• BMB Reports
• /
• 제31권4호
• /
• pp.384-390
• /
• 1998

DNA fragments (51-587 bp) were separated by capillary electrophoresis using entangled polymer, hydroxyethylcellulose, in uncoated fused silica capillary columns. The factors affecting the separation of DNA fragments with hydroxyethylcellulose media were evaluated, i.e., the concentration of buffer and entangled polymer, effects of additives (methanol, ethidium bromide, EDTA), temperature, and injection methods. Maximum performance was obtained by adding 5% methanol in 0.5% hydroxyethylcellulose solution at $30^{\circ}C$. Addition of methanol in polymer media increased the resolution of small size DNA fragments (< 100 bp). On the other hand, addition of ethidium bromide and EDTA, which are commonly used in conventional DNA separation, reduced the resolution of DNA fragments in the polymer solution. It turns out that the separation behavior of DNA in entangled polymer is more sensitive to the running condition compared to that in polyacrylamide gel-filled capillary, but the reproducibility of DNA separation in entangled polymer is reliable.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.187-187
• /
• 2006

A new type solid polymer electrolyte (SPE) composed of poly (vinyl alcohol) (PVA) and lithium trifluoromethanesulfonate ($LiCF_{3}SO_{3}$) was prepared by means of the solution cast technique to observe that Li ion can move by ion hopping decoupled from polymer segmental motion inside of the 'fast cationic transport process'. The highest ion conductivity of the SPEs obtained from ac impedance measurements was $1.42{\times}10^{-3}S/cm$ at room temperature for SPE with 80wt% of salt concentration. Using LSV, we found that the SPEs had good electrochemical stabilities and using FT-IR and AFM, we found the formation of network-like structure.

• 한국환경보건학회지
• /
• 제24권2호
• /
• pp.104-109
• /
• 1998

The objective of this study was to examine the effect of polymer coating on the initial microorganism attachment and the biofilm growth. Such as nonion(polyacrylamine), anion(CMC-Na) and cation polymer coagulant(chitosan and PEI) were used for coating material of the support carrier(acryl plate). When polymer coagulant was coated with 5, 10, 20, 35, 50, 100 and 200 mg/l on the surface of acryl plate, initial microorganism attachment increased and optimum concentration for the attachment was 35 mg/l. Biofilm growth experiments were conducted with the substrate loading of 12.7gSCOD/$m^2\cdot$ day using RBC. The polymer coagulants such as CMC-Na, polyacrylamide, PEI and chitosan coating on the acryl plate facilitated the biofilm growth of microorganisms. Until the biofilm dry weight grows up to 0. 0038g/cm$^2$, biofilm growth on the plate coated with cation polymer like chitosan was better than that on the coated plate of nonion(polyacrylamine), anion(CMC-Na) polymer coagulant.

• Carbon letters
• /
• 제5권2호
• /
• pp.68-74
• /
• 2004

The polymer with contents of $C_{60}$ up to 57 wt.% was produced by mutual condensation of fullerene $C_{60}$ and ethylenediamine. The investigations of this polymer as well as pristine fullerene to comparison were carried out by FT-IR and UV-Vis spectroscopy, ToF-SIMS, TGA, and elemental analysis. At least three kinds of components was revealed as building blocks of polymer. The fullerene cage underwent only distortion but didn't destroy during formation of polymer. The pure fullerene was found as an intermediate of the thermal decomposition of polymer. The conclusion that this polymer could serve as precursor to produce carbon nanomaterial with high concentration curved graphene sheets and can be used for gas adsorption and electrochemical application was made.

• Bulletin of the Korean Chemical Society
• /
• 제17권3호
• /
• pp.245-253
• /
• 1996

A topological theory has been introduced to explain and evaluate the fractional volumes of system materials, the change of the weight and concentration of monomer molecules, molecular weight distribution, and interaction functions of polymer-polymer and polymer-oligomer, etc. for dispersion polymerization. The previous theory of Lu et al. has offered only an incomplete simulation model for dispersion polymer systems, whereas our present one gives a general theoretical model applicable to all the polymerization systems. The theory of Lu et al. considered only the physical property term caused by interaction between matters of low molecular weight (i.e., diluent, monomer, and oligomer) and polymer particles without dealing with physical properties caused by the structure of polymer networks in polymer particles, while our theory deals with all physical effect possible, caused by the displacement of not only entangled points but also junction points in polymer particles. The theoretically predictive values show good agreement with the experimental data for dispersion polymerization systems.

