• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.4
• /
• pp.488-500
• /
• 2013

The objective of this study was to compare the effectiveness of the protocols for superstimulation of follicular growth in Thai native heifers. Heifers (n = 20) were randomly divided into four groups of five heifers/group. Heifers were given a single dose by i.m. administration of 100 mg Follicle Stimulating Hormone dissolved in polyvinylpyrrolidone (FSHp) at 24 h. Ovum pick up (OPU) occurred at 72 h ($F_{24}O_{72}$ protocol; Group 1) or 96 h ($F_{24}O_{96}$ protocol; Group 2), and at 36 h and OPU at 72 h ($F_{36}O_{72}$ protocol; Group 3) or 96 h ($F_{36}O_{96}$ protocol; Group 4) after follicular ablation. The dynamics of ovarian follicular growth were monitored by twice-daily ultrasonographic examinations. Blood sample collections were performed every 12 h after initiation of treatment for assessment of FSH, E2 and P4 profiles. All heifers were subjected to eight repeated sequential sessions of OPU. The follicular deviation commenced $24{\pm}5.32$ h after follicular ablation in all groups. The circulatory FSH surged quickly from 24 to 36 h (>0.8 ng/ml) after follicular ablation and circulatory estrogen levels steadily increased from 36 h until OPU in all groups. At the end of the OPU sessions, the mean number of aspirated follicles/heifer/session in $F_{36}O_{72}$ protocol (Group 3) and $F_{36}O_{96}$ protocol (Group 4) were higher than in the two other groups (p<0.05). The number of cumulus-oocyte complexes (COCs), cleaved and day 8 blastocysts rates in the $F_{36}O_{72}$ protocol (Group 3) were higher than in the other groups (p<0.05). It can be concluded that a single dose i.m. administration of 100 mg FSHp at 36 h and OPU at 72 h after follicular ablation ($F_{36}O_{72}$ protocol; Group 3) was the most effective protocol for superstimulation of follicular growth for repeated OPU and subsequent in vitro embryo production in Thai native heifers.

• Membrane Journal
• /
• v.29 no.6
• /
• pp.348-354
• /
• 2019

Recently, the application range of organic solvent nanofiltration (OSN) technology has been expanding, requiring membranes with better performance. In this work, thin film composite (TFC) OSN membrane was fabricated. First, ultrafiltration support membrane was prepared via nonsolvent-induced phase separation (NIPS) technique using polysulfone (PSf) and polyethersulfone (PES). Then, the effect of pore forming additives such as polyvinylpyrrolidone (PVP) and pluronic F-127 were employed to improve the membrane permeance. The well-known interfacial polymerization technique was employed using MPD-TMC chemistry to form a thin film on top of the fabricated support, and its solvent permeance and nanofiltration performance was characterized. It was found that polyethersulfone support exhibited more reliable performance compared to polysulfone, and PVP additive was more effective compared to Pluronic F-127. As for the oSN performance, polar aprotic solvents like acetonitrile show significantly higher flux (986.5 L·m^-2·h^-1·bar^-1) compared to water and EtOH (9.5 L·m^-2·h^-1·bar^-1).

