer. As part of this research, it is necessary to analyze the vibration characteristics of the developed product and to check the transformer performance in a vibration environment. In this study, a resonance test and simulated long-term life test of the developed product were conducted according to the KS R 9144 and IEC 61373 standards, respectively, which are vibration test methods for railway vehicle parts. Their natural frequencies were analyzed by comparing the results of the numerical modal analysis and resonance test, in order to confirm their adherence to the standards. Also, the performance test after the simulated long-term life test confirmed that the operation of the developed transformer was not problematic even in a long-time vibration environment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.427-436
• /
• 2016

Due to disasters such as earthquakes and landslides in urban areas, persons have been buried inside collapsed buildings and structures. Rescuers have mainly utilized detection equipment by applying sound, video and electric waves, but these are expensive and due to the directional approaches onto the collapsed site, secondary collapse risk can arise. In addition, due to poor utilization of such equipment, new human detection technology with quick and high reliability has not been utilized. To address these issues, this study develops a wireless signal-based human detection module that can be loaded into an Unmanned Aerial Vehicle (UAV). The human detection module searches for the 3D location for buried persons by collecting Wi-Fi signal and barometer sensors data transmitted from the mobile phones. This module can gain diverse information from mobile phones for buried persons in real time. We present a development framework of the module that provides 3D location data with more reliable information by delivering the collected data into a local computer in the ground. This study verified the application feasibility of the developed module in a real collapsed area. Therefore, it is expected that these results can be used as a core technology for the quick detection of buried persons' location and for relieving them after disasters that induce building collapses.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.268-277
• /
• 2017

This study was performed to determine the level of physical health(ADL, IADL) and mental health (cognitive impairment, dementia) among centenarians and to find the related factors. The study subjects were 268 centenarians who received medical check-ups from the National Health Insurance Corporation during 2011-2014. From the results, the factors that significantly influenced the ADL of the study subjects were gender, residential area, IADL, cognitive impairment and dementia. ADL and cognitive impairment were selected as the influencing factors of IADL, smoking status, ADL and IADL were selected as the influencing factors of cognitive impairment, and gender and ADL were selected as the influencing factors of dementia. These results suggested that the levels of physical and mental health of the centenarians were significantly affected by socio-demographic characteristics and health-related variables. Especially, the levels of physical and mental health were decreased with the poor group of health-related variables such as smoking, alcohol drinking and regular exercise.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.375-381
• /
• 2017

This study examined whether a correlation exists between the oral health indices assessed by experts and the self-perceived oral health status to develop practical oral health improvement programs for adults. In addition, this study provides basic data for carrying out oral health projects that can enhance the quality of life of adults. The raw data for the 2nd year (2014) of the 6th national health and nutrition survey were analyzed. Among those surveyed, adults over the age of 19 were designated as research subjects. In all age groups, correspondents with a higher DMFT Index assessed their self-perceived oral health status to be 'poor'. The oral health index evaluated by experts showed a correlation with the self-perceived oral health status. Therefore, as a higher self-perceived oral health status might help improve the objective oral health indices, oral health improvement programs should be strengthened to instill self-perceived oral health behavior.