• Steel and Composite Structures
• /
• v.18 no.5
• /
• pp.1161-1176
• /
• 2015

The connection between a column and a beam is of particular importance to ensure the safety of civil engineering structures, such as high-rise buildings and bridges. While the connector must bear sufficient force for load transmission, increase of its ductility, toughness and damping may greatly enhance the overall safety of the structures. In this work, a composite beam-column connector is proposed and analyzed with the finite element method, including effects of elasticity, linear viscoelasticity, plasticity, as well as geometric nonlinearity. The composite connector consists of three parts: (1) soft steel; (2) polymer; and (3) conventional steel to be connected to beam and column. It is found that even in the linear range, the energy dissipation capacity of the composite connector is largely enhanced by the polymer material. Since the soft steel exhibits low yield stress and high ductility, hence under large deformation the soft steel has the plastic deformation to give rise to unique energy dissipation. With suitable geometric design, the connector may be tuned to exhibit different strengths and energy dissipation capabilities for real-world applications.

• Journal of Fashion Business
• /
• v.23 no.2
• /
• pp.77-88
• /
• 2019

One way of appling 3D printing to garments is through the combination of 3D polymer filaments in textile fabrics. it is essential to understand the interface between the polymer and the 3D composite fabric in order to enhance the adhesion strength between the polymers and the peeling strength between the fabric and the polymer. In this study, the adhesion of composite printed specimens using a combination of fabric and polymers for 3D printing was investigated, and also the change in adhesion was investigated after the composite fabric printed with polymers was subjected to constant pressure. Through this process, the aims to help develop and utilize 3D printing textures by providing basic data to enhance durability of 3D printing composite fabrics. The measure of the peeling strength of the composite fabric prepared by printing on a fabric using PLA, TPU, Nylon polymer was obtained as follows; TPU polymer for 3D printing showed significantly higher peel strength than polymers of composite fabric using PLA and Nylon polymer. In the case of TPU polymer, the adhesive was crosslinked because of the reaction between polyurethane and water on the surface of the fabric, thus increasing the adhesion. It could be observed that the adhesion between the polymer and the fiber is determined more by the mechanical effect rather than by its chemical composition. To achieve efficient bonding of the fibers, it is possible to modify the fiber surface mechanically and chemically, and consider the deposition process in terms of temperature, pressure and build density.

• Composites Research
• /
• v.27 no.3
• /
• pp.115-121
• /
• 2014

The effect of addition of gypsum on the rheology, physico-mechanical properties, thermal properties and morphology development of polymer composites based on polyvinyl chloride (PVC) and waste-gypsum with and without methylene-butadiene-styrene (MBS) has been studied. It was shown that the replacement of gypsum for methylene-butadiene-styrene (MBS) component in PVC/gypsum polymer composites enhanced the tensile strength and stiffness of composites, but gradually decreased its impact strength. The observation of morphology, the results of the physico-mechanical properties and thermal properties proved simultaneously that PVC/gypsum composite with the waste-gypsum content of 22.56 wt% reached the optimum results among five kinds of PVC/gypsum polymer composite materials investigated.

• Computers and Concrete
• /
• v.24 no.5
• /
• pp.413-422
• /
• 2019

In this study, 3D Meso-scale finite-element model is presented to study the mechanical behavior of steel microfiber-reinforced polymer concrete considering the random distribution of fibers in the matrix. The composite comprises two separate parts which are the polymer composite and steel microfibers. The polymer composite is assumed to be homogeneous, which its mechanical properties are measured by performing experimental tests. The steel microfiber-polymer bonding is simulated with the Cohesive Zone Model (CZM) to offer more-realistic assumptions. The CZM parameters are obtained by calibrating the numerical model using the results of the experimental pullout tests on an individual microfiber. The accuracy of the results is validated by comparing the obtained results with the corresponding values attained from testing the steel microfiber-reinforced polymer concrete incorporating 0, 1 and 2% by volume of microfibers, which indicates the excellent accuracy of the current proposed model. The results show that the microfiber aspect ratio has a considerable effect on the mechanical properties of the reinforced polymer concrete. Applying microfibers with a higher aspect ratio improves the mechanical properties of the composite considerably especially when the first crack appears in the polymer concrete specimens.

• Polymer Science and Technology
• /
• v.10 no.1
• /
• pp.20-34
• /
• 1999

• Polymer Science and Technology
• /
• v.21 no.2
• /
• pp.157-166
• /
• 2010

• Polymer Science and Technology
• /
• v.25 no.2
• /
• pp.135-139
• /
• 2014

• Journal of the Korean Ceramic Society
• /
• v.35 no.6
• /
• pp.603-609
• /
• 1998

The composites of insulating polymer filled with conducting carbon-fiber were fabricated by molding press method. To understand the fiber aspect-ratio dependence of electrical conductivity the aspect ratio was varied from 4 to 10 The percolation thresholds of transition from the insulator to the conductor de-creased as the fiber aspect ratio increased. The percolation threshold of fiber-segregated composite in this study was smaller than that of fiber-random composite shown in other study. When the electrical con-ductivity curves were fitted by general effective medium equation morphological variable(t) decreased as the fiber aspect-ratio increased.

• Elastomers and Composites
• /
• v.51 no.4
• /
• pp.342-349
• /
• 2016

Characteristics of the swelling-induced wrinkles on the surfaces of natural rubber (NR) film were investigated. The wrinkle structure was generated by swelling of NR film pre-stretched and firmly bonded onto an aluminum substrate in hexane. A novel experimental method was adopted to replicate the swelling-induced wrinkles on the NR film using an epoxy-hardener system. To get insight into the wrinkle parameters; the wrinkle length (L), wrinkle distance (D), wrinkle height (H) and the angle between two consecutive wrinkles (${\theta}$), the cross-sections of the replicas obtained from saturated swollen NR film were examined using an optical microscopy (OM). From the OM images, the wrinkling parameters were measured as a function of the thickness of NR film from 0.42 to 1.76 mm. Also, it was evaluated that the effects of swelling time on the wrinkling parameters. The length (L), distance (D) and height (H) of wrinkles increased as the thickness of the NR film and the swelling time increased. However, the angle between the wrinkles (${\theta}$) showed a sharp decrease up to a swelling time of 200 minutes and slightly decreased afterwards.

• Polymer(Korea)
• /
• v.31 no.5
• /
• pp.436-441
• /
• 2007

In this work, the multiwalled carbon nanotubes(MWNTs) were functionalized with sodium dodecylbenzene sulfonate(SDBS) and then MWNTs/Lyocell composite fibers were prepared. The properties of MWNTs, the functionlization on the surface of MWNTs and their dispersion in the cellulose matrix were characterized by TEM, SEM, WAXD and FT-IR. The results showed that SDBS has been coated successfully onto the surface of the MWNTs by functionlization. This can improve effectively the dispersion uniformity of MWNTs in NMMO aqueous solution and is helpful to prepare a spinnable spinning dope. Moreover, the resultant MWNTs/Lyocell composite fibers still have cellulose II crystal structure, and their tensile strength and initial modulus increased with the increasing draw ratio and reached the optimal value with adding 1 wt% MWNTs. The thermal stability of the composite fiber was also improved by the addition of the MWNTs.