• Polymer Science and Technology
• /
• v.2 no.2
• /
• pp.88-98
• /
• 1991

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.174-174
• /
• 2006

• Composites Research
• /
• v.29 no.6
• /
• pp.395-400
• /
• 2016

Recently, many research groups have studied on the epoxy-based multifunctional electrolyte to develop the structural composite bearing high mechanical properties without sacrificing the ionic conductivity at the same time. The studies on the optimal content and material selection for structural electrolyte have been published, while its curing behavior has not much analyzed yet. In this study, epoxy-based structural electrolyte containing solid electrolyte was prepared by varying the curing temperature and time. In addition, the ionic conductivities and mechanical properties of specimens were measured. We also find out the optimal hardening condition where the epoxy domain enables to be hardened within the range of temperature at which the thermal decomposition of electrolyte does not occur. Finally, we propose the multifunctional structural electrolyte showing achievable electrical and mechanical properties (282 MPa and $9{\times}10^{-6}S/cm@25^{\circ}C$).

• Membrane Journal
• /
• v.20 no.1
• /
• pp.13-20
• /
• 2010

Using poly(ethylene oxide) (PEO) as a polymer host, poly(ethylene glycol) (PEG) as a plasticizer, potassium iodide and iodine as sources of $I^-/{I_3}^-$ PEO-PEG-KI/$I_2$ polymer gel electrolytes were prepared. Based on the polymer gel electrolytes, solid-state dye-sensitized solar cell(DSSC)s were fabricated. The content of PEG in the electrolyte was changed from 0 to 85%. The electrolyte showed self-supporting form through whole range of the PEG content. As the PEG content increased, the ionic conductivity and ${I_3}^-$ diffusivity increased and the light-to electrical energy conversion efficiency increased under irradiation of 100 $mWcm^{-2}$ simulated sunlight.

• Transactions of the Korean hydrogen and new energy society
• /
• v.29 no.1
• /
• pp.111-116
• /
• 2018

The environmental impacts of a 1 kW polymer electrolyte membrane fuel cell (PEMFC) system are quantitatively assessed by performing a Life Cycle Assessment (LCA) study. A PEMFC system produces electricity and heat simultaneously, so an appropriate allocation of associated inputs and outputs is performed between the electricity and heat produced. The environmental impacts of the PEMFC system on the impact categories such as global warming (GW), abiotic depletion (AD), acidification (AC), and eutrophication (EU) are assessed from the life cycle impact assessment. The impact indicator results of the impact assessment on these impact categories are obtained as $3.70E-01kg\;CO_2\;eq./kWh$, 1.86E-03 kg Sb eq./kWh, $4.09E-04kg\;SO_2\;eq./kWh$, and $1.88E-05kg\;PO_4{^{3-}}/kWh$, respectively. For all impact categories studied the most influential stage is the operation stage, which accounts for 98.8%, 98.7%, 70.3%, and 62.3% of the total impact on GW, AD, AC, and EU, respectively. For the impact categories of AD, AC, and EU, most of the environmental impacts during the operation stage is attributed to the production of city gas. However, for the impact category of GW, $CO_2$ emission from the reforming process of city gas is the main reason for the largest contribution of the operation stage to the total impact results.

• Journal of the Korean Electrochemical Society
• /
• v.19 no.1
• /
• pp.9-13
• /
• 2016

Electrospun poly(ether sulfone) (PES) membrane impregnated with Nafion (PES-N) have been developed for high-temperature polymer-electrolyte membrane fuel cell (HT-PEMFC). The PES-N obtains highly thermal stability up to $430^{\circ}C$, which is higher than that of the commercial Nafion 212. The PES-N membrane shows a good proton conductivity of about $10^{-2}S\;cm^{-1}$ in a temperature range from $75^{\circ}C$ to $120^{\circ}C$. The membrane-electrode assembly (MEA) with the PES-N membrane exhibits a current density of $1.697A\;cm^{-2}$ at $75^{\circ}C$, and $0.813A\;cm^{-2}$ at $110^{\circ}C$ when the applied voltage is 0.6 V, whereas the MEA with the Nafion 212 membrane shows the current density of $0.647Acm^{-2}$ at $110^{\circ}C$. The results suggest that the PES-N can be a good candidate for a polymer electrolyte membrane of the HT-PEMFC.