• Research in Plant Disease
• /
• v.15 no.2
• /
• pp.57-62
• /
• 2009

Genetic diagnosis method of Virion Captured (VC)/RT-PCR for Rice stripe virus (RSV) and Rice black-streaked dwarf virus (RBSDV), Korean major rice viruses transmitted by small brown plant hopper, Laodelphax striatellus, was developed. Virion extraction buffer for rice plant was 0.01M potassium phosphate buffer, pH 7.0, containing 0.5% sodium sulfite. However, the extraction buffer for L. striatellus was 0.01M potassium phosphate buffer, pH 7.0, containing 0.5% sodium sulfite and 2% polyvinylpyrrolidone wt 40,000 (PVP-40). Specific primers for detection of RSV and RBSDV were selected for VC/RT-PCR method. The specific primers were used as a duplex primer to detect viruliferous small brown plant hopper collected from Gimpo, Pyeongtaek and Siheung areas in Gyeonggi province. The genetic diagnosis methods of single and duplex VC/RT-PCR for RSV and RBSDV could be used easily and economically, especially on the diagnosis of L. striatellus. The rate of viruliferous insect (RVI) for RSV was compared with ELISA and VC/RT-PCR for L. striatellus collected from fields. RVI by ELISA was same as 9.2% with RVI by VC/RT-PCR. However, there were some different detection results between the methods. It could be suggested that there is a possibility of serological and/or genomic differences among RSV isolates. The portion of RVI detected simultaneously by ELISA and VC/RT-PCR was 71.0%, and the detection rate from VC/RT-PCR was higher as 3.2% than that from ELISA, which had a reason of simultaneous detection ability both RSV and RBSDV of VC/RT-PCR.

• Korean Journal of Environmental Biology
• /
• v.34 no.3
• /
• pp.183-192
• /
• 2016

Silver nanomaterials have been intensively applied in consumer products of diverse industrial sectors because of their strong biocidal properties and reported to be hazardous to aquatic organisms once released in the environment. Nanomaterials including sliver, are known to be different in toxicity according to their physicochemical characteristics such as size, shape, length etc. However studies comparing toxicity among silver nanomaterials with different physicochemical characteristics are very limited. Here, toxicities of silver nanomaterials with different size (50, 100, 150 nm), length (10, $20{\mu}m$), shape (wire, sphere), and coating material (polyvinylpyrrolidone, citrate) using OECD test guidelines were evaluated in aquatic species (zebrafish, daphnia, algae) and compared. On a size property, the smaller of silver nanomaterials, the more toxic to tested organisms. Sphered type of silver nanomaterials was less toxic to organisms than wired type, and shorter nanowires were less toxic than longer ones. Meanwhile the toxic effects of materials coated on silver nanomaterials were slightly different in each tested species, but not statistically significant. To the best of our knowledge, it is first investigation to evaluate and compare ecotoxicity of silver nanomaterials having different physicochemical characteristics using same test species and test guidelines. This study can provide valuable information for human and environmental risk assessment of silver nanomaterials and guide material manufacturers to synthesize silver nanomaterials more safely to human and environment.

• Journal of the Korean Chemical Society
• /
• v.61 no.6
• /
• pp.346-351
• /
• 2017

This study was planned considering the chain length, hydrophilicity, and hydrophobicity of the additives to be used in the polymerization, while various ophthalmic lenses that use various additives with similar water contents were manufactured before their optical and physical properties were compared and analyzed. With regard to the additives required for manufacturing high-, medium-, and low-water content lens groups, HEA (hydroxyethyl acrylate), PVP (polyvinylpyrrolidone), and NMV(N-methyl-N-vinylacetamide) were used as additives for preparing the high-water content lens group, HEMA(2-hydroxyethyl methacrylate), HPMA(hydroxypropyl methacrylate) and BD(1,4-butanediol) were used for the medium-water content lens group. For the low-water content lens group, BMA(buthyl methacrylate), BDDA(1,4-butanediol diacrylate), and Bis-GMA(bisphenol A glycerolate diacrylate) were used, respectively. The average water content of HEA was 40.14%; that of PVP, 39.63%; and that of NMV, 40.52%. The mean of water content was 35.92% for HEMA, 35.74% for BD, and 34.62% for HPMA. For the low-water content lens group, the mean of water content was 26.69% for BMA, 27.76% for BDDA, and 26.14% for Bis-GMA. With regard to the results of the water content measurement using a moisture analyzer, the average water content of the high-water content lens group was 41.34% for HEA, 42.62% for PVP, and 42.73% for NMV. Finally, for the low-water content lens group, the average water content was 28.62% for BMA, 28.82% for BDDA, and 28.32% for Bis-GMA. The measurements of the water contents of the lenses using the two methods showed that the water content and refractive index of the lenses were similar in all the lens groups. The measurements of the contact angles, however, showed a different wettability value for each lens with a similar water content. Also, the change tendency of the lens curvature according to the change of time showed that the change amount became larger and the recovery time became longer from the lens samples with a lower water content to those with a higher water content. Based on these results that will be helpful for the study of ophthalmic lenses.

