• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.143-146
• /
• 2002

Unsized AS-4 carbon fibers were etched by RF plasma and then coated via plasma polymerization in order to enhance adhesion to vinyl ester resin. The gases utilized for the plasma etching were Ar, $N_2 and O_2$, while the monomers used for the plasma polymerization coating were acetylene, butadiene and acrylonitrile. The conditions for the plasma etching and the plasma polymerization were optimized by measuring interfacial adhesion with vinyl ester resin via micro-droplet tests. Among the treatment conditions, the combination of Ar plasma etching and acetylene plasma polymerization provided greatly improved interfacial shear strength (IFSS) of 69MPa compared to 43MPa with as-received carbon fiber. Based on the SEM analysis of failure surface and load-displacement curve, it was assume that the failure might be occurred at the carbon fiber and plasma polymer coating. The plasma etched and plasma polymer coated carbon fibers were subjected to analysis with SEM, XPS, FT-IR or Alpha-Step, and dynamic contact angles and tensile strengths were also evaluated. Plasma polymer coatings did not change tensile strength and surface roughness of fibers, but decreased water contact angle except butadiene plasma polymer coating, possibly owing to the functional groups introduced, as evidenced by FT-IR and XPS.

• 한국전산유체공학회지
• /
• 제18권3호
• /
• pp.20-25
• /
• 2013

In various manufacturing industries, an in-mold decoration (IMD) process for plastic objects is widely utilized because a film forming and an injection molding processes run simultaneously. In the present study, the deformation of polymer film and filling of resin in the IMD process were numerically investigated to evaluate the quality of the plastic object formed by the IMD process, which consists of thermoforming and injection molding processes. To obtain the initial shape of the polymer film during the injection molding process, the deformation of the polymer film in the thermoforming process was pre-formed using the vacuum conditions to attach the film to a cavity. Since the properties and deformation of polymer film are greatly affected by the behavior of polymer resin being injected into a mold cavity, numerical simulations for the injection molding and film forming were performed with one-way coupling method. The results showed that the injected resin could lead to the tearing of the polymer film in local regions near the corners. In order to verify the proposed numerical methodology, the numerical results of the deformation patterns printed on the initial polymer film were compared with the experimental data. The proposed methodology to couple film forming analysis with injection molding analysis can be used to predict the deformation of film in IMD process.

• 콘크리트학회논문집
• /
• 제26권4호
• /
• pp.517-524
• /
• 2014

이 연구는 해양환경이나, 방사선 폐기물 및 가스 저장 시설과 같은 고내구성을 요하는 철근콘크리트 구조물의 내구성 향상 기법 및 장수명화 기술의 개발을 목적으로, 우수한 성능을 갖는 비스페놀 A형 및 F형 에폭시수지와 염화물 이온 흡착제인 아질산형 하이드로칼루마이트를 병용한 폴리머 시멘트 모르타르의 염화물이온 침투 저항성, 탄산화 저항성, 건조수축 및 철근부식 촉진시험을 통하여 내구성과 방청성을 비교 검토하는 것이다. 그 결과, 폴리머 결합재비에 관계없이 칼루마이트 치환에 의해 폴리머 시멘트 모르타르의 내구성이 일부 저하하는 경향을 보였으나, 이는 폴리머 결합재비의 증가와 함께 크게 개선되었다. 방청성의 경우 비스페놀 A형 및 F형 에폭시수지 사용으로 시멘트 매트릭스 내 생성된 폴리머 필름에 의한 이온 및 가스투과 저항성이 증대하였으며, 칼루마이트의 염화물이온 흡착과 아질산이온 방출에 의해 우수한 방청효과를 보였다. 이상의 연구 결과로부터 철근콘크리트의 고성능 다기능 폴리머 혼입 시멘트 모르타르 제품의 개발이 가능할 것으로 판단된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 추계학술대회 논문집
• /
• pp.205-206
• /
• 2006

• 접착 및 계면
• /
• 제3권1호
• /
• pp.20-23
• /
• 2002

The wetting properties of an uncured epoxy resin on both clean and oiled, galvanised steel have been studied. Since the polymer is very viscous at ambient temperature, and also with an aim to simulate industrial conditions, the spreading of drops of resin during a heating cycle (temperature increase at $10^{\circ}C/min$) was recorded and analysed. On clean steel, a contact angle, ${\theta}$, vs time, t, plot shows sigmoidal behaviour, whereas on the oiled substrate, spreading almost ceases in an intermediate stage. This strange behaviour is attributed to significant oil absorption by the polymer.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.769-774
• /
• 2002

