• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2016년도 춘계학술대회
• /
• pp.135-136
• /
• 2016

초고강 콘크리트를 활용한 부잔교는 강재부잔교에 비해 부식의 염려가 없어 내구성과 동적안전성이 우수하고, 일반 콘크리트에 비해 경량구조물로 건현확보가 유리하다. 현재 국내 연구개발 결과 SUPER concrete는 100MPa까지는 강섬유의 배합없이 일반골재만으로 배합이 가능하여 고부식성 환경의 항만구조물의 내구성에 적합한 강도이다. 부잔교는 상부슬래브에 작용하는 차량(DB-18) 또는 군집하중(5kN/m2)과, 외부 벽체 및 하부슬래브에 작용하는 파력의 수평과 양력성분을 견디도록 하여야 한다. 설계 파랑은 인천 연평도지역을 대상으로 50년 빈도 유의파와 주기에 해당하는 파력을 산정하여 X,Y축 위치에 따라 수평 및 양력성분을 재하하였다. 전체계 해석시 부잔교는 연직방향 경계조건이 없는 상태에서 부력 산정이 가능하도록 기하비선형 및 시간이력해석기법을 응용하였다(Strand 7). 부잔교 슬래브에 대해서는 실물모형실험을 통해 DB-18하중 재하에 따른 안전성을 확인하였다.

• 한국항해항만학회지
• /
• 제36권3호
• /
• pp.215-223
• /
• 2012

플로팅 함체의 강성변화가 상부 철골모멘트연성골조에 미치는 영향을 확인하기 위해 함체의 높이를 1.5m, 2.0m, 2.5m로 변화시키면서 파랑하중 3초에서 15초에 대하여 동적 유체 해석과 그에 따른 파력을 산정하고 정적 구조 해석을 수행하였다. 해석결과, RAO-피치와 상부 골조의 모멘트 증가량이 선형적인 관계이고 함체의 곡률이 구조물의 강성과 반비례함을 확인하였다. 이러한 선형적 결과를 종합하여, 임의의 함체에 대한 상부골조의 해석 결과를 이용하여 함체 높이가 다른 경우에도 상부 골조의 모멘트를 추정하는 절차를 제안하였으며, 추정결과가 해석결과와 상당히 잘 일치함을 확인하였다.

• Ocean Systems Engineering
• /
• 제9권4호
• /
• pp.423-448
• /
• 2019

Very Large Floating Structures (VLFS) are one among the solution to pursue an environmentally friendly and sustainable technology in birthing land from the sea. VLFS are extra-large in size and mostly extra-long in span. VLFS may be classified into two broad categories, namely the pontoon type and semi-submersible type. The pontoon-type VLFS is a flat box structure floating on the sea surface and suitable in regions with lower sea state. The semi-submersible VLFS has a deck raised above the sea level and supported by columns which are connected to submerged pontoons and are subjected to less wave forces. These structures are very flexible compared to other kinds of offshore structures, and its elastic deformations are more important than their rigid body motions. This paper presents hydroelastic analysis carried out on an innovative VLFS called truss pontoon Mobile Offshore Base (MOB) platform concept proposed by Srinivasan and Sundaravadivelu (2013). The truss pontoon MOB is modelled and hydroelastic analysis is carried out using HYDRAN-XR^* for regular 0° waves heading angle. Results are presented for variation of added mass and damping coefficients, diffraction and wave excitation forces, RAOs for translational, rotation and deformational modes and vertical displacement at salient sections with respect to wave periods.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2017년도 특별논문집
• /
• pp.105-108
• /
• 2017

Condensation is one of the common issues which we can easily see in everyday life. For example, the surface of glasses with cold water is easily moisturized. This wet surface gives us uncomfortable feeling and is sometimes dangerous because it is slippery. As the safety on working space is one of the most important issue on offshore project, condensation is also important matter to take care of with precaution. Since the bottom of vessel or offshore facility is submersed in the water, the risk of having condensate on the steel surface is getting higher because sea water temperature is normally lower than ambient temperature. And if there is any electric equipment or person working in that space, condensation is normally not allowed. The pontoon of semi-submersible drilling rig is such a space which is submersed, with electric and mechanical equipments and person working periodically. To prevent condensation in pontoon, study was conducted by checking several cases.

• 대한조선학회논문집
• /
• 제39권4호
• /
• pp.32-41
• /
• 2002

본 논문에서는 고차경계요소법을 사용하여 폰툰형 초대형 구조물의 유탄성 응답을 해석하였다. 폰툰형 구조물의 설치가 예상되는 천수심 해역에서 유탄성 응답 해석에서 흘수의 영향을 고찰하였다. 초대형 구조물인 경우 실제 해상파의 파장 범위인 단파장 구간일 때 흘수의 영향을 무시한 해석은 구조물의 유탄성 응답과 상대파고를 과소평가 하는 것으로 나타나 폰툰형 구조물에서도 흘수 영향을 고려한 해석이 중요함을 보였다.

