• Advances in concrete construction
• /
• v.5 no.4
• /
• pp.331-343
• /
• 2017

In this study a polymer concrete, made up of natural aggregates and an orthophthalic polyester binder, reinforced with natural Alfa fibers has been studied. The results of flexural testing of unreinforced polymer concrete with different rates of charges (marble) showed that the concrete with 20% of marble is stronger and more rigid compared to other grades. Hence, a rate of 20% of marble powder is selected as the optimal value in the development of polymer concrete reinforced Alfa fibers. The fracture results of reinforced polymer concrete with 1 and 2 wt% of chopped untreated or treated Alfa fibers showed that treated Alfa (5% NaOH) fiber reinforced polymer concrete has higher fracture properties than other composites. We believe that this type of concrete provides a very promising alternative for the building industry seeking to achieve the objectives of sustainable development.

• Textile Coloration and Finishing
• /
• v.9 no.6
• /
• pp.1-9
• /
• 1997

Four aminoazobenzene disperse dyes derived from different N-ethyl-N-substitutedalkylanilines and 2-chloro-4-nitroaniline, were synthesized and their chemical structure were analyzed by 500 MHz NMR spectroscopy. The wavelength of maximum absorption of the synthesized dyes, which was dependent on the electron withdrawing ability of the substituent, was in the range of 499.5~526.0nm. As terminal substituent became polar, the dyeing rate of disperse dye increased, and the exhaustion rate of dyes having cyano or hydroxy group became lower, that of the dye having acetoxy group higher. The wash fastness of polyester fabric dyed with disperse dyes possessing the polar group improved probably due to the increased dye-fiber interaction.

• Analytical Science and Technology
• /
• v.17 no.6
• /
• pp.527-531
• /
• 2004

Treatment with aqueous sodium hydroxide solution plays an important role to impart certain desirable properties - feel and luster on the surface of polyester fiber. In this process alkali wastewater contains disodium terephthalate, ethylene glycol (EG) and residual sodium hydroxide. In this paper we report a new method containing the pretreatments of derivatization with benzoyl chloride and solvent extraction using pentane. The calibration curve of EG determined by GC/MS-SIM shows a good linearity in the range of 0.1 to $25{\mu}g/mL$ having the standard deviation of ${\leq}8.7%$. The recovery and the detection limit of this method are 91.9-93.7% and $0.05{\mu}g/mL$ respectively.

• Textile Coloration and Finishing
• /
• v.4 no.4
• /
• pp.110-116
• /
• 1992

For the modification of PET surface, Perfluoropropene and Methyl alcohol were LT-plasma polymerized on the PET fabrics as thin films by means of 13.56 MHz radio frequency generator. The surface properties of PET fabrics were modified from hydrophobic to hydrophilic by application of the postplasma reaction of thin films. The evidence of the modification was identified by observation of the presence of hydroxy group in IR spectrum and the evaluation of degree of hydrophilicity was performed by measuring frictional static voltage of PET fabric with cotton fabric. For the case of modification by PFP, the result performed at the condition of 25 W, 70 m torr has shown to be effective, and for MeOH, result performed at the condition of 25 W, 100 m torr effective. The effect of hydrophilic surface modification of MeOH plasma polymer was superior to that of PFP-plasma polymer.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.12
• /
• pp.1197-1203
• /
• 2004

This study investigates the air leakage and heat transfer characteristics of a rotary-type air-to-air heat exchanger with a fiber polyester matrix. The leakage airflow rate is measured using a tracer gas method for various ventilation rates and rotational speeds of the matrix wheel. A correlation equation for air leakage is obtained by combining the pressure leakage and the carryover leakage. The pressure leakage is observed to be a function of ventilation airflow rate only, and the carryover leakage is found to be a linear function of rotational speed. The real efficiency of the heat exchanger can be obtained from its apparent efficiencies by taking into account the air leakage ratio. As the ventilation rate increases, the heat recovery efficiency decreases. As the rotational speed of the matrix increases, the efficiency increases initially but reaches a constant value for the rotational speeds over 10 rpm.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.18 no.2
• /
• pp.177-190
• /
• 2016

On-line consumer reviews are good references for consumers to evaluate and buy apparel products. The objective of this study is to facilitate communication about performance textiles between consumers and merchandisers who buy and sell apparel products on online. The survey was based on standardizing words used in consumer reviews written after purchase of summer knit t-shirts at internet shopping mall and evaluating the performance textiles including cellulose fibers. We collected reviews of five sorts of the clothing products including cotton/modal, tencel/polyurethane, polyester/rayon, linen, cotton and selected 1000 reviews related to textiles. For classifying each word used in the reviews by the performance textiles, they were quantified applying same standards. The results were as follow: First, the standard for consumer to consider importantly was tactile sensation, appearance, pilling, thickness, dimensional stability in washing. Second, the important category of performance textiles was healthy-comfort and psychological-comfort. Third, there were difference performance textiles for consumer to recognize, e.g. cotton/modal was important to air-permeability, tencel/polyurethane was noticed about tactile sensation, polyester/rayon was perceived about pilling unlike other things, linen had a problem of clothing care-convenience, then cotton was familiar fiber to important for appearance. The last, consumers usually focused on writing the most positive or negative online reviews. Although not familiar with professional terminologies, consumers are sensitive to physical properties of textiles. Therefore, standardizing and evaluating performance textiles are expected to improve satisfaction as providing objective information to consumers considering in buying apparel products at online shopping mall and increase in revenue to manufacturer.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.1
• /
• pp.98-112
• /
• 1996

