• 대한환경공학회지
• /
• 제37권3호
• /
• pp.145-151
• /
• 2015

수중의 Sr과 Cs 이온을 제거하기 위하여 폴리술폰(polysulfone, PS)을 이용한 제올라이트 고정화로서 PS-zeolite 비드를 제조하였다. PS-zeolite는 SEM, XRD, FT-IR, TGA를 이용하여 특성 및 구조를 분석하였다. PS-zeolite 비드를 제조하기 위한 최적조건은 PS 1.25 g과 제올라이트 A 2 g이었다. 용액 pH의 증가에 따라 PS-zeolite 비드에 의한 Sr과 Cs 이온의 제거효율은 증가하였지만, pH 4 이상에서 일정하게 되었다. 본 연구에서 제조된 PS-zeolite 비드는 $Na^+$, $K^+$, $Mg^{2+}$ 및 $Ca^{2+}$와 같은 공존이온이 존재하더라도 Sr과 Cs 이온에 대한 높은 선택도를 나타내었다. 또한, 흡착과정에서 PS-zeolite 비드로부터 제올라이트 입자가 탈리되지 않았으며, PS-zeolite 비드는 SEM 이미지 상에서 구조가 유지되었다. PS-zeolite 비드에 의한 Sr과 Cs의 제거효율은 5회 흡착-탈착 실험을 반복하여도 90% 이상 유지되었다. 본 연구에서는 이 결과로서 PS-zeolite 비드가 Sr과 Cs 이온의 흡착제로서 적용가능하다 것을 확인할 수 있었다. 또한, PS-zeolite는 산업폐수처리를 위한 방사성 이온 제거용 흡착제로서도 적용이 가능할 것이다.

• 한국환경과학회지
• /
• 제24권5호
• /
• pp.671-678
• /
• 2015

The adsorption characteristics of Sr and Cs ions were investigated by using PS-zeolite beads prepared by immobilizing zeolite with polysulfone (PS). The adsorption kinetics of Sr and Cs ions by PS-zeolite beads was described well by the pseudo-second-order model. The maximum adsorption capacities of Sr and Cs ions calculated from Langmuir isotherm model were 65.0 mg/g and 76.4 mg/g, respectively. In the binary system of Sr ion and Cs ion, the adsorption capacities of each ion decreased with increasing mole ratio of mixed counterpart ion, and Cs ion showed the higher hinderance than Sr ion. We found that thermodynamic properties of Sr and Cs ions on absorption reaction were spontaneous and endothermic at 293 to 323 K.

• 한국환경과학회지
• /
• 제24권1호
• /
• pp.1-7
• /
• 2015

The solid-phase extractant PS-D2EHPA/TBP was prepared by immobilizing two extractants D2EHPA and TBP in polysulfone (PS). The prepared PS-D2EHPA/TBP was characterized by using fourier transform infrared spectrometer (FTIR) and scanning electron microscopy (SEM). The removal of Cu(II) from aqueous solution was investigated in batch system. The experiment data were obeyed the pseudo-second-order kinetic model. Equilibrium data were well fitted by Langmuir model and the removal capacity of Cu(II) by solid extractant PS-D2EHPA/TBP obtained from Langmuir model was 3.11 mg/g at 288 K. The removal capacity of Cu(II) was increased according to increasing pH from 2 to 6, but the removal capacity was decreased below pH 3 remarkably.

• Bulletin of the Korean Chemical Society
• /
• 제15권2호
• /
• pp.126-132
• /
• 1994

RhCl [P($C_6H_5)_3]_3$ complexes have been incorporated in polysulfone (PS) as a dispersion medium using cosolvent (THF). The interactions between Rh(Ⅰ) complexes and polysulfone polymer molecules are examined by infrared spectroscopy and thermal analysis. The chemical reactivity of Rh in PS films has been investigated by reacting Rh sites with CO, $H_2,\;D_2,\;O_2\;NO,\;C_2H_2\;and\;C_2H_4$ in the temperature range $25-200^{\circ}C$. Various Rh-carbonyl, -hydride and -nitrosyl species formed in PS films are characterized by their infrared spectra. Rh complexes in PS film show interesting catalytic reactivities in the reactions such as hydrogenation of $C_2H_2\;and\;C_2H_4$, oxidation of CO, and reduction of NO by CO or $H_2$ gas under relatively mild conditions.

• 한국환경과학회지
• /
• 제23권11호
• /
• pp.1843-1850
• /
• 2014

PS-D2EHPA beads were prepared by immobilizing di-2-ethylhexyl-phosphoric acid (D2EHPA) with polysulfone (PSf). The removal experiments of Cu(II) and Pb(II) by the prepared PS-D2EHPA beads were conducted batchwise. The removal efficiency of Cu(II) and Pb(II) by PS-D2EHPA beads was increased with increasing pH of solution. The removal rate of Cu(II) and Pb(II) was well described by the pseudo-second-order kinetic model. The maximum removal capacity of Cu(II) and Pb(II) obtained from Langmuir isotherm were 2.58 mg/g and 12.63 mg/g, respectively. External mass transfer coefficients for the removal of Cu(II) and Pb(II) by PS-D2EHPA beads were obtained $0.61{\times}10^{-2}{\sim}5.87{\times}10^{-2}/min$ and $1.55{\times}10^{-2}{\sim}8.53{\times}10^{-2}/min$, respectively and diffusion coefficients were obtained $1.32{\times}10^{-4}{\sim}3.98{\times}10^{-4}cm^2/min$ and $1.80{\times}10^{-4}{\sim}2.28{\times}10^{-4}cm^2/min$, respectively.

