• Journal of Chest Surgery
• /
• v.46 no.1
• /
• pp.1-13
• /
• 2013

Background: Glutaraldehyde (GA) is a widely used cross-linking agent for improving mechanical properties and resistance to enzymatic degradation of collagenous tissue, but it has several drawbacks such as calcification and cytotoxicity. The aim of this study was to find the alternative effective cross-linking methods to GA. Materials and Methods: Bovine pericardium was processed with GA with ethanol+octanol and glycine detoxification, and polyethylene glycol (PG) space filler, dimethyl 3,3'-dithiobispropionimidate (DTBP), 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) treatment, and the physical fixation of ultraviolet irradiation were done. The biologic material properties of variously treated pericardial tissues were assessed by biochemical, mechanical and histological tests. Treated pericardial tissues were also implanted subcutaneously or intramuscularly into the rabbit for 10 weeks to assess the xenoreactive antibody response of immunoglobulin G and M, their anti-calcification effect. Results: The biochemical and mechanical properties of EDC fixed pericardial tissues were comparable to the GA fixed tissue. The cytotoxicity was lowest in space filler treated GA fixed group. In rabbit subcutaneous or intramuscular implantation models, decellularization, space filler, EDC treatment group showed significantly lower calcium content than GA only and DTBP treatment group (p<0.05, analysis of variance). The titer of anti $Gal{\alpha}1-3Gal{\beta}1$-4GlcNAc-R antibodies did not change in the postimplantation serial enzyme-linked immunosorbent assay. Hematoxylin and eosin and von Kossa staining showed that decellularization, space filler, EDC, and ultraviolet treatment had less inflammatory cell infiltration and calcium deposits. Conclusion: The decellularization process, PG filler, and EDC treatments are good alternative cross-linking methods compared to GA only fixation and primary amine of DTBP treatment for cardiovascular xenograft preservation in terms of the collagen cross-linking stability and in vivo anti-calcification effects.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.31 no.4
• /
• pp.447-453
• /
• 1986

Germination and seedling elongation of soybeans [cult. ‘Williams’] were measured at two temperatures (15 and 3$0^{\circ}C$), three seed water contents (30, 50, and 70%), and with and without polyethylene glycol-8000 (PEG) treatments. A split-plot design was used with four replications. Observations were made from two hours to eight days for each treatment combination. Seeds were soaked with 30% PEG solution with 0.2% thiram at 15 C for six days, rinsed with deionized water and dried at 25.5$^{\circ}C$ for three days. Ten treated or untreated seeds were placed on Whatman No. I (9 cm) filter paper in plastic petridishes to which sufficient deionized water was added to adjust seed moisture content to the desired level. The dishes were then sealed with parafilm and placed in a continuous programmed temperature chamber under dark condition. Seedling growth did not occur at either temperature when moisture content was 50 percent or less. Osmo-conditioning with PEG showed positive effects on seedling moisture uptake and seedling growth at 15$^{\circ}C$ but little effect at 3$0^{\circ}C$. Seedling moisture content increased rapidly early in the germination period and reached 60% at 15 C for 56 hours and at 3$0^{\circ}C$ for 28 hours. Seedling growth started when seed moisture reached a critical point of 60% at 15$^{\circ}C$, however, growth started after 20 hours of germination at 3$0^{\circ}C$. Seedlings of soybeans elongated more than four times faster at 3$0^{\circ}C$ than at 15$^{\circ}C$. Water uptake during germination was characterized by two phases in this experiment.

• Journal of Pharmaceutical Investigation
• /
• v.40 no.3
• /
• pp.175-180
• /
• 2010

