• 제목/요약/키워드: Polypropylene solution

검색결과 98건 처리시간 0.025초

이미노디아세트산을 함유한 섬유상 흡착제 제조 및 코발트, 철, 납 이온 흡착특성 (Preparation of Fibrous Adsorbent Modified with Iminodiacetic Acid and Its Co2+, Fe2+, and Pb2+ Adsorption Characteristics)

  • 양현수;최준규;노영창
    • 공업화학
    • /
    • 제10권3호
    • /
    • pp.477-485
    • /
    • 1999
  • 방사선 전조사법에 의하여 폴리프로필렌 부직포 상에 2,3-에폭시프로필메타크릴레이트 (GMA)를 공중합시킨 후 다양한 혼합용매 상에서 이미노디아세트산 (IDA)과 반응시킴으로서 고성능의 섬유상 금속 흡착제를 제조하였다. 그라프트 반응시의 그라프트율은 반응시간과 반응온도, 총 조사선량 및 선량율에 의존하는 것으로 나타났다. GMA가 그라프트된 폴리프로필렌 부직포 상에 이미노디아세트산을 도입하는 아민화반응에 있어서 다양한 혼합용매가 반응성에 미치는 영향을 고찰한 결과 디메틸술폭시드 (DMSO)와 물을 적정비율로 혼합한 혼합용매 상에서 가장 높은 반응성을 가지는 것으로 나타났으며, 물만을 사용하는 경우 아민화반응은 전혀 진행되지 않았다. 이온농도 100 ppm으로 조재된 중금속 용액에 제조된 아민화 흡착제를 일정시간 담그어 금속이온에 대한 흡착성능을 살펴보았는데, 각각의 경우에 대하여 흡착효율을 다음의 순서를 따랐다: 납>코발트>철.

  • PDF

Osmotic membrane distillation with continuous regeneration of stripping solution by natural evaporation

  • Gryta, Marek
    • Membrane and Water Treatment
    • /
    • 제4권4호
    • /
    • pp.223-236
    • /
    • 2013
  • The paper presents an experimental set-up for osmotic membrane distillation, which can be operated continuously for several weeks. NaCl solutions were used as an osmotic solution. The influence of osmotic solution concentration on the obtained permeate flux is presented. The experimental set-up was equipped with a system for the regeneration of dilute brine. The regeneration was carried out using a method of natural evaporation to the air surrounding the installation. The evaporation area was created by the Białecki rings, assembled in the form of tower. The obtained evaporation rate was sufficient to maintain a constant NaCl concentration (over 300 g/L), for air with the relative humidity in the range of 30-80%. Accurel PP S6/2 hydrophobic polypropylene membranes were used in the study. The membranes exhibited 100% rejection for 600 h of the process duration.

자몽종자추출물과 은이온 용액이 숙주나물의 저장품질에 미치는 영향 (Effects of Grapefruit Seed Extract and An ion Solution on Keeping Quality of Mungbean Sprouts)

