• Asian Journal of Turfgrass Science
• /
• v.11 no.2
• /
• pp.97-104
• /
• 1997

The objective of this study was to observe the differences in growth of creeping bentgrass turf to 'polymer coated urea fertilizer' and 'uncoated urea fertilizer', and to analyze durability of fertilizer effect with the 'polymer coated urea'. The experiment was initiated on June 3, 1996, at the Iowa State University Horticulture Research Station, north of Ames, Iowa. The experiment was conducted on an area of 'Penneagle' Creeping bentgrass(Agrostis palustris) maintained at fair-'way mowing height (1.3cm). The study was repeated at the same arrangement beginning on July 25, 1996. Visual quality data, clipping fresh and dry weight, and nitrogen(N) content in the clippings were taken weekly. Quality of the turf increased with increasing N rate. While quality ratings were higher for turf receiving polymer coated urea than for turf receiving uncoated urea at several times following treatment, but not significant. Fresh and dry clipping weights were quite variable during the trial. Visual quality rating and clipping yields improved with increasing rates of N but these differences were not statically significant between polymer coated and uncoated urea treatment. The durability of fertilizer efficiency in polymer coated urea was not last longer compare with uncoated urea from two weeks after treatment. Higher rates of N application increased the concentration of N in tissue but no significant differences between turf plots receiving polymer coated and uncoated urea. Key words: Polymer coated urea, Creeping bentgrass, Fertilizer, Turfgrass.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.1
• /
• pp.34-41
• /
• 2017

Objective: Two experiments were performed to evaluate the effects of coated slow-release urea on nutrient digestion, ruminal fermentation, nitrogen utilization, blood glucose and urea concentration (Exp 1), and average daily gain (ADG; Exp 2) of steers. Methods: Exp 1: Eight ruminally fistulated steers [$503{\pm}28.5kg$ body weight (BW)] were distributed into a d $4{\times}4$ Latin square design and assigned to treatments: control (CON), feed grade urea (U2), polymer-coated slow-release urea A (SRA2), and polymer-coated slow-release urea B (SRB2). Dietary urea sources were set at 20 g/kg DM. Exp 2: 84 steers ($350.5{\pm}26.5kg$ initial BW) were distributed to treatments: CON, FGU at 10 or 20 g/kg diet DM (U1 and U2, respectively), coated SRA2 at 10 or 20 g/kg diet DM (SRA1 and SRA2, respectively), and coated SRB at 10 or 20 g/kg diet DM (SRB1 and SRB2, respectively). Results: Exp 1: Urea treatments (U2+SRA2+SRB2) decreased (7.4%, p = 0.03) the DM intake and increased (11.4%, p<0.01) crude protein digestibility. Coated slow-release urea (SRA2+-SRB2) showed similar nutrient digestibility compwared to feed grade urea (FGU). However, steers fed SRB2 had higher (p = 0.02) DM digestibility compared to those fed SRA2. Urea sources did not affect ruminal fermentation when compared to CON. Although, coated slow-release urea showed lower (p = 0.01) concentration of $NH_3-N$ (-10.4%) and acetate to propionate ratio than U2. Coated slow-release urea showed lower (p = 0.02) urinary N and blood urea concentration compared to FGU. Exp 2: Urea sources decreased (p = 0.01) the ADG in relation to CON. Animals fed urea sources at 10 g/kg DM showed higher (12.33%, p = 0.01) ADG compared to those fed urea at 20 g/kg DM. Conclusion: Feeding urea decreased the nutrient intake without largely affected the nutrient digestibility. In addition, polymer-coated slow-release urea sources decreased ruminal ammonia concentration and increased ruminal propionate production. Urea at 20 g/kg DM, regardless of source, decreased ADG compared both to CON and diets with urea at 10 g/kg DM.