• 한국해양공학회지
• /
• 제33권2호
• /
• pp.106-115
• /
• 2019

The interaction between a sloshing liquid damper (SLD) tank and a rectangular pontoon was investigated under the assumption of the linear potential theory. The eigenfunction expansion method was used not only for the sloshing problem in the SLD tank but also for analyzing the motion responses of a rectangular pontoon in waves. If the frictional damping due to the viscosity of the SLD tank was ignored, the effect of the SLD appeared to be an added mass in the coupled equation of motion. The installation of the SLD tank had a greater effect on the roll motion response than the sway and heave motion of the pontoon. One resonance peak for rolling motion showed up in the case of a frozen liquid in the SLD tank. However, if liquid motion in the SLD tank was allowed, two peaks appeared around the first natural frequency of the fluid in the SLD tank. In particular, the peak value located in the low-frequency region had a relatively large value, and the peak frequency located in the high-frequency region moved into the high-frequency region as the depth of the liquid in the tank increased.

• 대한조선학회논문집
• /
• 제40권5호
• /
• pp.53-59
• /
• 2003

Ocean space utilization using VLFS(Very Large Floating Structures) can provide environmental impact free space by allowing sea water flow freely through the floating structure. Use of Pontoon type VLFS for that purpose needs employment of breakwaters for reduction of wave effects. Therefore, in order to maximize advantage of environmental impact free structure, the breakwater should be the one that can allow water flow freely through it, too. In this paper hydroelastic response of a pontoon type structure is analyzed considering breakwaters which allow water flow through its opening at bottom of the breakwaters. Mode superposition technique is used for solving equation of flexible body while interactions between the pontoon and breakwaters is considered based on generalized mode concept. Bi-quadratic nine node higher-order boundary element method is adopted for more accurate numerical treatment near sharp edged body shape. Performance of various combinations of breakwaters is investigated.

• 한국해양공학회지
• /
• 제19권2호
• /
• pp.19-28
• /
• 2005

The present paper outlines the numerical investigation of the incident wave interactions with fully submerged and floating dual double hull pontoon/vertical porous membrane breakwaters. Two dimensional five fluid-domains hydro-elastic formulation was carried out in the context of linear wave body interaction theory to study the wave interaction with the double hull of pontoon-membranes. The submerged circular pontoon is consisted of double hulls, which is filled with water in the void space between the outer structure and inner solid buoyant structure. Hydrodynamic characteristics of the proposed system with dual floating double-hull-pontoons filled with water have been studied numerically for the various incident waves. This study is a beginning stage research for the dual double hull porous pontoons/vertical porous membranes breakwaters which is ideally designed in order to suppress significantly the transmitted and reflected waves simultaneously.

• 해양환경안전학회지
• /
• 제13권3호
• /
• pp.213-217
• /
• 2007

폰툰형 초대형 부체구조물은 해양공간의 활용에 있어서 가장 많이 고려되고 또한 적극적으로 연구되어지는 분야이다. 폰툰형 부체구조물의 해상에서의 유탄성 변형은 입사하는 파와 접하는 풍상측에서 가장 큰 값을 나타내고 있다. 본 연구에서는 폰툰형 부유체에 작용하는 파랑강제력을 감소시키고자 개발된 부유식 수평 몰수평판의 효과를 수치해석적인 방법에 의하여 그 특성을 파악하고자 한다. 유한차분법을 토대로 한 수치계산법을 적용하고, 적용된 수치계산법을 실험값과 비교함으로서 프로그램의 신뢰성을 확인한다. 검증된 수치계산법을 이용하여 본 연구에서 실시하고자 하는 폰툰형 부유체에 작용하는 파랑강제력의 계산을 수행하고 그 결과에 대하여 논의한다.

• 대한조선학회논문집
• /
• 제42권1호
• /
• pp.43-49
• /
• 2005

in this paper a dolphin-fender moored pontoon-type floating structure in shallow water depth is studied focusing on mooring force. The pontoon-type floating structure is 500m long, 300m wide. The structure has partially non-uniform drafts of 2.0m and 3.0m. The employed mooring system is a guyed frame type dolphin-fender system. The 1/125 scale model fender system is made of rubber tube to have hi-linear load deflection characteristics. A series of model tests has been conducted focusing on motion and fender force responses in regular and irregular waves at KRISO's ocean engineering basin Non-linear numerical simulation of fender reaction force has been carried out and the results are compared with those of model tests. The simulated rigid body motion and mooring forces also have been compared with the test results.