  • 조숙현;허재영;최용조;강진호;조성환
    • 한국식품저장유통학회지
    • /
    • 제12권6호
    • /
    • pp.534-539
    • /
    • 2005
  • 항균효과가 있는 자몽종자추출물과 은이온 용액을 이용하여 숙주나물의 유통 중 신선도 연장을 위하여 $30\;{\mu}m$ polypropylene(PP)필름에 숙주나물 200 g을 침지하지 않은 처리를 대조구로 하여 은이온 용액, GFSE 50 ppm 및 100 ppm 처리, 은이온 용액에 GFSE 50 ppm 및 100 ppm 처리를 하여 밀봉 포장한 후 냉장 온도인 $5^{\circ}C$에 저장하면서 실험한 결과이다. 저장 6일째 포장내 이산화탄소와 산소농도를 보면, 이산화탄소농도는 $4.2\~5.3\%$의 농도를 나타내었고, 산소농도는 $1.0\~1.1\%$농도를 나타내었다. 중량감소율은 모든 처리에서 $1.0\%$ 내외의 감소율을 보여, 중량 감소율에서는 큰 차이를 보이지 않았다. 경도는 모든 처리에서 저장 4일 이후에 낮아지는 경향이었고, 색도변화는 자엽과 배축 부분의 경우 저장4일째까지 모두 큰 차이를 보이지 않았고, 저장 6일째의 경우 자엽부분에서 갈변이 심하였다. 저장 중 숙주나물의 비타민C함량의 경우 침지를 하지 않은 처리(대조구)에서 비타민C 함량이 가장 낮은 반면, 다른 모든 처리에서 저장 기간동안 비타민C함량이 서서히 낮아져서 지연되는 효과를 나타내었다. 미생물변화에서는 총균수의 경우 대조구에 비해 자몽종자추출물과 은이온 용액에서 미생물의 증식이 억제됨을 알 수 있었고, 황색포도상구균의 경우 은이온 용액과 은이온 용액에 GFSE 100 ppm을 첨가한 처리에서는 저장 기간동안 전혀 검출이 되지 않았으며, 효모수는 저장기간에 따라 점차 증가하는 대조구와 달리 자몽종자추출물과 은이온 용액에서 효모의 증식이 억제됨을 알 수 있었다. 따라서 대조구의 상품성 유지기간이 2일인데 반해, GFSE 100 ppm처리와 은이온 용액에 GFSE 100 ppm 농도로 처리한 것이 6일로 4일정도의 신선도 연장과 함께 상품성이 있으므로 유통 시 미생물을 억제시킬 수 있고, 항균효과가 있는 세척수를 이용하는 것도 저장기간 연장과 함께 신선도 유지에 있어서 도움이 될 수 있다.

탄소섬유 한외여과막 및 광촉매 코팅 폴리프로필렌 구의 혼성 수처리: 물 역세척 시 유기물의 영향 (Hybrid Water Treatment of Carbon Fiber Ultrafiltration Membrane and Polypropylene Beads Coated Photocatalyst: Effect of Organic Materials in Water Back-flushing)

  • 박진용;김미향
    • 멤브레인
    • /
    • 제22권6호
    • /
    • pp.415-423
    • /
    • 2012
  • 탄소섬유 한외여과막 및 광촉매 혼성 수처리를 위해 관형 여과막 외부와 원통형 막 모듈 내부 사이 공간에 광촉매를 충전하였다. 광촉매는 PP (polypropylene) 구에 이산화티타늄 분말을 플라즈마 화학증착 공정으로 코팅한 것이다. 휴믹산과 카올린 모사용액을 대상으로 막오염을 최소화하기 위해 10분 주기로 10초 동안 물 역세척을 시행하였다. 기존 결과와 동일하게 휴믹산을 10 mg/L부터 2 mg/L로 변화시킴에 따라, 막오염에 의한 저항 ($R_f$)이 감소하여 2 mg/L에서 최대 총여과부피 ($V_T$)를 얻었다. 탁도와 휴믹산의 처리효율은 각각 97.1%와 74.2% 이상으로 휴믹산 농도의 영향을 받지 않았다. 그러나 기존 결과에서는 휴믹산의 농도가 증가할수록 휴믹산의 처리효율이 다소 증가하는 경향을 나타냈다.

Surface Modification of Polypropylene Membrane by ${\gamma}$ Irradiation Methods and their Solutes Permeation Behaviors