• Polymer(Korea)
• /
• v.38 no.6
• /
• pp.720-725
• /
• 2014

Aminopropyl terminated polydimethylsiloxane was synthesized by hydrosilylation reaction with hydride terminated polydimethlysiloxane and allyl amine. Polydimethylsiloxane modified urea with isocyanate group was prepared from cyclic trimer of hexamethyldiisocyanate with aminopropyl terminated polydimethylsiloxane. Polydimethylsiloxane modified urea/acrylate resin (PUA) was prepared from the urethane reaction of PU with isocyanate group and 2-hydroxyethylmethacrylate. PUA structure was analyzed by FTIR and NMR. Coating materials were prepared by mixing PUA, acrylic monomer, photo-initiator, and solvent and coated on PET film to obtain flexible hard coating film by UV irradiation.

• Journal of Adhesion and Interface
• /
• v.22 no.2
• /
• pp.47-56
• /
• 2021

Steel plates coated by self-healable polymer still can be rusted since it takes time to be healed. In this study, dual self-healing coating material is developed using corrosion inhibitor (DTBEDA) which can form hindered urea (HUB) as reversible cross-linking bond at the same time. Developed dual self-healing polymer is coated on steel plate, and scratch healing property was investigated by surgical blades and nano/micro indentation tester. The anticorrosion effect of DTBEDA was investigated by electrochemical impedance spectroscopy (EIS).

• Macromolecular Research
• /
• v.15 no.1
• /
• pp.22-30
• /
• 2007

High water vapor permeable coating materials were prepared by blending aqueous poly(vinyl alcohol) (PVA) solution with waterborne polyurethane-urea (WBPU) dispersions synthesized by prepolymer mixing process. Stable WBPU/PVA dispersions were achieved at PVA content below 30 wt%. As the water soluble polymer PVA content increased, the number and density of total micro-pores (tunnel-like/isolated micro-pores) formed after the dissolution of PVA in water increased, and the water vapor permeability of coated Nylon fabric also increased significantly. Using WBPU/water soluble polymer PVA blends as a coating material and then dissolving PVA in water was confirmed to be an effective method to obtain prominent breathable fabrics.

• Korean Journal of Soil Science and Fertilizer
• /
• v.30 no.2
• /
• pp.108-113
• /
• 1997

A field experiment was conducted to evaluate effect of phosphate coated slow release fertilizer on the directly seeded rice. Odae byeo was seeded by drill under dry condition. The soil was a sandy clay loam soil located in the Experimental Farm of the Kangweon National University, Chuncheon, Kangweon-Do. The yield of rice from the urea applicated directly seeded field was 84.9% of the yield from the transplanted field, and showed no difference between split application treatments. The yield from the phosphate coated slow release fertilizer was the highest showing 110.7% of the yield from the urea application. The yield from the polymer coated slow release fertilizer was 90.4%. The yield from the organic fertilizer 400kg/10a treatment was 81.8% and was 94.8% from the organic fertilizer 600kg/10a treatment. In 1996 experiment, the yield from the phosphate coated slow release fertilizer was higher than the yield from the transplanted field. The $NO_3-N$ and $NH_4-N$ concentrations in soil solution at the depth of 15cm revealed that nitrogen leaching was the highest from the urea N40-0-30-30 treatment, and the lowest from the phosphate coated slow release fertilizer. The phosphorus concentration showed similar pattern. Therefore, use of phosphate coated slow release fertilizer increased rice yield and decreased loss of nitrogen and phosphorus loss.

• Journal of the Korean institute of surface engineering
• /
• v.50 no.6
• /
• pp.523-530
• /
• 2017

In this study, we developed the h-BN interphase for ceramic matrix composites (CMCs) through a wet chemical coating method, which has excellent price competitiveness and is a simple process as a departure from the existing high cost chemical vapor deposition method. The optimum condition for nitriding an h-BN interphase using boric acid and urea as precursors were derived, and the h-BN interphase coating through a wet method on a carbon preform of 2.5 D was conducted to apply the optimum conditions to the CMCs. In order to control the coating property via the wet coating method, four parameters were investigated such as dipping time of the specimen in the precursor solution, the ratio of boric acid and urea in the precursor, the concentration of solution where the precursor was dissolved, and the cycle of dipping and dry process. The CMCs was fabricated through polymer impregnation and pyrolysis (PIP) processes and a three-point flexural strength test was conducted to verify the role of the coated h-BN interphase.

