• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.445-448
• /
• 2003

Polymer concrete using wastes PET recycled resin that is, in general, more excellent mechanical properties than portland cement concrete. A lot of works are carried out about short-term properties of polymer concrete, however, little work has done to define their long-term properties, that is, sustain load such as creep. In this study will show the data that can long-term behavior of polymer concrete by short term creep test of polymer concrete that was affect to the temperature and the time to predict to long-term creep behavior. Then prediction equation was similar tendency that was comparing to short-term creep test and long-term creep test.

• 콘크리트학회지
• /
• 제8권5호
• /
• pp.135-143
• /
• 1996

콘크리트 및 모르터중의 수분의 확산 거동은 탄성계수, 크리프, 건축수축 등의 역학적 성질에 큰 영향을 미친다. 일반적으로 건조과정에서 폴리머 시멘트 콘크리트와 모르터의 수분의 증발에 의한 중량감소는 내부의 폴리머 필름형성에 의한 보수효과로 보통 시멘트 콘크리트 및 모르터에 비해 월등히 적다. 본 연구는 폴리머 시멘트 모르터 내부의 수분의 확산 과정을 확인하기 위하여 3종류의 폴리머디스퍼션과 에폭시 수지를 사용한 폴리머 시멘트 모르터를 제조하여 건조조건에 따른 수분의 확산 정도를 확산계수로 평가하였다. 실험결과, 폴리머 시멘트 모르터의 수분확산은 보통 시멘트 모르터에 비하여 아주 적었으며 폴리머 시멘트비에 따라 감소하였다.

• 콘크리트학회지
• /
• 제10권6호
• /
• pp.213-222
• /
• 1998

투수성 폴리머 콘크리트의 공극에 오염물질의 침투로 내구성 및 투수성능이 저하될 수있어 각종 필터용 폴리머 모르터를 그 위에 타설한 후, 압축강도, 휨강도 및 인장접착강도의 역학적 성질과 경화수축 및 투수성능을 실험을 실시하였다. 실험결과, 투수성 콘크리트의 압축강도의 증가와 함께 투수계수는 낮아졌으며, 충진재-결합재비의 증가에 따라 강도의 증가는 현저하였다. 투수성 폴리머 콘크리트의 압축강도와 투수계수는 9.4 MPa~1.93cm/s범위로서 배합에 따른 영향이 크게 나타났다. 필터용 폴리머 모르터를 타설한 투수성 폴리머 콘크리트의 역학적 성질은 쇄석을 필터로 사용하였을 때 가장 우수하였으며, 투수성 폴리머 콘크리트의 경화수축은 필터와 베이스 콘크리트 사이의 접착력에 영향을 크게 받음을 알 수 있었다. 본 연구결과, 투수성 폴리머 콘크리트의 각 배합조건에 따른 경제성과 성능면에서 균형을 이룰 수 있는 최적배합비를 제안할 수 있었으며 투수성 폴리머 콘크리트의 제작과응용면에 필요한 기초자료를 얻을 수 있었다.

• 한국산학기술학회논문지
• /
• 제20권7호
• /
• pp.265-271
• /
• 2019

본 논문의 목적은 기존의 에틸렌기반 폴리머 사용 배합인 투수 콘크리트 단점을 개선하고자, 아크릴 폴리머를 적용함으로써 개선된 도로 포장 재료로써 활용하기 위한 기초자료를 제시하고 한다. 기존의 에틸렌 폴리머 기반 투수 콘크리트 재료를 선정하고, 아크릴 폴리머를 혼입하여 배합 설계하여 비교 평가하였다. 시험결과, 기존 에틸렌 기반 폴리머 투수 콘크리트 배합 경우 큰 공극률이 발생하여 압축강도 증진이 미약한 결과를 나타냈었고, 아크릴 폴리머 기반 투수 콘크리트 배합 경우 KS에서 규정하고 있는 차도용 28일 압축강도 24MPa을 만족하였다. 휨강도인 경우, 아크릴 폴리머 기반 투수 콘크리트 배합 강도가 우수하였으며, 투수 계수는 모든 변수에서 기준인 0.1(mm/s) 이상으로 측정되었다. 흡수율의 경우 모든 변수에서 1% 이하로 측정되었고, 동탄성계수 측정결과, 아크릴 폴리머배합특성의 경우 120 Cycle 이상 측정을 유지할 수 있었고, 다른 배합의 경우 80 Cycle 이상 유지하지 못하였다. 따라서 기존의 에틸렌 폴리머 기반보다 아크릴 폴리머를 적용함으로써, 내구성 향상에 효과적인 것으로 판단된다.