Albumin-modification has been viewed as one of the most effective ways of extending the short in vivo lifetimes of peptide drugs by delaying glomerular filtration. In this study, we describe a new type 2 anti-diabetic exendin-4 (Ex4) peptide derivative with significant binding ability to human serum albumin (HSA). This exendin-4 derivative consists of a 4-branched polyethylene glycol $(PEG)_{5k}$ (Mw: 20 kDa) modified with three stearylamines ($C_{18}-NH_2$) and one exendin-4 on its branches. PEG and stearylamine were selected to provide functionality to increase molecular size and bind to albumin, respectively. This derivative ($3C_{18}-4PEG_{5k}$-Ex4) was shown to have larger molecular size (Ca. 152 kDa) than actual (25.0 kDa) when subjected to size-exclusion chromatography, and the fluorescein-tagged $3C_{18}-4PEG_{5k}$-Ex4 displayed significant binding to the HSA-immobilized Sepharose CL-4B resin using confocal laser scanning microscopy. Furthermore, $3C_{18}-4PEG_{5k}$-Ex4 was found to have acceptable anti-hyperglycemic efficacy via three consecutive oral glucose tolerance testings (OGTT) in fasted type 2 diabetic db/db mice. The $HD_{total}$ value ($57.6{\pm}12.3%$) of $3C_{18}-4PEG_{5k}$-Ex4 at a 50 nmol/kg dose was 2-fold greater than that ($31.0{\pm}8.7%$) of native exendin-4 in non-fasted db/db mice. Especially, the blood glucose levels in the mice group treated with $3C_{18}-4PEG_{5k}$-Ex4 did not rebound to ~150 mg/dL until 24 h after the injection, which obviously shows the extended hypoglycemia. We believe that this derivative has great pharmaceutical potential as a novel long-acting type 2 anti-diabetic injection treatment.

• Analytical Science and Technology
• /
• v.27 no.2
• /
• pp.100-107
• /
• 2014

Plastic has been widely used in modern artworks' materials due to its merits of process ability and mass production. In the country, value of plastic artifact is increasing but the field of plastic study is limited to industrial purpose. In this study, Identification methods of plastic were performed by SPME-GC/MS and pyrolysis-GC/MS using trace of samples. As a result of identification using SPME-GC/MS, aromatic compounds were identified from polyvinyl chloride. And alkane compounds were identified from polyethylene, and polypropylene. Aromatic compounds were identified from polystyrene, and diethylene glycol appeared in polyurethane based on polyester was identified from polyurethane. As a result of identification using pyrolysis- GC/MS, aliphatic alkenes compounds and phthalate(DEHP) were identified from polyvinyl chloride. Aliphatic alkenes compounds and phthalate(DIBP) were detected from polyethylene. 1-hexene, etc., were detected from polypropylene, aromatic compounds were identified from polystyrene, and methylene diphenyl diisocyanate which is polyurethane basic material was confirmed from polyurethane. This study suggested that non-destructive SPME and pyrolysis-GC/MS are useful to identify compounds particularly polystyrene and polyurethane. These two analytical methods were expected to be applied for identification of unidentified plastic artworks before conservation treatment.

• Journal of the Korean Wood Science and Technology
• /
• v.3 no.1
• /
• pp.3-15
• /
• 1975