• 한국산업융합학회 논문집
• /
• 제4권1호
• /
• pp.77-85
• /
• 2001

This paper was to investigate the preparation of polysulfone(PS), polyethersulfone(PES) and polyphenylsulfone(PPS) membrane. The thermal property of PPS was higher than that of others. From the result of SEM, the concentration of polymer was found to have a significant effect on the structure of membrane, and the structure of membrane made of PES is found to have regular micell form of asymmetry. Permeability and selectivity for oxygen and nitrogen gas in the air were analyzed by GC. Permeabilities of the membrane made of PES for oxygen and nitrogen in air, 1.5 and $0.7(x10^9[cm^3(STP)cm/cm^2seccmHg]) $, respectively was higher than that of others. and Selectivity of the membrane made of PPS for oxygen to nitrogen gas in air was 2.9.

• Membrane and Water Treatment
• /
• 제8권6호
• /
• pp.591-612
• /
• 2017

Increase in the hydrophilicity (HPCT) of polysulfone (PS) membrane and subsequently decrease in fouling can be achieved by surface modification of PS based membranes. Therefore, in this work, ultrafiltration membranes with increased HPCT were prepared using the enantiomeric tartaric acid (D-TA) and racemic tartaric acid (DL-TA). Phase inversion technique was used for the preparation of polyethylene glycol and TA blended PS membrane. Morphological analysis of the fabricated membranes was done by scanning electron microscope and atomic force microscopy. Bovine serum albumin (BSA) solution was taken for finding the permeation and rejection behavior of prepared membranes. Maximum BSA rejection was increased by 70.5% for the modified membrane.

• 한국환경과학회지
• /
• 제25권12호
• /
• pp.1623-1632
• /
• 2016

Zeolite (FZ) prepared using coal fly ash from an Ulsan industrial complex was immobilized with polysulfone (PS) to fabricate PS-FZ beads. The prepared PS-FZ beads were characterized by scanning electron microscopy and Fourier transform infrared spectroscopy. The optimum ratio for preparing PS-FZ beads was 1 g of PS to 2 g of FZ. The removal efficiencies of Sr and Cu ions by the PS-FZ beads increased as the solution pH increased and nearly reached a plateau at pH 4. A pseudo-second-order model morel fit the adsorption kinetics of both ions by the PS-FZ beads better than a pseudo-first-order model. The Langmuir isotherm model fit the equilibrium data well. The maximum adsorption capacities calculated from the Langmuir isotherm model were 46.73 mg/g and 62.54 mg/g for the Sr and Cu ions, respectively. Additionally, the values of thermodynamic parameters such as free energy (${\Delta}G^{\circ}$), enthalpy (${\Delta}H^{\circ}$) and entropy (${\Delta}S^{\circ}$) were determined. The results implied that the prepared PS-FZ beads could be interesting an alternative material for Sr and Cu ion removal.

• 한국환경과학회지
• /
• 제24권3호
• /
• pp.267-274
• /
• 2015

The feasibility of PS-D2EHPA/TBP beads prepared by immobilizing two extractants D2EHPA and TBP in polysulfone to remove Sr(II) from aqueous solution was investigated in batch system. Batch experiments were carried out to study equilibrium isotherms, kinetics, and thermodynamics. Equilibrium data were fitted using Langmuir, Freundlich, Redlich-Peterson, and Dubinin-Radushkevich equation models at temperatures of 298 K, 313 K, and 328 K. The removal capacity of Sr(II) by PS-D2EHPA/TBP beads obtained from Langmuir model was 2.41 mg/g at 298 K. The experimental data were well represented by pseudo-second-order model. The removal process of Sr(II) by PS-D2EHPA/TBP beads prepared in this study was found to be feasible, endothermic, and spontaneous.

• Korean Membrane Journal
• /
• 제4권1호
• /
• pp.20-24
• /
• 2002

The surface of polysulfone membranes has been modified using the fluorine chemicals, ITFE (2-iodo-1,1,1-trifluoro-ethane F.W.=209.94) and PFPI (1H,1H-pentafluoro-n-propyl iodide F.W.=259.95), and PFI (1H,1H,2H,2H-perfluorohexyl iodide, F.W.=373.99) based on Friedel-Crafts reaction mechanism with varying reaction temperatures, reaction time, and catalysis types. The resulting membranes were characterized through mainly the contact angle measurement and pure water permeability. The smaller reactant shows the larger contact angles. FeBr$_3$ catalyst is more effective than AlCl$_3$. Typically, the PS film treated with ITFE at $25^{\circ}C$ under FeBr$_3$ catalyst showed the contact angle 78.5$^{\circ}C$ which indicated 10% over the value of unreacted PS films. More than 50% of pure water flux 8.0 g/$m^2$hr, reduced at reaction time 10 min relative to the original flux, 3.49 g/$m^2$hr.