• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.147-150
• /
• 2002

A light guide panel is an element of the LCD backlight module that is often used for the display of compact electronic devices. In this study, a laser marking system is proposed to fabricate light guide panel, which can be replaced of other manufacturing methods such as silk printing, stamping, and v-cutting methods. The objectives of this research are the establishment of laser marking system, evaluation of laser marking parameters, understanding marking process, application to PMMA, reliability test and quality inspection. A 50W $CO_2$ laser (CW) was used to perform different experiments in which, the influence of some processing parameters (average power, scanning speed) on the geometry and quality of groove pattern was studied. The width of the etched grooves increases with increasing a laser power and decreasing a scan speed. In order to analyze surface characteristics and optical properties (luminance, uniformity), SEM photography and BM7 (luminance measuring system) were used. As a result, the optimal conditions of the process parameters were determined.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1364-1365
• /
• 2006

본 논문에서는 두께 0.25 mm의 알루미늄 포일 (foil)을 이용해 나노기공 알루미나 주형을 만들었다. 우선 알루미늄 포일 표면의 유기물을 제거한 후, 전해연마 방법을 이용하여 표면을 매끄럽게 하였다. 또, 양극산화를 통해 알루미늄 표면에 나노기공을 형성하였다. 나노기공 알루미나($Al_{2}O_{3}$) 주형 위에 Polymethyl methacrylate (PMMA)를 얇게 도포하여 나노기공 사이로 침투시킨 후 주형을 제거하여 나노기둥인 PMMA를 얻었다. 이것을 나노임프린트 리소그라피 기법을 이용하여 태양전지의 N-type 물질로 맏이 사용되는 티타니아 ($TiO_2$)의 면적을 넓게 할 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.2093-2095
• /
• 2004

본 논문은 압전소자를 구동장치로 사용한 마이크로 펌프의 제작과 실험에 관한 논문이다. 마이크로 펌프의 상부기판은 polydimethyl siloxane(PDMS)을 소재로 미세유로에 상시 닫힌 밸브가 일체화된 구조로 제작되었고, 하부기판은 polymethyl methacrylate(PMMA)를 소재로 3개의 압전 디스크가 구동기로 부착되었다. 최종적으로 상, 하부 기판은 액상 PUMS로 접합하여 제작했다. 구동기의 입력신호는 6상으로 구형파를 인가하여 연동구동하며 주파수와 전압을 가변하면서 유량을 측정하였다. 구동 주파수가 0.167 Hz이고 전압이 20 V일 때, 마이크로펌프의 1회 토출량은 104 nl이고, 유량은 1.04${\mu}{\el}$/min이다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.61-62
• /
• 2011

본 논문에서는 top-contact 구조의 유기 박막 트랜지스터를 이용하여 정류기와 인버터를 제작하고 전기적 특성을 분석 하였다. 게이트 절연막으로는 PMMA (polymethyl methacrylate)를 사용하였고 유기물 활성층으로 pentacene을 진공 증착하여 사용하였다. 유기 박막 트랜지스터로 제작된 정류기는 약 3 V의 DC 전압을 얻어 39 %의 효율특성을 보였고, 인버터는 1.2의 이득값을 얻어 유기전자회로의 실용 가능성을 확인 하였다.

• 한국정밀공학회지
• /
• 제20권1호
• /
• pp.79-84
• /
• 2003

A light guide panel is an element of the LCD backlight module that is often used for the display of compact electronic devices. In this study, a laser marking system is proposed to fabricate light guide panel, which can replace other manufacturing methods such as silk printing, stamping, or v-cutting methods. The objective of this research is to evaluate the process parameters of the laser marking system. Light guide patterns were marked with a 50W $CO_2$ laser (CW) to understand the effects of average power and scanning speed on the geometry and quality of groove pattern. The width of the fabricated grooves increases with increasing laser power and decreasing scan speed. In order to analyze surface characteristics and optical properties (luminance, uniformity), SEM photography and BM7 (luminance measuring system) were used. As a result, the optimal conditions of the process parameters were determined.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1068_1069
• /
• 2009

$TiO_2$의 계면적을 넓힘으로써 태양전지의 특성을 향상시키기 위해 정렬도가 높은 나노 기공 (nanopore, NP) 이산화티타늄 ($TiO_2$)을 이용하여 복합 태양전지를 제작하였다. Polymethyl methacrylate (PMMA)를 사용한 nanoimprinting lithography (NIL) 기술을 이용하여 NP $TiO_2$를 제작하였으며. 광활성층으로는 poly(3-hexylthiophene) (P3HT)와 [6,6]-phenyl $C_{61}$ butyric acid methyl ester (PCBM)을 사용하였다. NP $TiO_2$를 이용한 태양전지의 전력변환효율이 1.49%로 표면이 고른 소자의 효율인 1.18%에 비해 26% 가량 증가하였다. 이와 같은 효율 향상의 원인은 $TiO_2$와 광활성층의 계면이 증가되어 전하의 생성과 분리가 용이해졌기 때문인 것으로 사료된다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.532-537
• /
• 2007