• Journal of the Korean Chemical Society
• /
• v.57 no.5
• /
• pp.618-624
• /
• 2013

We demonstrated unique inter- and intra-plasmonic coupling effects in bimetallic Au@Ag core-shell NP arrays which are regularly or randomly arranged on self-assembled block copolymer (BCP) inverse micelle monolayers. Polyvinylpyrrolidone (PVP)-stabilized Au@Ag core-shell NP arrays in regular or disordered configuration were incorporated and assembled on reconstructed PS-b-P4VP inverse micelle templates through two types of processes. The intensively enhanced LSPR coupling properties of individual and assembled Au@Ag NPs were evaluated by UV-visible spectroscopy in terms of the type of ligand stabilizer, coupling between Au and Ag, thickness of Ag shell, and type of array configuration. Finally, Au@Ag core-shell NP arrays were employed as active substrates for surface enhanced Raman spectroscopy (SERS) and a significantly enhanced signal enhancement was observed in accordance with the coupling intensity of Au@Ag NPs patterns.

• Korean Journal of Materials Research
• /
• v.25 no.8
• /
• pp.423-428
• /
• 2015

Impedancemetric $NO_x$ (NO and $NO_2$) gas sensors were designed with a stacked-layer structure and fabricated using $LaCr_xCo_{1-x}O_3$ (x = 0, 0.2, 0.5, 0.8 and 1) as the receptor material and $Li_{1.3}Al_{0.3}Ti_{1.7}(PO_4)_3$ plates as the solid-electrolyte transducer material. The $LaCr_xCo_{1-x}O_3$ layers were prepared with a polymeric precursor method that used ethylene glycol as the solvent, acetyl acetone as the chelating agent, and polyvinylpyrrolidone as the polymer additive. The effects of the Co concentration on the structural, morphological, and $NO_x$ sensing properties of the $LaCr_xCo_{1-x}O_3$ powders were investigated with powder X-ray diffraction, field emission scanning electron microscopy, and its response to 20~250 ppm of $NO_x$ at $400^{\circ}C$ (for 1 kHz and 0.5 V), respectively. When the as-prepared precursors were calcined at $700^{\circ}C$, only a single phase was detected, which corresponded to a perovskite-type structure. The XRD results showed that as the Co concentration of the $LaCr_xCo_{1-x}O_3$powders increased, the crystal structure was transformed from an orthorhombic phase to a rhombohedral phase. Moreover, the $LaCr_xCo_{1-x}O_3$ powders with $0{\leq}x<0.8$ had a rhombohedral symmetry. The size of the particles in the $LaCr_xCo_{1-x}O_3$powders increased from 0.1 to $0.5{\mu}m$ as the Co concentration increased. The sensing performance of the stack-structured $LaCr_xCo_{1-x}O_3/Li_{1.3}Al_{0.3}Ti_{1.7}(PO_4)_3$ sensors was found to divide the impedance component between the resistance and capacitance. The response of these sensors to NO gas was more sensitive than that to $NO_2$ gas. Compared to other impedancemetric sensors, the $LaCr_{0.8}Co_{0.2}O_3/Li_{1.3}Al_{0.3}Ti_{1.7}(PO_4)_3$ sensor exhibited good reversibility and reliable sensingresponse properties for $NO_x$ gases.

