• 한국농공학회논문집
• /
• 제51권6호
• /
• pp.97-103
• /
• 2009

This study was performed to evaluate the strength and durability properties of recycled polymer concrete using unsaturated polyester resin and recycled aggregates. Unsaturated polyester resin, natural and recycled aggregates and fly ash were used. The mix proportions were determined to satisfy the requirement for the workability and slump according to aggregate sizes (5-10 and 5-25 mm) and unit binder contents (10% and 12%). Tests for the compressive and flexural strength, freezing and thawing and durability for 20% sulfuric solution were performed. The compressive and flexural strength of recycled polymer concrete were in the range of 85~97 MPa and 17.9~20.8 MPa, respectively. The strengths of recycled polymer concrete using recycled aggregate have similar or slightly decreased compared to polymer concrete using natural aggregate. After 300 cycles of freezing and thawing, weight decrease ratio and durability factor of recycled polymer concrete were in the range of 0.13~1.42% and 94~99, respectively.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회논문집(II)
• /
• pp.713-718
• /
• 1998

This paper deals with the consistency of fresh lightweight polyester mortars as high-performance or multifunctional building materials. Fresh lightweight polyester mortars using an unsaturated polyester resin, lightweight fillers and aggregate are mixed with various mix proportions, and tested for slump-flow and slump as a measure of consistency. At 10, 20 and 3$0^{\circ}C$, the influences of mix proportioning factors on the slump-flow and slump of the lightweight polyester mortars are examined, and the empirical equations for the slump predictions are successfully proposed.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.769-774
• /
• 2002

In this study, methyl methacrylate (MMA)- modified polyester polymer concrete, in which the MMA was added to the unsaturated polyester resin, was developed for improving the early-age strength and the workability of the conventional polymer concrete, binder of which was the unsaturated polyester resin. Then the fundamental properties of the polymer concrete such as workability and strength were surveyed. The experimental results showed that the workability was remarkably improved as the MMA contents increased, and the filler-binder ratio was turned out to be important factor for the workability. Slump prediction equation was derived by the regression analysis based on MMA content and filler-binder ratio. Furthermore, early-age strength was greater when the MMA content were increased in the range of 20-40 % but the strength rather showed a tendency of decrease when the MMA content was 50 %.

• Transactions on Electrical and Electronic Materials
• /
• 제13권1호
• /
• pp.31-34
• /
• 2012

The addition of nano/micro silica into unsaturated polyester resin (UPR) results in the improvement of the electrical properties of Silica-UPR composites. The surface, volume resistivity, dielectric strength, dissipation factor and dry arc resistivity of nano silica-UPR composites were found to improve significantly. The effects of the nano and micro fillers in UPR have been evaluated. They are presented in this paper. To evaluate the electrical properties of the nano & micro composites, all the measurements were done as per the prescribed methods in ASTM. It was observed that the addition of nano silica improves the electrical properties as compared to micro silica. The better dispersion of silica particles in unsaturated polyester resin enhances the electrical properties of silica-UPR composites.

• 접착 및 계면
• /
• 제10권4호
• /
• pp.155-161
• /
• 2009

최근 자동차용 도료의 가장 큰 관심 중에 한 가지는 도장공정을 줄여 생산성 및 환경친화성을 높이는 "compact coating process"이다. 그 중에서 pre-primed 도료는 기존의 전착도료와 primer 도료를 대체하는 도료로서 각광받고 있는 기술이다. 용접이 가능한 weldable pre-primed 도료에서 가장 중요한 물성은 유연성, 내식성, 용접성 등이다. 본 연구에서는 부착성과 유연성이 우수한 polyester resin, 이를 개량하여 유연성을 극대화한 elastomeric polyester resin을 합성하였고, 내구성과 물리적 성질이 우수한 polyvinyliedene fluoride resin을 합성한 후 경화거동 및 인장물성 등을 평가하였다. elastomeric polyester resin을 사용한 도료시스템이 유연성 및 부착성 측면을 고려했을 때, pre-primed 도료시스템에 적용하기에 가장 적합하였다.

• 한국방재학회 논문집
• /
• 제4권2호
• /
• pp.29-34
• /
• 2004

철도차량의 내장재료로 사용되는 페놀수지의 laminate Panel과 sandwich panel의 화재특성을 콘칼로리미터를 이용하여 착화시간, 열방출율과 일산화탄소방출량을 비교, 조사하였다. 또한 기존 철도차량용 내장재료로 사용된 불포화 폴리에스터와 페놀수지와의 화재특성을 비교하였다. 페놀수지의 중량감소 및 열분해능을 DSC & TGA를 이용하여 측정하였다. 콘칼로미터 실험결과 착화시간, 열방출율 및 일산화탄소 생성량은 50kW 복사조건에서 더 높게 나타남을 알 수 있었으며, 동일한 복사열소건 하에서는 sandwich-페놀수지가 laminate-페놀수지보다 더 빨리 착화되었다. 기존 철도차량에 적용되었던 불포화 폴리에스터와 페놀수지와의 비교시험 결과 페놀수치의 화재성능이 발열량 및 일산화탄소 방출 모두에서 우수한 것으로 조사되었다.