How to stabilize wood against shrinking and swelling in variable atmospheric moisture conditions is important to the wood-using industry and a challenge to research. Polyethylene glycol stabilize wood by bulking the fiber. PEG also serve as a chemical seasoning agent, suppress decay in high concentrations, and have slight effect on physical properties, gluing or finishing. The study designed to determine the effect of PEG-400 on the dimensional stabilization of local hardwoods for wood carvings that could supply a greatly expanding tourist trade and making curved furniture parts, lamp stands and other decorative objects, and possible gunstock. The species examined were 6 species, Seo-Namoo (Carpinus laxiflora), Cheungcheung-Namoo (Cornus controversa), Gorosae-Namoo (Acer mono), Karae-Namoo (Juglans mandshurica), Jolcham-Namoo (Quercusserrata) and Sanbud-Namoo (Prunus sargentii), used as block of 5cm thick radially to the grain, 7cm wide tangentially, and 70cm long parallel to the wood grain. All these test piecies were conditioned above the fiber saturation point before impregnation. The stabilization effects were determined for PEG-400 treated woods in a 50 percent solution for 20 days. The following conclusions were obtained. PEG retentions increased with treating time. It was more effective to treat at 60$^{\circ}C$ than at room temperature. In degree of PEG-400 impregnation on species, Cheungcheung-Namoo havinglow specific gravity had the highest retentions, 68.77% but the lowest, 56.33% was shown in Jolcham-Namoo with high specific gravity. Specific gravity of treated wood increased considerably with effectiveness of polymer loading. The increases in specific gravity were 5.36 to 13.16 percent. The highest was Jolcham-Namoo, the lowest Karae-Namoo. On the dimensional stability, a 40 percent of effectiveness of polymer loading was just as effective as 60 percent in reduction in water absorptivity (RWA), antishrinkage efficiency (ASE) and antiswelling efficiency (AE), and from over 60 percent they increased more rapidly. Also species response varied considerably. ASE was 30.12 to 69.97 percent tangentially and 27.86 to 56.37 percent radially, AE 34.06 to 73.76 percent tangentially and 30.11 to 70.12 percent radially, and RWA 42.31 to 65.32 percent. No differences in volume swelling among the 6 species were observed. Its values were ranged from 14.98 to 19.55 percent and also increased with PEG retentions. On the mechanical properties, the strengths very much decreased with PEG-400 loadings as shown in Figure 12; that were 11.41 to 22.90 percent in compression, 21.61 to 34.35 percent in bending and 22.83 to 36.83 percent in tensile strength. PEG retention in cell wall was less than 1 percent and the most of PEG were immersed in cell lumen. Except for Korae-Namoo, effectivenesses of polymer loading were as much high as 61.58 to 75.02 percent. This is believed to be due to the effect of PEG-400 on excellant dimensional stability of treated woods.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.3
• /
• pp.271-277
• /
• 2000

Transparent $TiO_2$ thin films were prepared by the sol-gel method from titanium alkoxide aqueous solution containing large quantities of water. To prepare the aqueous system sol, the chelate compound solution were prepared from each 1 mole of titanium(IV)iso-propoxide, acetylacetone and 8 moles of isopropyl-alcohol. And then the 50 moles aqueous solution with the 0.02~0.50 moles of HCI for sol stability and the 0.3 mole of polyethylene glycol for coating adhesion were precisely dropped on the chelate compound solution. $TiO_2$thin films were fabricated by dip coating, drying and heat treatment at $400^{\circ}C$ and their characteristics were investigated by XRD, SEM and UV-visible spectrometer, The neutral sol of composition with TTIP : AcAc : IPA : $H_2O$ : PEG : HCl = 1 : 1 : 8 : 50 : 0.3 : 0.15 (molar ratio) was maintained stable sol condition and without problem for coating more than 30 days. The anatase phase $TiO_2$thin film prepared from 30 times dipping, drying and heat treating showed the flat surface and the fine microstructure of fracture surface with about 2 $\mu\textrm{m}$ thickness. Transparency of these $TiO_2$thin film was 80 % in the visible region.

• Applied Chemistry for Engineering
• /
• v.27 no.6
• /
• pp.599-605
• /
• 2016

Recently, photodynamic and photothermal therapies have received increasing attention as an effective cancer treatment. In this study, a gold nanorod (AuNR) colloidal solution was synthesized as a hyperthermia agent for photothermal therapy and also modified with photosensitizer (PS) for photodynamic therapy. PEG (polyethylene glycol) and FA (folic acid) ligand were also introduced into AuNR for the long circulation in human body and efficient targeting of cancer cells, respectively and AuNRs were modified with FA-PEG and poly-${\beta}$-benzyl-L-aspartate (PBLA) block copolymers through a 3,4-dihydroxy hydrocinnamic acid (HCA) linker. A series of AuNRs with various aspect ratios were synthesized by controlling the feeding ratio of $AgNO_3$. The physicochemical property and morphology of synthesized AuNR100 and FA-PEG-$P(Asp)_{50}$-HCA-AuNR100 were analyzed by UV-visible spectrophotometer, $^1H$ NMR, XPS measurements, TEM. The surface modified AuNR carrier with biocompatibility could be applied for the effective diagnosis as well tumor phototherapy.