• Journal of the Korean Applied Science and Technology
• /
• v.20 no.1
• /
• pp.8-19
• /
• 2003

Environmental friendly acrylics/urea high-solid paints (BEHCU) were prepared through the curing reaction of acrylics resin(BEHC) containing 70wt% of solids content and butylated urea curing agent. BEHC was synthesized by addition copolymerization of caprolactone acrylate(CLA), 2-hydroxypropyl methacrylate(2-HPMA), ethyl methacrylate, and n-butyl acrylate. The addition polymerization of these monomers, especially including flexible CLA monomer and 2-HPMA monomer with OH funtional group, under appropriate reaction conditions resulted in polymers with controlled glass transition temperature($T_g$) and crosslinking density. The molecular weight($M_w$) of these polymers(BEHCs) was 2940${\sim}$3240 and polydispersity ($M_w/M_n$) was in the range of 1.61${\sim}$1.72. The viscosity and the molecular weight of these acrylic resins increased with increasing $T_g$. The coated films were prepared using curing reaction between BEHC resin and butylated urea curing agent at 100$^{\circ}C$ for 30 minutes. Our experimental resulted showed that enhancement of the coating properties such as adhesion, flexibility, impact resistance, water resistance, and abrasion resistance could be expected through introducing CLA component in acrylic resin for the high-solid content acrylics/urea coatings.

• Korean Journal of Soil Science and Fertilizer
• /
• v.35 no.5
• /
• pp.264-271
• /
• 2002

Nitrogen releasing characteristics of polymer-coated urea(PCU) that made acrylic synthetic resins were studied in incubated soil, water and paddy soil. Also, their correlations and degradation patterns of coating material were tested. Releasing rate of nitrogen from PCU decreased with increasing coating rate. N001(coating rate 8.5%) and N003(coasting rater 6.3%) were low releasing amount at the early stage, whereas N005(coating rate 4.8%) was released over 80% within 20 days. Relationship of the releasing rate between incubated soil($25^{\circ}C$) and paddy soil could be described as follows : $Y=-0.0011X^2+2.2931X-50.264(R^2=0.9884)$ for N001, $Y=-0.0016X^2+1.1587X+5.5064(R^2=0.9805)$ for N003 and $Y=-0.03X^2+6.499X-243.22(R^2=0.9422)$ for N005, respectively (Y: release rate at field condition, X: experiment period). Relationship of the releasing rate between incubated water($30^{\circ}C$) and paddy soil can be described as follows : $Y=0.0011X^2+2.2601X-25.329(R^2=0.9884)$ for N001, $Y=-0.0306X^2+4.4994X-76.307(R^2=0.955)$ for N003 and $Y=-0.0164X^2+3.7764X-108.22(R^2=0.9422)$ for N005. After 150 days, coating materials of N001, N003, and N005 in incubated soil were degraded approximately 23%, 22% and 15%, respectively. Also The scanning electron microscope examination of coating material revealed that particle surface became gradually shattered with the time after the soil treatment.

• Asian Journal of Turfgrass Science
• /
• v.25 no.2
• /
• pp.190-194
• /
• 2011

Potassium (K) is one of the essential nutrients for plants but is not a constituent of any plant compound. K is substances for activation of many enzymes and influences the process that the enzymes are involved in catalyzing. Although experimental results associated with the K effects with both benefits and no effects on turfgrass growth were reported, the limited research results of K effects on turfgrass among K sources are available in Korea. The objectives of the study was conducted to evaluate responses of Kentucky bluegrass (Poa pratensis L.) treated by fertilizer treatments with six K sources. There were six fertilizer treatments as K sources applied to Kentucky bluegrass which were potassium nitrate (13-0-44, PN), potassium chloride (0-0-60, PC), potassium sulfate (0-0-50, PS), polymer-coated potassium sulfate (0-0-45, PPS), potassium thiosulfate (0-0-25, PT), and potassium sulfate granulated with methylene urea (20-0-25, PSU). Potassium of $8g\;m^{-2}$ and N of $5g\;m^{-2}$ was applied 4 times giving a total 20 and $30g\;m^{-2}$, respectively. Although significant differences were found for turfgrass color, quality, chlorophyll index, and clipping dry weight, no consistent results among K sources were found during the one year study. Overall, K treatments didn't affect turfgrass growth in this study.