  • Shim, J. K.;Lee, S. H.;Kwon, O. H.;Lee, Y. M.;Nho, Y. C.
    • 한국막학회:학술대회논문집
    • /
    • 한국막학회 1998년도 춘계 총회 및 학술발표회
    • /
    • pp.99-101
    • /
    • 1998
  • 1. Introduction : The conventional grafting polymerization technique requires chemically reactive groups on the surface as well as on the polymer chains. For this reason, a series of prefunctionalization steps are necessary for covalent grafting. The surface prefunctionalizational technique for grafting can be used to ionization radiation, UV, plasma, ion beam or chemical initiators. Of these techniques, radiation method is one of the useful methods because of uniform and rapid creation of active radical sites without catalytic contamination in grafted samples. If the diffusion of monomer into polymer is large enough to come to the inside of polymer substrate, a homogeneous and uniform grafting reaction can be carried out throughout the whole polymer substrate. Radiation-induced grafting method may attach specific functional moieties to a polymeric substrate, such as preirradiation and simultaneous irradiation. The former is irradiated at backbone polymer in vacuum or nitrogen gas and air, and then subsequent monomer grafting by trapped or peroxy radicals, while the latter is irradiated at backbone polymer in the presence of the monomer. Therefore, radiation-induced polymerization can be used to modification of the chemical and physical properties of the polymeric materials and has attracted considerable interest because it imparts desirable properties such as blood compatibility. membrane quality, ion excahnge, dyeability, protein adsorption, and immobilization of bioactive materials. Synthesizing biocompatible materials by radiation method such as preirradiation or simultaneous irradiation has often used $\gamma$-rays to graft hydrophilic monomers onto hydrophobic polymer substrates. In this work, in attempt to produce surfaces that show low levels of anti-fouling of bovine serum albumin(BSA) solutions, hydroxyethyl methacrylate(HEMA) was grafted polypropylene membrane surfaces by preirradiation technique. The anti-fouling effect of the polypropylene membrane after grafting was examined by permeation BSA solution.

  • PDF

폴리프로필렌/기능화된 다중벽 탄소나노튜브 나노복합체 필름의 특성 연구 (Characterizations of Polypropylene/Functionalized Multiwalled Carbon Nanotube Films)

  • 고정호;김정철;장진해
    • 폴리머
    • /
    • 제33권4호
    • /
    • pp.333-341
    • /
    • 2009
  • 폴리프로필렌(PP)/기능화된 다중벽 탄소나노튜브(F-MWNT)나노복합체를 용액 삽입법을 이용해서 제조하였다. 두 종류의 F-MWNT인 dodecanol-MWNT(DDO-MWNT)와 dodecylamine-MWNT(DDA-MWNT)를 포함하는 PP 복합체 필름의 열적, 기계적 성질, 모폴로지, 전기전도도, 필름의 투명도 및 개스투과도 등을 조사하고 그 물성을 구조가 다른 F-MWNT에 따라 서로 비교하였다. 전자 현미경(SEM과 TEM) 사진을 통하여 일부의 MWNT는 잘 분간이 되었으나 그렇지 않은 부분도 확인하였다. 적은 양의 F-MWNT가 첨가되어도 PP 복합체 필름의 열적 기계적 물성이 향상되었으며, 2 wt%에서 최대값을 보여주었다. 일반적으로 PP 복합체 필름의 초기 탄성율과 광학 투명도에서 DDO-MWNT가 DDA-MWNT 보다 더 효과적이었나.

친수성 포스파젠 고분자를 이용한 금속 이온 분리막 제조에 관한 연구 (A Study on the Preparation of Metal-Ion Separation Membrane with Hydrophilic Polyphosphazenes)

  • 권석기;이병철
    • 공업화학
    • /
    • 제10권3호
    • /
    • pp.445-449
    • /
    • 1999
  • 소수성인 poly[bis(trifluoroethoxy)phosphazene]에 methoxyethylenoxy 측쇄를 치환시켜 친수성을 증가시킨 포스파젠 고분자를 합성하였으며 합성된 고분자를 다공성 polypropylene 지지체위에 dip-coating법으로 금속이온 분리막을 제조하였다. $Cr^{3+},\;Co^{2+},\;Mn^{2-}$이온 수용액에 대한 분리실험을 $25^{\circ}C$에서 $60^{\circ}C$까지 온도범위에서 행하였다. 치환된 methoxyethylenoxy기 중의 ethylenoxy의 반복단위가 증가할수록 이온의 투과특성이 증가하는 것을 알수 있었다. Trifluoroethoxy methoxyethoxyethoxyethoxy co-substituted polyphosphazene의 경우 $Cr^{3-}$ 이온이 $60^{\circ}C$에서 분리계수 4.5의 값을 갖고 $Co^{2+},\;Mn^{2+}$ 이온들로부터 분리가 됨을 알 수 있었다.

