• Textile Coloration and Finishing
• /
• 제17권3호
• /
• pp.1-7
• /
• 2005

Cationic dyeable polyester(CDP) was produced through melt blending of cationic chips having $2mol\%$ of sodium salt of dimethyl ester of 5-sulfoisophthalic acid(DMS salt) and normal polyester chips in different proportions to obtain yarns having varying amount of comonomer in the fiber. The modified polyesters showed increased moisture regain, decreased viscosity, lower softening point and improved antistatic characteristics, according to the amount of modifier. In dyeing at $100^{\circ}C$ the dyeing rate of cationic dyes with CDP fiber increased slowly than that of disperse dyes. In dyeing at $120^{\circ}C$ cationic dyes reached to equilibrium at 30min and disperse dyes at 10min. Cationic dyes in dyeing of CDP fabric have a better wash fastness compared with disperse dyes, also rubbing fastness of cationic dyes is better than that of disperse dyes. The light fastness of CDP fabric for cationic and disperse dyes is not good. The fastness of 75d/36f CDP fabric is higher than 75d/72f fabric. Solvent wicking fastness of CDP with cationic dyes is better than that of disperse dyes.

• Textile Coloration and Finishing
• /
• 제15권3호
• /
• pp.176-184
• /
• 2003

This research aimed at scrutinizing the dyeability of some solvent dyes on polyester and their light fastness to be exploited as a breakthrough in light fastness where utmost fastness is required such as ultramicrofibers and industrial markets. Dyeability on polyester was mainly evaluated by HT exhaust dyeing according to the general procedure. Light fastness has been tested by a preliminary UV test followed by HT xenon test in compliance with standard SAE J1885, 224 KJ. Fading has been determined quantitatively by evaluating the shade deviation and the strength difference between unexposed and exposed samples by means of CIELab values.

• Textile Coloration and Finishing
• /
• 제11권5호
• /
• pp.22-29
• /
• 1999

The increase in color depth of polyester fiber dyed with black disperse dyes was investigated with respect to the kinds of resins and alkali treatment. The color depth of the dyed polyester fiber increased continuously according to the concentration of resins coated onto the fabrics. The alkali treatment to polyester fiber before dyeing also enhanced the color depth. It was thought that the polyester fiber was hydrolyzed by alkali resulting micropores on the sample. And the following treatment with a resin, Jet Black T-101, to the polyester fiber increased the color depth much higher. The successive process of alkali treatment, dyeing and Jet Black T-101 treatment could give the best color depth to polyester fiber. Although the alkali treatment reduced the tensile strength of polyester fiber, the color depth of polyester fiber enhanced sufficiently within the range of practically acceptable weight loss and strength. To analyze the micropore on the polyester fiber formed by alkali treatment, nitrogen porosimeter was used. As the weight loss of polyester fiber treated with alkali increased, the BET(Brunauer-Emmett-Teller) surface area, total pore volume, and average pore size of the sample increased.

• Journal of the Korean Society of Clothing and Textiles
• /
• 제37권8호
• /
• pp.1107-1116
• /
• 2013

This study examined the use of cutinase and lipase to process cotton/polyester blend fabric. Optimum treatment conditions for cutinase and lipase were investigated for cotton/polyester blend fabric. The properties of enzyme-treated fabrics were evaluated and compared in optimal treatment conditions. In addition, the possibility to provide an enzymatic finishing on blend fabrics using mixed enzymes in a two-step process were studied. The weight loss of cotton/polyester blend fabrics with Triton X-100 was 0.8% and the dyeing property of blend fabrics with calcium chloride increased by a factor of 1.2. The use of two enzymes in combination with cutinase and lipase in the presence of auxiliaries resulted in a cotton/polyester blend fabric weight loss of 0.8%. In addition, the dyeing properties of cotton/polyester blend fabrics improved by a factor of 1.5 and the moisture regain of cotton/polyester blend fabrics improved by a factor of 1.16. However, no marked loss was observed in tensile strength. The surface morphology of cotton/polyester blend fabrics is modified through a two-enzyme treatment. The treatment of cotton/polyester blend fabrics with cutinase and lipase maintains cotton strength and improves the moisture regain of polyester fabrics.

• Journal of the Korean Society of Clothing and Textiles
• /
• 제26권10호
• /
• pp.1401-1411
• /
• 2002

To Save energy and cost one bath/one step dyeing and finishing on cotton/polyester blends is carried out with disperse dyes in the presence of crosslinking agent. Cotton 100 %, cotton/polyester 70/30, 50/50, 35/65, polyester 100 % fabrics were used. wrinkle recovery angle, tensile strength retention and tearing strength retention were determined in according to the dyebath composition, and also determined while the concentration of DMDHEU, molecular weight and concentration of PEG were varied. Colorfastness to abrasion, washing and light were tested. For cotton and cotton/polyester blends dyed in the presence of DMDHEU/PEG, wrinkle recovery was improved. Tensile strength retention and tearing strength retention were decreased, in compared with dyed fabrics without DMDHEU. Colorfastness to abrasion was good but colorfastness to washing and to light were poor for the fabrics dyed in the presence of DMDHEU/PEG.