In this study, methyl methacrylate (MMA)- modified polyester polymer concrete, in which the MMA was added to the unsaturated polyester resin, was developed for improving the early-age strength and the workability of the conventional polymer concrete, binder of which was the unsaturated polyester resin. Then the fundamental properties of the polymer concrete such as workability and strength were surveyed. The experimental results showed that the workability was remarkably improved as the MMA contents increased, and the filler-binder ratio was turned out to be important factor for the workability. Slump prediction equation was derived by the regression analysis based on MMA content and filler-binder ratio. Furthermore, early-age strength was greater when the MMA content were increased in the range of 20-40 % but the strength rather showed a tendency of decrease when the MMA content was 50 %.

• 한국생산제조학회지
• /
• 제19권1호
• /
• pp.140-144
• /
• 2010

In recent years there has been a growing interest for the use of natural fibers in composite applications due to their low cost, environmental friendliness, and good mechanical properties. The purpose of this study is to determine the characteristic of bending strength on bamboo fiber reinforced polymer composites. The parameters of RTM process depend on the weight ratio of bamboo fiber and resin, the number of bamboo ply and amount of hardening agent. Besides the existence of pore in composites according to vacuum time investigated a effect on mechanical properties of reinforced polymer composites. Test result shows that compressive strength was a maximum(approximately 1,840kgf/$cm^2$) value when weight ratio of resin was 12%.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.891-893
• /
• 1992

Polymers have good electrical properties as an insulation material. Though they show more and less poor resistance to heat, radiation, and oxygen, the poor properties have been overcame by developing new resin with the saturated molecular structure and compounding resin with resistive fillers. Polymer insulators have many advantages; light weight, good mechanical properties, better contaimination performance, low cost by mass productivity, no destruction in many pieces, good flexibility in design, short manufacturing time. Usage of polymer insulators has increased rapidly with good credit on long term properties in advanced nations and will continue to grow.

• 대한기계학회논문집A
• /
• 제30권8호
• /
• pp.916-922
• /
• 2006

In recent years there has been a growing interest for the use of natural fibers in composite applications due to their low cost, environmental friendliness, and good mechanical properties. The purpose of this study is to determine the characteristic of bending strength on bamboo fiber reinforced polymer composites. The parameters of RTM process depend on the weight ratio of bamboo fiber and resin, the number of bamboo ply and amount of hardening agent. Mechanical properties was investigated for each process factor of polymer composites. Test result shows that bending strength was a maximum(approximately 85MPa) value when composite thickness was 6mm and weight ratio of resin was 13%.

• 콘크리트학회논문집
• /
• 제17권3호
• /
• pp.329-334
• /
• 2005

폴리머콘크리트는 시멘트 콘크리트에 비해 강도와 내구적 성능 등 여러면에 있어 우수하여 건설현장에서의 벽체용 패널, 통신용 맨흘, 기계설비의 기초, 지하연결박스 등 다양한 용도로 개발되고 사용되어지고 있다. 그러나 폴리머콘크리트는 그 결합재로 쓰이고 있는 수지의 비용이 높아 경제적인 면에서 불리하여 기존 수지를 대체할 수 있는 결합재에 관한 연구가 필요하다. 여기서, PET를 재활용한 폴리머콘크리트는 산업폐기물을 재활용한 것이므로 경제적인 건설 소재가 될 수 있으며, 친환경적인 효과를 가져올 수 있기 때문에 현재 연구가 활발하게 이루어지고, 사용 영역이 확대 될 것으로 전망된다. 하지만 아직까지 PET재활용 폴리머콘크리트의 응력-변형률 거동에 관해서는 기초적인 연구상태에 있다. 따라서, 본 연구에서는 폐 PET를 합성한 불포화 폴리에스터 수지를 폴리머콘크리트의 결합재로 이용하여 콘크리트를 제조하였으며, 수지량, 골재의 최대치수, 양생방법에 변화를 주었다. 그리고 변위제어가 가능한 M.T.S 장비를 사용하여 응력-변형률 곡선을 관찰하였다. 그 결과 PET 재활용 폴리머콘크리트의 압축강도는 수지의 함량, 굵은골재의 크기변화, 양생방법에 모두 영향을 받는 것으로 나타났다. 탄성계수의 변화는 수지의 함량이 크게 좌우하였으며, 굵은골재의 최대치수와 양생방법에서 크게 영향을 받지 않았다. 최대응력에서의 변형률은 수지의 함량과 굵은골재의 최대치수에 영향을 많이 받는 것으로 나타났다.