• Macromolecular Research
• /
• 제12권3호
• /
• pp.282-289
• /
• 2004

We have extensively characterized the fluorescence behavior of unsaturated polyester (UP) resin in the absence and presence of a 1,3-bis-(l-pyrenyl)propane (BPP) fluorescent probe at various dynamic and isothermal cure histories by means of a steady-state fluorescence technique using a front-face illumination equipment. In addition, we explored the effect of the fluorescence intensity on the relaxation of the fluorescent probe in the UP resin by resting the dynamically and isothermally cured resin at ambient temperature and pressure for 24 h. The monomer fluorescence intensity, which has two characteristic peaks at 376 and 396nm, changed noticeably depending on the cure temperature and time and provided important information with respect to the molecular and photophysical responses upon curing. The result of the fluorescence study indicates that the increased local viscosity and restricted molecular mobility of the UP resin surrounding the BPP probe after curing are both responsible for the enhancement of the monomer fluorescence intensity. Our results also demonstrate that once the BPP probe has enough time to rearrange and become isolated prior to fluorescence, a sufficient amount of fluorescence is emitted. Therefore, we note that the fluorescence behavior of this UP resin system is influenced strongly by the relaxation process of the fluorescent probe in the resin as well as process used to cure the resin.

• 한국염색가공학회지
• /
• 제26권3호
• /
• pp.187-194
• /
• 2014

To improve the deep coloring effect of PET fabrics, the alkali treated and black dyed PET fabrics were treated with 2 kinds of low refractive compounds such as acrylic resin and silicone resin. The color depth effect of treated PET fabrics was evaluated as lightness(L) change by UV-visible spectrophotometer. As the weight loss of PET fiber treated with alkali increased, the color depth of PET fabrics increased. Lightness(L) of PET fabrics treated with deep coloring agent was lower than that of untreated PET fabrics. The optimum concentration of treated PET with deep coloring agent was 4% o.w.s. The deep coloring effect of PET fabrics treated with silicone resin was higher than one treated with acrylic resin. PET fabrics treated with silicone resin only might be more appropriate process than PET fabrics treated with acrylic and silicone resin for giving deep coloring effect for polyester fabrics.

• 한국농공학회논문집
• /
• 제58권1호
• /
• pp.19-26
• /
• 2016

This study was performed to evaluate the strength and durability properties of modified epoxy composites with waste tire chip, recycled coarse aggregate, filler and modified epoxy to improve elongation and elasticity of epoxy. Additionally, for comparing to modified epoxy and unsaturated polyester resin as a binder, unsaturated polyester resin composites were developed in the same condition. The mix proportions were determined to satisfy the requirement for the workability and slump according to aggregate size and binder content. Tests for the compressive and flexural strength, freezing and thawing and durability for 20 % sulfuric solution were performed. The compressive and flexural strength of modified epoxy composites were in the range of 34.9~61.6 MPa and 10.2~18.3 MPa at the curing 7 days, respectively. Also, the compressive and flexural strength of unsaturated polyester resin composites were in the range of 44.2~77.8 MPa and 11.3~20.8 MPa at the curing 7 days, respectively. After 300 cycles of freezing and thawing, weight decrease ratio and durability factor of modified epoxy composites were in the range of 0.8~1.9 % and 95~98, respectively. Accordingly, modified epoxy composites will greatly improve the durability of concrete.

• 한국화재소방학회논문지
• /
• 제12권4호
• /
• pp.41-49
• /
• 1998

본 연구에서는 FRP용 모재수지로 사용되는 이소프탈산계 불포화폴리에스터 수지의 난 연제 첨가에 따른 연소특성의 변화에 대하여 알아보았다. 난연제로 수산화 알루미늄 ( (AHOHh), 삼산화 안티몬(Sb203), 알루미나 분말을 사용하였다. 난연제 첨가량의 증가에 따라 수지의 경도값이 감소하였다. 수산화 알루미늄의 첨가량이 증가할수록 연소속도가 감소되었다. 삼산화 안티몬을 추가로 소량(2.5 phr) 첨가할 때 잔유물의 생성량(char yield : : 31%)이 증가되고, 연소특성이 더욱 개선되었다. 결론적으로, 난연처리를 하지 않은 수지 의 경우 다량의 화염과 연기를 발생하며 격렬히 연소하였지만 난연처리하였을 경우 자기 소화성을 가지며 화염과 연기의 양이 상당히 줄어들게 됨을 알 수 있었다.