• Journal of the Korean Society of Clothing and Textiles
• /
• 제33권7호
• /
• pp.1121-1127
• /
• 2009

This study presents an eco-friendly and one-step finishing method for modifying fiber property that reduces fiber damage in wool/polyester blend fabrics. Lipase from aspergillus oryzae is used in this experiment. The enzymatic treatment condition is optimized by measuring the relative activity of lipase depending on pH level, temperature, concentration of lipase, and treatment time. The concentration of $CaCl_2$as an activator is determined by the characteristics including whiteness, water contact angle (WCA), and dyeing property. The modified properties of lipase treated fabrics are tested for pill resistance and surface morphology. The results are described as follows: the optimum condions for lipase treatment constitute a pH level of 8.0, treatment temperature of 40$^{\circ}$$_C$, concentration of lipase at 100% (o.w.f), and a treatment time of 90 minutes. $CaCl_2$helps in raising lipase activation, and the optimum concentration is 50mM. The whiteness, wet ability, and pill resistance of lipase treated fabrics improves as compared to the control. The dyeing property of lipase treated fabrics improved by 53.5% after using the one-bath dyeing method. This means that lipase treatment can save time and cost during the dyeing process since lipase treatment modifies wool and polyester fibers. The surface of lipase treated wool fibers do not exhibit any change, however voids and cracks manifest on the surface of lipase treated polyester fibers.

• Textile Coloration and Finishing
• /
• 제13권5호
• /
• pp.41-41
• /
• 2001

In this study, synthetic fiber fabrics such as polyester, nylon 6, acrylic and acetate were dyed with indigoid vat dye. The effects of the composition of alkaline reduction, dyeing time and dyeing temperature on color strength and color fastness of the fabrics were investigated. Also the color fastnesses to wash and light of the dyed fabrics were studied. In dyeing of polyester, nylon, acrylic and acetate fiber fabrics with indigo vat dyes, it appears that these fabrics have high values of K/S up to Ig/L of sodium hydroxide and 6g/L of reducing agent. Indigo vat dyeing for synthetic fiber fabrics was verb fast, and lead to dyeing equilibrium within twenty minutes. The K/S values of dyed fabrics did not changed in dye concentration more than 10% o.w.f.. Synthetic fiber fabrics dyed with indigoid dyes had bad light fastness.

• Textile Coloration and Finishing
• /
• 제13권5호
• /
• pp.329-335
• /
• 2001

In this study, synthetic fiber fabrics such as polyester, nylon 6, acrylic and acetate were dyed with indigoid vat dye. The effects of the composition of alkaline reduction, dyeing time and dyeing temperature on color strength and color fastness of the fabrics were investigated. Also the color fastnesses to wash and light of the dyed fabrics were studied. In dyeing of polyester, nylon, acrylic and acetate fiber fabrics with indigo vat dyes, it appears that these fabrics have high values of K/S up to Ig/L of sodium hydroxide and 6g/L of reducing agent. Indigo vat dyeing for synthetic fiber fabrics was verb fast, and lead to dyeing equilibrium within twenty minutes. The K/S values of dyed fabrics did not changed in dye concentration more than 10% o.w.f.. Synthetic fiber fabrics dyed with indigoid dyes had bad light fastness.

• Journal of Sericultural and Entomological Science
• /
• 제37권2호
• /
• pp.154-160
• /
• 1995

Dyeing behavior of Silk/Cationic dyeable polyester(CDP) mixed filament was investigated by using a cationic dye. The effect of pH, temperature and additives such as carrier, levelling agent and salt were examined for each silk and CDP component of mixed filament in order to find out the optimum dyeing condition. Based on these results, the dyeing behavior was investigated for Silk/CDP mixed filaments concering various dyeing parameters. The dye adsorption was significantly changed on the dyeing temperature, carrier addition and pH of the dyebath. Specially, the dye migration phynomena were observed for a mixed filament, showing that the dyes initially observed on the surface of silk fiber migrate to the CDP component during a dyeing process. The dyeing of Silk/CDP mixed filaments accompanied by dye migration and as a result, dye adsorption can be developed only for a CDP component. Therefore, the control of dyeing temperature is most important for a Silk/CDP mixed filament, in order that both silk and CDP component are able to be dyed by a cationic dye simultaneously in one bath/one dye system.

• Journal of the Korean Society of Clothing and Textiles
• /
• 제20권6호
• /
• pp.1138-1150
• /
• 1996

This study was carried out to investigate the effects of dyeing on the mechanical properties, primary hand, total hand value (THV), and total appearance value (TAV) of woven fabrics. Cotton, PET, nylon, cotton/PET, and cotton/nylon woven fabrics were used as test specimens. Each of fabric was dyed under the same conditions as the fabrics for sportswear which consumers have selected as best. Mechanical properties of specimens were measured by KES-FB system and primary hand and THV were calculated by equation KN -201-MDY and KN-301-WINTER respectively. TAV was calculated by KN (eq. 10). The results were as follows: 1. In mechanical properties. tensile energy increased when cotton and two cotton mixture fabrics were dyed and decreased when polyester and nylon fabrics were dyed. Bending rigidity and shear rigidity decreased after all fabrics were dyed except nylon and cotton/ nylon mixture fabrics showing higher rigidities. Cotton fabrics showed higher surface roughness while other fabrics did lower values after dyeing. 2. In evaluation of primary hand and total hand , four primary hands of cotton fabrics so decreased after dyeing that THV were lowered. Numeri, Fukurami, and Sofutosa in primary hand of polyester, cotton/polyester, and cotton/nylon fabrics and Koshi and Numeri of nylon fabrics increased after dyeing and therefore THV of four fabrics were improved. 3. Cotton and polyester fabrics showed higher TAV due to their lower bending and shear rigidity, while nylon and cotton/nylon fabrics did lower values due to their higher shear rigidity. 4. It was proposed that the method of dyeing or treatment for minimizing the decrease of THV of cotton fabrics and TAV of nylon fabrics should be developed.