• 제목/요약/키워드: Pontic

검색결과 77건 처리시간 0.025초

금속-도재 가공치 하부구조 제작에서 이상적인 형태와 임상에서 사용되는 형태의 차이 분석 (A study on the difference analysis between an ideal and a clinical shape in case of manufacturing a metal-ceramic pontic substructure)

  • 김욱태;임수연
    • 구강회복응용과학지
    • /
    • 제32권1호
    • /
    • pp.8-15
    • /
    • 2016
  • 목적: 본 연구 목적은 임상에서 사용되고 있는 금속-도재 가공치 하부구조물이 적절하게 설계되었는지 판단하고 모양과 크기 및 위치에 따라 발생할 수 있는 문제점을 파악하여 설계 시 기초 원리에 기반하여 제작하는 것을 강조하였다. 연구 재료 및 방법: 금속-도재 가공치 하부구조 제작에서 이상적인 형태와 임상에서 사용되는 형태의 가공치 기저면(P1), 양 인접면(C), 치경연(P2) 및 순면 최대 풍융부위로 올라가는 치경 1/3부위(P3)의 도재 두께를 측정 하여 일원배치 분산분석 및 사후 검정을 수행하였다. 결과: 측정한 부위의 도재 두께를 비교한 결과 각 그룹 간에는 통계적 유의성이 없었다(P > 0.05). 결론: 본 연구에서 제시하는 금속하부 구조물은 가공치가 갖추어야 할 요구요건을 충족하고 있어 임상적으로 사용이 가능하다.

최대교합 및 기능교합시 하악구치부 연장가공의치에 발생하는 응력에 대한 삼차원 유한요소법적 연구 (A STUDY ON THE STRESS DISTRIBUTION OF CANTILEVER BRIDGE UNDER MAXIMUM BITE FORCE AND FUNCTIONAL BITE FORCE USING THREE DIMENSIONAL FINITE ELEMENT METHOD)

  • 박창근;이선형;정헌영;양재호
    • 대한치과보철학회지
    • /
    • 제32권4호
    • /
    • pp.484-514
    • /
    • 1994
  • Cantilever bridge is widely used by mny clinicians, but its worst mechanical character, so called Class I lever system, makes dentists hesitate to restore the missing tooth with it. Therefore it is important to study stress of the cantilever bridge. In this study, two models of cantilever bridges that restores the missing mandibular second molar with two abutment teeth were constructed. One model was a type of cantilever bridge supported by a normal alveolar bone, the other one was supported by an alveolar bone resorbed to its 1/3 of root length. Maximum bite force(550N) and funtional maximum bite force(300N) were vertically applied to the distal end of the pontic, distal 1/3, and distal half of the pontic. And each force was also applied to centric occlusal contacts as a distributed force. Total 16 loading cases were compared and analyzed with 3-dimensional finite element method. The results were as follows: 1. The stress was concentrated on the joint of the pontic and the retainer, grooves, and distal cervical margin of the posterior retainer. 2. In case of maximum bite force(550N) at the end of the pontic, the risk of fracture at the joint of the pontic and the retainer was high. 3. In case of distributed force in centric occlusion and functional maximum bite force(300N), the stresses were less than the yield strength of the type VI gold for any loading cases. 4. In case of alveolar bone resorption, the occlusal force to the cantilever pontic caused more stress on the root apex and less stress on the alveolar crest region of the distal surface of the posterior abutment. 5. In case of alveolar bone resorption, the displacement was larger than that of normal alveolar bone in all loading cases.

  • PDF

Ovate pontic 제작법

  • 이종엽
    • 대한치과보철학회:학술대회논문집
    • /
    • 대한치과보철학회 2004년도 춘계학술대회
    • /
    • pp.25-25
    • /
    • 2004
  • PDF

심미적 부위에서 가공치 하방 잔존치조제의 형성 및 연조직 복제 모형을 이용한 고정성 보철물 수복증례 (Pontic site development and soft tissue transfer of the esthetic area: a case report)

  • 김학천;노관태;권긍록;김형섭
    • 대한치과보철학회지
    • /
    • 제51권4호
    • /
    • pp.323-331
    • /
    • 2013
  • 고정성 국소의치를 이용한 수복 시 보철물 자체의 심미성뿐 아니라 보철물과 조화로운 주변 연조직의 형성 또한 중요한 요소이며, 임시보철물을 이용하여 조화로운 연조직의 형태를 형성할 수 있다. 임시보철물을 통해 형성한 연조직의 형태는 적절한 형태를 갖는 최종 수복물을 제작하는데 필요한 정보를 제공할 수 있도록 최종모형으로 정확하게 복제되어야 한다. 그러나, 임시보철물 주위 연조직의 형태는 인상과정 또는 인상재의 압력 등으로 최종 모형으로의 복제가 어렵다. 따라서, 임시보철물을 이용하여 형성한 구강내의 연조직 형태를 모형으로 복제하여 연조직과 조화로운 최종 수복물을 제작하는 서로 다른 2가지 방법을 본 증례보고에서 소개한다.