Tho purpose of this study was to investigate hygienic and comfortable properties of socks. Materials are nine summer socks either frequently being worn or new products recently introduced to market. Three female and three male adults participated in this study. Through wearing experiment, the numbers of microbes on foot and sock were counted and subjective sensation was measured. The microbes were isolated and identified based on growth physiological characteristics. Nine different socks had smaller number of bacteria of sock than that of foot. The number of bacteria of sock was significantly related with that of foot in cotton socks, in piled cotton socks, in mesh cotton socks, in cotton+ nylon+ linen blended socks, in nylon socks. Total number of bacteria of tv cut finished socks was most small and total number of bacteria was increased in the order of ultra fresh finished socks, untreated cotton socks, nylon socks, cotton + nylon+ linen blended socks, mesh cotton socks, polyester+ nylcn+ linen blended socks, piled cotton socks, cotton socks. Total number of bacteria of cotton socks and piled cotton socks were significantly different from that of uv cut finished socks. Finished socks and .jocks has high air permeability had significantly small number of bacteria. Comfortable sensation in nylon socks and polyester+nylon+linen socks was significantly uncomfortable. The way socks finished and air permeability of .jocks affected theirs hygienic property, while fiber type of them affected comfortablene, is. Bacteria identified were Staphylo coccus aureus, S. au rice larir, S. cahn ii, S. ep ids midis, S. haemo Iyticus, S. h am in 2's. S.fapraphyticus, S. warnery, 1 cinetobater calcoaceticus bio. anitratus, p.reudomonas mendocina, p. paucimobilis, Flavimonas Q ryzihabitans (CDC Group VE-2), and Xanthomanas maltophina. Fungi isolated were Spicaria sp., Thrichoderma sp., Fusarium sp., Aspergillus sp., Epicoccum sp., Cladosporium sp., and Penicillium sp..

• Journal of Fashion Business
• /
• v.10 no.4
• /
• pp.151-162
• /
• 2006

This study investigated into the effects of the colors of warp and weft on the overall colors of fabrics, along with the visual changes of colors by the measuring angle of both warp and weft, by means of cross-dyeing of cotton/PET union fabrics. First, the reflectance of polyester is higher than that of cotton over the whole wavelength. Second, the dyeing of polyester uses the disperse dyes and that of cotton uses fiber-reactive dyes, the differences in the features of dyes and the reflectance of fabrics cause the same colors to be perceived different by the angle of observation. Third, the dyeing of cotton and PET fabrics individually with the same color revealed that the dyeing of cotton and PET fabrics in one bath resulted in a small difference in colors between the two fabrics than the separate dyeing in two bathes. In the case of one bath, the dyeing of PET fabrics followed by that of cotton fabrics resulted in a small difference in color than the dyeing in the reversed order. Fourth, when cotton/PET union fabrics were dyed in ten colors, the difference in colors between the two fabrics was small; and due to the difference in the density of warp and weft of union fabrics, some difference was detected in comparison with the results of separate dyeing of cotton and PET fabrics in one bath. The latter did not produce the changes in color which was recognizable with the naked eyes. Fifth, when cotton/PET union fabrics were dyed in ten colors, any color change was not observed by the measuring angle, and the inclination in the direction of warp or weft resulted in the tendency of color-deepening. In the measurement of the latter, the inclination in the direction of weft resulted in the higher color-deepening than that in the direction of warp, due to the influence of weft.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.12
• /
• pp.1591-1597
• /
• 2012

Adherend samples were made from unsaturated polyester and woven and mat glass fibers by the hand layup and vacuum methods. The mechanical properties of the adhesive, composite adherends, and terminal-joint and secondary-joint specimens were determined experimentally. Combinations of the experiment results and the bonding theory were used in this study. The maximum and average shear stresses were calculated based on the maximum tensile force and geometry parameters of the joint specimens. The results of the maximum and average shear stresses were compared and evaluated for six joints. The results showed that the grinding and grind/acetone joint had the highest strength among three types of terminal-joints. Similarly, the mat-mat and mat-woven joints had the highest strength among three types of secondary-joints with the same value. Conversely, no treatment and woven-woven bonding had very low strength. In each case, failure occurred always at two ends and then moved toward the middle area of the overlap length.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.16 no.3 s.43
• /
• pp.335-344
• /
• 1992

This study was conducted to investigate the influence of addition of cetyl trimethyl ammo­nium bromide (CTAB), and amine [ethylamine (EA) or ethylene diamine (EDA)] to aqueous sodium hydroxide (NaOH) solution on polyester alkaline hydrolysis, The experimental vari­ables such as CTAB concentration, EA or EDA concentration, NaOH concentration, tempera­ture and time were compared, and the changes in physical and chemical properties of alkaline­hydrolyzed PET fabrics depending on their treated conditions were measured, The results are as follows: 1. By adding CTAB and amine in aqueous NaOH solution, increasing effect on weight loss of PET fabrics was obtained in simultaneous addition of CTAB and EDA, but not in CTAB and EA. 2. By adding CTAB & EDA simultaneously, increasing effect on weight loss was obtained regardless of EDA concentration, time and temperature, and it was more effective at lower NaOH concentration. :l. The increase of void space (or irregularly grooved surface), of softness, of wickability, of dyeability on PET fabric, and the decrease of tensile strength, of molecular weight were observed according to the weight loss on the PET fabrics. These changes were equal to all alkaline-hydrolyzed PET fabrics regardless of addition of CTAB and amine. l. There was little changes on crystallinity, thermal behavior when PET fiber was treated with ,aqueous NaOH solution with CTAB and EDA. These results supported that increasing effect on weight loss take place without inducing of fine structural change of PET fibers.