• 한국농공학회지
• /
• 제42권
• /
• pp.78-84
• /
• 2000

Permeable polymer concrete can be applied to roads, sidewalks, river embankment, drain pipes, conduits, retaining walls, yards, parking lots, plazas, interlocking blocks, etc. This study is to explore a possibility of utilizing industrial by-products, a blast furnace slag and a fly ash, as fillers for permeable polymer concrete. Different mixing proportions are tried to find an optimum mixing proportion of permeable polymer concrete. The tests are carried out at 20$\pm$1$^{\circ}C$ and 60$\pm$2$^{\circ}C$ relative humidity. At 7 days of curing, compressive, flexural and splitting tensile strengths and water permeability ranged between 239~285kgf/$\textrm{cm}^2$, 107~133kgf/$\textrm{cm}^2$, 37~46kgf/$\textrm{cm}^2$ and 4.612~5.913$\ell$/$\textrm{cm}^2$/h, respectively. It is concluded that the blast furnace slag and fly ash can be used in permeable polymer concrete.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1989년도 가을 학술발표회 논문집
• /
• pp.5-8
• /
• 1989

Considerable efforts are still being made in the every part of the world to develop new construction materials. The polymer concrete is one of those promising new construction materials. The strength characteristics of fiber-reinforced polymer methods and filler contents on the properties of polymer concrete were explored. The effects of fiber addition are also discussed.

• 한국농공학회논문집
• /
• 제47권2호
• /
• pp.63-72
• /
• 2005

In this study, the physical and mechanical properties of steel fiber reinforced lightweight polymer concrete were investigated experimentally with various steel fiber contents. All tests were performed at room temperature, and stress-strain curve and load-deflection curve were plotted up to failure. The unit weight of steel fiber reinforced lightweight polymer concrete was in the range of $1,020{\sim}1,160\;kg/m^3$, which was approximately $50\%$ of that of the ordinary polymer concrete, The compressive strength, splitting tensile strength, flexural toughness and flexural load-deflection curves after maximum load were shown with increase of steel fiber content. The stress-strain curves of steel fiber reinforced lightweight polymer concrete were bilinear in nature with a small transition zone, Based on these results, steel fiber reinforced lightweight polymer concrete can be widely applied to the polymer composite products.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.703-706
• /
• 2005

This study is analyzed mechanical properties and durability of pavement of a road permeability porous concrete to mix polymer for the enhance of porous concrete of performance and durability. As a result, void ratio showed the tendency which the mixing rate of polymer is decreased a little as increased. And, the influence of void ratio according to the kind of polymer has the difference, but void ratio showed the tendency which the mixing rate of polymer is decreased a little as increased. Compressive strength showed the tendency which the mixing rate of polymer is increased a little as increased. but, it showed the tendency to be reduced rather when above $20\%$ it mixed polymer mixing rate $10\%$ at apex.

• 한국도로학회논문집
• /
• 제15권2호
• /
• pp.39-45
• /
• 2013

PURPOSES : The objective of this study is to evaluate the mechanical characteristics of castor oil based bio-polymer concrete for use of ultra thin overlays. METHODS : To evaluate the mechanical properties of bio-polymer concrete, the various laboratory tests including compressive, tensile, and flexural strength, and elongation tests were conducted on bio-polymer concrete specimens in this study. The mechanical characteristics of bio-polymer concretes were examined by changing the content of hardener and polymer binder to determine the optimum content for ultra-thin overlays. The bio-polymer concrete developed in this study was used for field trial test of the ultra-thin bridge deck pavement for verifying the workability and monitoring the long-term performance of materials. RESULTS : Test results showed that tensile and the flexural strength of bio-polymer concretes increase and the elongation of bio-polymer concrete decreases with increase of binder content. A field adhesive strength tests conducted on bridge deck pavement indicates the bio-polymer concrete has more than 2MPa of adhesive strength satisfy with the design criteria. CONCLUSIONS : The bio-polymer concrete with more than 20% content of castor oil was developed for ultra-thin overlays in this study. It is found from this study that the 35% of hardener content is most appropriate for maintaining the strength characteristics and flexibility.

• 한국농공학회논문집
• /
• 제47권4호
• /
• pp.25-32
• /
• 2005

This study was performed to evaluate the strength properties of polymer concrete using recycled aggre-gate. The compressive strength, splitting tensile strength, flexural strength and pulse velocity of polymer concrete were decreased with increasing the content of recycled aggregate. At the curing age of 7days, the compressive strength was $80.5\~88.3$ MPa, the splitting tensile strength was $9.1\~10.6$ MPa, the flexural strength was $19.2\~21.5$ MPa and the pulse velocity was $3,931\~4,041$ m/s, respectively. Also, the compressive strength, splitting tensile strength, flexural strength and pulse velocity of concrete using recycled fine aggregate were higher than that of the silica sand. Therefore, these recycled aggregate polymer concretes were estimated for high strength concrete without major problem.