  • PDF

Poly(vinylbenzyl ammonium salt)를 이용한 Pore-filled 이온교환막의 제조 (Preparation of Pore-filled Ion-exchange Membranes using Poly(vinylbenzyl ammoninum salt))

  • 변홍식
    • 멤브레인
    • /
    • 제11권3호
    • /
    • pp.109-115
    • /
    • 2001
  • Polypropylene(PP)을 지지막으로 하여 in-situ 가교결합(cross-linking)방식을 이용한 pore-filled 이온교환막을 제조하였다. 다공성 PP막의 기공에 poly(vinylbenzyl chloride)(PVBCI)과 piperazine(PIP), 또는 1,4-diaminobicyclo [2,2,2]octane(DABCO)을 dimethylforamid(DMF)에 녹인 용액을 채워서 겔화시킨 후, 남아있는 chloromethyl 그룹에 trimethylamine을 이용하여 양이온인 암모니움 site를 형성시키면 pore-filled 음이온교환막이 형성된다. 이와 같은 2단계의 제조방식으로 제조된 pore-filled 분리막은 크기의 변화가 없이 안정되며, PVBCI의 농도와 가교제의 농도로써 고분자-겔의 함량(mass gain, MG)과 가교도가 간단하게 조절되는 것을 보여주었다. 특히 아주 낮은 압력(100 kPa)에서의 높은 수투과도(7.9kg/$m^2$hr, 지지막은 PP3, 73%의 MG, 10%의 가교도, PIP 가교제사용)는 연수용 분리막으로 충분히 활용될 수 있음을 보여준다.

  • PDF

Synthesis of arsenic adsorbent using graft polymerization

  • SEKO Noriaki;TAMADA Hasao
    • 한국막학회:학술대회논문집
    • /
    • 한국막학회 2004년도 추계 총회 및 학술발표회
    • /
    • pp.199-203
    • /
    • 2004
  • Fibrous arsenic (As) adsorbent was synthesized by loading zirconium (Zr) on fibrous phosphoric adsorbent that was directly synthesized by radiation-induced graft polymerization of 2-hydroxyethyl methacrylate phosphoric acid on polyethylene-coated polypropylene nonwoven fabric. Zirconium reacted with phosphoric acid grafted in the polyethylene layer. Zirconium density of the resulting adsorbent was 4.1 mmol/g. The breakthrough curve of As(V) adsorption was independent of the flow rate up to $1300\;h^{-1}$ in space velocity. The total capacity of As(V) was 2.0 mmol/g-adsorbent at pH of 2. The adsorbed Zr(IV) could be evaluated by 0.4 M sodium hydroxide solution because negligible Zr(IV) could be found in the eluted solution.

  • PDF

Permeability of pH-sensitive membranes grafted by Fenton-type reaction: An experimental and modeling study

  • Gac, Jakub M.;Bojarska, Marta;Stepniewska, Izabela;Piatkiewicz, Wojciech;Gradon, Leon
    • Membrane and Water Treatment
    • /
    • 제6권5호
    • /
    • pp.411-422
    • /
    • 2015
  • Membrane modification by different concentrations of acrylic acid has been described. Grafting of acrylic acid to the surface of a polypropylene membrane was obtained by a Fenton-type reaction. Membrane permeability seemed to have been dependent on the value of pH in the solution. To explain tendency, a simple theoretical model was developed. The model incorporates explicitly statistical conformations of a polyacid chain grafted onto the pore surface. The charged capillary model with a varying diameter for porous membranes was then used to evaluate the permeability of the membrane. It has been shown both theoretically and experimentally that the permeability of a grafted membrane depends on the pH of the solution.