• 한국전기전자재료학회논문지
• /
• 제17권1호
• /
• pp.59-64
• /
• 2004

We have fabricated the polymer dispersed liquid crystal (PDLC) cell where a control of phase separation is very important. The factors to influence the phase separation are mixing ratio of LC and polymer, curing temperature and UV intensity. In this paper, we inspected the change of a phase separation as a function of curing temperature for the mixture of E7 and. NOA65 with different ratios. When the LC concentration is less than polymer such as LC:NOA65 = 40:60wt％, the PDLC cell is influenced strongly by the curing temperature. However, when the LC concentration is much less than polymer such as LC:NOA65 = 80:20wt％, it is influenced slightly by the curing temperature. The reason is because the mixture shows upper critical solution temperature behavior and therefore it is important to know the behavior of phase separation as a function of curing temperature of the mixture.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.191-191
• /
• 2006

The structures of the mesophases and their subunits of PS-b-P4VP in a toluene solution were studied by using SAXS, TEM and GIFT methods. The hierarchical structures of PS-b-P4VP, such as the individual micelle, the face-centered cubic (fcc) and body-centered cubic (bcc) structures and the lamellar structure, were identified for the first time. The diameter of the micelle core was ${\sim}80\;%$ of the most extended chain length of the core chain, suggesting that the core chains were quite stretched. The stretched chain in the core caused the core of the micelle to be not homogenous with a higher density at the center than at the outer part. As the concentration level increases, the fcc and both fcc and bcc appear for the packing of the micelles of PS(3.3k)-b-P4VP(4.7K) and PS(12K)-b-P4VP(11.8K), respectively. The lamellar structure was also identified, with a further increase in the concentration for PS(3.3k)-b-P4VP(4.7K). These hierarchical structures were also identified via TEM images.

• Bulletin of the Korean Chemical Society
• /
• 제8권5호
• /
• pp.398-403
• /
• 1987

A general theory of polymer adsorption at a semi-permeable oil-water interface of the biphasic solution is presented. The configurational factor of the solution in the presence of the semi-open boundary at the interface is evaluated by the quasicrystalline lattice model. The present theory gives the feature of the bulk concentration equilibria between oil-water subsystems and the surface excesses of ${\Gamma}^{\alpha}$ and ${\Gamma}^\{beta}$ of the polymer segments as a function of the degree of polymerization $\gamma$, the Flory-Huggins parameter in $\beta$-phase $x_{\rho}^{{\beta}_{\rho}}$, the differential adsorption energy parameter in $\beta$-phase $x_{\sigma}^{{\beta}_{\rho}}$, the differential interaction energy parameter ${\Delta}x_{\rho}$ and the bulk concentration of the polymer in ${\beta}-phase ${\varphi}_2^{{\beta(*)}_2}$. From our numerical results, the characteristics of ${\Gamma}^{\alpha}$ are shown to be significantly different from those of ${\Gamma}^{\beta}$ in the case of high polymers, and this would be the most apparent feature of the adsorption behavior of the polymer at a semi-permeable oil-water interface, which is sensitively dependent on ${\Delta}x_{\rho}$ and r.

• 한국응용과학기술학회지
• /
• 제27권4호
• /
• pp.545-551
• /
• 2010

Hydrophobically monoendcapped poly(sodium acrylate)s formed hydrophobic microdomains in water. This was concluded on poly(sodium acrylate)s with a linear $C_{12}$-alkyl chain attached specifically at the end of the polymer. There was no well defined CMC (critical micelle concentration), but rather a gradual transition from a micelle free solution to a micelle solution. Steady state fluorescence spectroscopy indicates that the micro domains are rather hydrophobic. At pH 5 in the abscence of salt and at pH 9 in the prescence of 1 M sodium citrate the CAC (critical aggregation concentration) was in the range of 0.1 to 2.4 mM. However at pH 5 there was a linear increase in the transition concentration with a head-group size due to an increase in steric and electrostatic repulsions between polymer main chains. At pH 9 in the abscence of salt the transition concentration was in the range of 1 to 80 mM. For the larger polymers there was a effect which consisted of a concentration gradient of sodium counterion toward the hydrophobic domain. The effect was larger for the larger polymers because of the higher total sodium concentration and the less steep counterion concentration gradient.

• 한국염색가공학회지
• /
• 제21권5호
• /
• pp.27-34
• /
• 2009

PET fabric was dyed in black shade with disperse dyes of three primary color. The effect of combination ratio of dye concentration and energy type of disperse dye on dyeing and color property of black dyed PET fabric was investigated. Dyeing compatibility of disperse dyes of three primary color on PET was evaluated by comparison of dyeing rates of them. From the results, color property was dependent upon the combination ratio of dye concentration. In order to obtain low lightness ($L^*$) and black color, blue dye should be added enough. S-type disperse dye and $130^{\circ}C$ dyeing was suitable rather than SE-type dyes or $120^{\circ}C$ dyeing. Disperse dyes of three primary color used showed good dyeing compatibility at high dye concentration. Washfastness was fair to moderate and lightfastness was moderate.