• Journal of Plant Biotechnology
• /
• v.33 no.2
• /
• pp.133-137
• /
• 2006

Evaluation of physiological performance of trehalose-producing transgenic rice line was conducted to investigate drought tolerance at early growth stage. Under artificially induced drought condition of 8% polyethylene glycol 6000, this transgenic rice line had leaf photosynthetic rate of 11.08 uml CO$_2$ $m^{-2}s^{-1}$, leaf transpiration rate of 8.38 mmol $H_2O$ $m^{-2}s^{-1}$ and leaf water potential of -1.12 MPa after 96 hours of treatment. Nakdongbyeo, the parent of this tyansgenic rice line, had photosynthetic rate of 15.42 $\mu$mol CO$_2$ $m^{-2}s^{-1}$, leaf transpiration rate of 8,04 mmol $H_2O$ $m^{-2}s^{-1}$ and leaf water potential of -0.88 MPa. The other variety used in this experiment for comparison, IR 72, showed higher values than both tyansgenic rice line and variety Nakdonbyeo on all three parameters; leaf photosynthetic rate of 20.61 $\mu$mol CO$_2$ $m^{-2}s^{-1}$, leaf transpiration rate of 12.88 mmol $H_2O$ $m^{-2}s^{-1}$, and leaf water potential of -0.82 MPa. So this transgenic rice line did not show superior performance in leaf transpiration rate, leaf photosynthetic rate and leaf water potential compared to variety Nakdongbyeo. This result along with visual observation on leaf rolling and drying during the experimental period indicated poor physiological performance of this transgenic rice line. Further studies on metabolic status of stress-induced trehalose, along with study on physiological response of this transgenic rice line during drought stress would shed more light on overall physiological performance of this transgenic rice line.

• Journal of Microbiology and Biotechnology
• /
• v.1 no.3
• /
• pp.151-156
• /
• 1991

In order to construct a yeast strain having high ethanol tolerance together with good lactose fermentation ability, the protoplast fusion using Saccharomyces cerevisiae STV 89 and Kluyveromyces fragilis CBS 397 was carried out. Auxotrophic mutants of K. fragilis were obtained as a selection marker by treatment of ethylmethane sulfonate. The best mutant for protoplast fusion was selected based on the capabilities of ${\beta}-galactosidase$ production and lactose fermentation. The protoplast fusion using polyethylene glycol and calcium chloride solution led to the fusion frequence of $3{\times}10^{-6}$ and a number of fusants were obtained. Among these fusants, a fusant F-3-19 showed the best results in terms of ethanol tolerance, ${\beta}-galactosidase$ activity and lactose fermentation. The performance of lactose fermentation and ethanol tolerance by this fusant were better than those of K. fragilis. Study on the ethanol tolerance having relation to fatty acid composition and intracellular ethanol concentration revealed that the fusant F-3-19 had a higher unsaturated fatty acids content and accumulated less amount of intracellular ethanol compared with a parent of K. fragilis.

• Membrane and Water Treatment
• /
• v.11 no.4
• /
• pp.237-245
• /
• 2020

The effects of the mixed two solvents, Dimethylacetamide (DMAc) and Dimethylformamide (DMF), and Polyethylene glycol (PEG) and Polyvinylpyrrolidone (PVP) as additives on performance of Polyvinylidene fluoride (PVDF) membranes were studied. Initially, PEG200 was used as a primary additive at fixed percentage of 5% wt. PVP was then blended with PEG200 in different concentrations. PVDF and DMAc were used as polymer and solvent in the casting solutions, respectively. To control the diffusion rate of PVP in the presence of PEG200 and PVP blend, mixtures of DMAc and DMF were used as the mixed solvent in the casting solutions. Asymmetric PVDF membranes were prepared via phase inversion process in a water bath and the effects of two additives and two solvents on the membrane morphology, pure water flux (PWF), hydrophilicity and rejection (R) were investigated. Attenuated Total Reflection Fourier Transform Infrared Spectra (ATR-FTIR) analysis was used to show the residual PVP on the surface of the membranes. Atomic Force Microscopy (AFM) was utilized to determine roughness of membrane surface. The use of mixed solvents in the casting solution resulted in reduction of PVP diffusion rate and increment of PEG diffusion rate. Eventually, PWF and R values reduced, while porosity and hydrophilicity increased.