• Transactions of the Korean hydrogen and new energy society
• /
• v.32 no.4
• /
• pp.245-255
• /
• 2021

Various studies about metallic bipolar plates have been conducted to improve fuel cell performance through flow field design optimization. These research works have been mainly focused on fuel cells for vehicle, but not fuel cells for building. In order to reduce the price and volume of fuel cell stacks for building, it is necessary to apply a metallic flow field, In this study, for a metallic flow field applied to a fuel cell for building, the effect of a change in the flow field shape on the performance of a polymer electrolyte membrane fuel cell was confirmed using a model and experiments with a down-sizing single cell. As a result, the flow field using a metal foam outperforms the channel type flow field because it has higher internal differential pressure and higher reactants velocity in gas diffusion layer, resulting in higher water removal and higher oxygen concentration in the catalyst layer than the channel type flow field. This study is expected to contribute to providing basic data for selecting the optimal flow field for the full stack of polymer electrolyte membrane fuel cells for buildings.

• Macromolecular Research
• /
• v.17 no.10
• /
• pp.725-728
• /
• 2009

• Membrane Journal
• /
• v.21 no.3
• /
• pp.213-221
• /
• 2011

Using poly(ethylene oxide) (PEO) as a polymer host, poly(ethylene glycol) (PEG) as a plasticizer, potassium iodide and iodine as sources of $I^-/I_3^-$, polymer electrolyte membranes were prepared. Based on the polymer electrolytes, solid-state dye-sensitized solar cell (DSSC)s were fabricated. The content of PEG in the electrolyte was controlled to be 95%. The mole number of KI per 1 mole of EO ([KI]/[EO] ratio) in the electrolyte was changed to be 0.022, 0.044, 0.066 and 0.088. The electrolyte membrane showed wax phase in ambient temperature. The ionic conductivity increased with increasing KI content to reach the maximum value at which [KI]/[EO] ratio is 0.066. After the maximum value, the ionic conductivity decreased with increasing KI content. In the case of DSSC, the Voc decreased continuously with increasing KI content in the polymeric electrolyte membrane. The $J_{SC}$ increased with increasing KI content to show maximum value at which [KI]/[EO] ratio is 0.044. In the higher KI content region, $J_{SC}$ value decreased with increasing KI content.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.75.2-75.2
• /
• 2010

Polymer electrolyte fuel cells (PEFCs) have received a lot of attention as a power source for both stationary and mobile applications due to their attractive feature. In general, the performance of PEFCs is highly affected by the property of the electrodes. A PEFC electrode essentially consists of a gas diffusion layer and a catalyst layer. The gas difusion layer is highly porous and hydrophobicized with PTFE polymer. The catalyst layer usually contains electrocatalyst, proton conducting polymer, even PTFE as additive. Particularly, the proton conducting ionomer helps to increase the catalytic activity at three-phase boundary and catalyst utilization. Futhermore, it helps to retain moisture, resulting in preventing the electrodes from membrane dehydration. The most widely used proton conducting ionomer is perfluorinated sulfonic acid polymer, namely, Nafion from DuPont due to its high proton conductivity and good mechanical property. However, there are great demands for alternative ionomers based on non-fluorinated materials in terms of high temperature availability, environmental adaptability and production cost. In this study, the electrodes with the various content of the sulfonated poly(ether sulfone) ionomer in the catalyst layer were prepared. In addition, we evaluated electrochemical properties of the prepared electrodes containing the various amount of the ionomers by using the cyclic voltammetry and impedance spectroscopy to find an optimal ionomer composition in the catalyst layer.