• Microbiology and Biotechnology Letters
• /
• v.16 no.4
• /
• pp.275-281
• /
• 1988

To develop cellulase and xylanase-producing strain by protoplast fusion, alkalophilic Bacillus sp. F204 and K17 were treated with NTG(N-methyl-N'-nitro-N-nitrosoguanidine) and isolated anti-biotics resistant strains of S20 (Km$^r$ , Cm$^r$) and G70 (Str$^r$). The frequency of protoplast formation was about 95% when cells of mid-log phase were treated with 200$\mu\textrm{g}$/ml Iysozyme at 37$^{\circ}C$ for 30-45 minutes. Under addition of 0.4-0.5M sodium succinate, 0.5% casamino acid, 1.5% polyvinylpyrrolidone, 25mM MgC1$_2$ and 50mM CaC1$_2$ to the regeneration medium, the regeneration frequency of Bacillus sp. F204 and K17 was 24.9% and 26.2%, respectively. The fusion frequency was 6.6$\times$10$^{-6}$ in the presence of 30% polyethylene glycol 6000 containing 50mM $Ca^{++}$ at 45$^{\circ}C$ for 5 minutes. Cellulase complex and xylanase activities of fusant were compared with parental strains.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.46 no.4
• /
• pp.371-382
• /
• 2020

There have been continuous attempts to quantify sensory attributes of cosmetic products by measuring relevant physical properties. The most representative method to evaluate stickiness is to measure axial force using texture analyzer. Stickiness is known to correlate with AUC which abbreviates area under curve in the obtained axial force curve as a function of time. Recently, Normandie University research group developed in vivo stickiness evaluation method considering the characteristics of skin along with established evaluation method[8]. Based on the study, we tried to optimize in vivo stickiness evaluation method especially for cosmetic creams. The experiment was carried out on 5 different facial creams products by changing the amount and the times of rolling of creams, and the shape and material of probes. Based on the results of the sensory evaluation, the most consistent conditions were established as the optimal evaluation method. As a result, applying 70 μL of cream and rubbing 10 times for 7 s inside the 3.4 cm circle were judged to be suitable. As for the probes, spherical metallic probe was more proper due to its reproducibility. We conducted the settled method on 10 subjects to check its validity. Although the absolute values of AUC differed depending on the individuals, the AUC values were all ranked the same. Finally, for the standardization of stickiness of AUC, polyvinylpyrrolidone (PVP) was set as a reference material and we measured AUC of its aqueous solution by changing concentration. Then, the degree of stickiness recognition for 5 different creams was surveyed to check the correlation between AUC and stickiness.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.31 no.1
• /
• pp.57-68
• /
• 2023

In this study, coffee waste was recycled into nitrogen-doped porous carbon fibers as an active material for high-energy EDLC (Electric Double Layer Capacitors). The coffee waste was mixed with polyvinylpyrrolidone and dissolved into dimethylformamide. The mixture was then electrospun to fabricate coffee waste-derived nanofibers (Bare-CWNF), and carbonization process was followed under a nitrogen atmosphere at 900℃. Similar to Bare-CWNF, the as-synthesized carbonized coffee waste-derived nanofibers (Carbonized-CWNF) maintained its fibrous form while preserving the composition of nitrogen. The electrochemical performance was analyzed for carbonized coffee waste (Carbonized-CW)-, carbonized PAN-derived nanofibers (Carbonized-PNF)-, and Carbonized-CWNF-based electrodes in the operating voltage window of -1.0-0.0V, Among the electrodes, Carbonized-CWNF-based electrodes exhibited the highest specific capacitance of 123.8F g^-1 at 1A g^-1 owing to presence of nitrogen and porous structure. As a result, nitrogen-contained porous carbon fibers synthesized from coffee waste showed excellent electrochemical performance as electrodes for high-energy EDLC. The experimental designed in this study successfully demonstrated the recycling of the coffee waste, one of the plant-based biomass that causes the environmental pollution into high-energy materials, also, attaining the ecofriendliness.