Nano imprint lithography(NIL) is a cost-efficient, high-throughput processing technique to transfer nano-scale patterns onto thin polymer films. Polymers used as the resist include UV cured resins as well as thermoplastics such as polymethyl-methacrylate(PMMA). In this study, an analytic investigation was performed for the NIL process of transferring nano scale patterns onto polymeric films. Process optimization calls for a thorough understanding of resist flow during the process. We carried out 2D and 3D numerical analyses of resist flow during NIL process. The simulation incorporated continuum-hypothesis and the effects of surface tension were taken into account. For a more effective prediction of free surface, fixed grid scheme with the volume of fluid (VOF) method were used. The simulation results were verified with experimental results qualitatively. And the parametric study was performed for various process conditions.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.555-556
• /
• 2006

In this paper, we have proposed a novel process using two-step electron beam lithography to fabricate 20 nm T-gates for high performance MODFETs. Two-step lithography reduces electron forward scattering by defining the foot on a thin (100 nm) bottom-layer of polymethyl methacrylate (PMMA) at the second step, the T-gate head having been developed at the first step. Adopting a low temperature development technique for the second step reduces the detrimental effect of head exposure on foot definition. We have shown that 20 nm T-gate can be patterned with this process.

• 반도체디스플레이기술학회지
• /
• 제12권3호
• /
• pp.35-39
• /
• 2013

In this paper, we developed an optical sheet for LED lighting with integrated $CO_2$ gas and temperature sensor which can monitor at the indoor environment. The optical sheet for LED lighting is fabricated through PMMA(Polymethyl methacrylate) injection process using mold. This research enables to fabricate the reflective sheet, light-guide plate and the prism sheet in a optical sheet. The fabricated sheet demonstrates higher intensity of optical efficiency compared with single-sided sheets. The $CO_2$ sensor was fabricated using NDIR(NON-Dispersive Infrared) method and it has $0.0235mV/V{\cdot}PPM$ sensitivity. The temperature sensor was fabricated using RTD(Resistance temperature detector) method and it has $0.563{\Omega}/^{\circ}C $sensitivity.

• The Journal of Advanced Prosthodontics
• /
• 제5권2호
• /
• pp.110-117
• /
• 2013

PURPOSE. Polymethyl methacrylate (PMMA) is the most commonly used denture base material despite typically low in strength. The purpose of this study was to improve the physical properties of the PMMA based denture base resins (QC-20, Dentsply Ltd., Addlestone, UK; Stellon, AD International Ltd, Dentsply, Switzerland; Acron MC; GC Lab Technologies Inc., Alsip, Japan) by copolymerization mechanism. MATERIALS AND METHODS. Control group specimens were prepared according to the manufacturer recommendations. In the copolymer groups; resins were prepared with 5%, 10%, 15% and 20% acrylamide (AAm) (Merck, Hohenbrunn, Germany) content according to the moleculer weight ratio, respectively. Chemical structure was characterized by a Bruker Vertex-70 Fourier transform infrared spectroscopy (FTIR) (Bruker Optics Inc., Ettlingen, Germany). Hardness was determined using an universal hardness tester (Struers Duramin, Struers A/S, Ballerup, Denmark) equipped with a Vickers diamond penetrator. The glass transition temperature ($T_g$) of control and copolymers were evaluated by Perkin Elmer Diamond DSC (Perkin Elmer, Massachusetts,USA). Statistical analyses were carried out using the statistical package SPSS for Windows, version 15.0 (SPSS, Chicago, IL, USA). The results were tested regarding the normality of distribution with the Shapiro Wilk test. Data were analyzed using ANOVA with post-hoc Tukey test (P<.01). RESULTS. The copolymer synthesis was confirmed by FTIR spectroscopy. Glass transition temperature of the copolymer groups were higher than the control groups of the resins. The 10%, 15% and 20% copolymer groups of Stellon presented significantly higher than the control group in terms of hardness. 15% and 20% copolymer groups of Acron MC showed significantly higher hardness values when compared to the control group of the resin. Acrylamide addition did not affect the hardness of the QC-20 resin significantly. CONCLUSION. Within the limitation of this study, it can be concluded that copolymerization of PMMA with AAm increased the hardness value and glass transition temperature of PMMA denture base resins.