• Biomaterials and Biomechanics in Bioengineering
• /
• 제4권1호
• /
• pp.33-44
• /
• 2019

This paper presents a novel structural composition for artificial bone scaffolds with an appropriate biocompatibility and biodegradability capability. To achieve this aim, carbon nanotubes, due to their prominent mechanical properties, high biocompatibility with the body and its structural similarities with the natural bone structure are selected in component of the artificial bone structure. Also, according to the piezoelectric properties of natural bone tissue, the barium titanate, which is one of the biocompatible material with body and has piezoelectric property, is used to create self-healing ability. Furthermore, due to the fact that, most of the bone tissue is consists of hydroxyapatite, this material is also added to the artificial bone structure. Finally, polycaprolactone is used in synthetic bone composition as a proper substrate for bone growth and repair. To demonstrate, performance of the presented composition, the mechanical behaviour of the bone scaffold is simulated using ANSYS Workbench software and three dimensional finite element modelling. The obtained results are compared with mechanical behaviour of the natural bone and the previous bone scaffold compositions. The results indicated that, the modulus of elasticity, strength and toughness of the proposed composition of bone scaffold is very close to the natural bone behaviour with respect to the previous bone scaffold compositions and this composition can be employed as an appropriate replacement for bone implants.

• 한국정밀공학회지
• /
• 제31권9호
• /
• pp.791-797
• /
• 2014

Abstract Scaffold used as a carrier of the cell has been actively conducted using plenty of technology in tissue engineering. ${\beta}$-tricalcium phosphate (${\beta}$-TCP) material has shown good biocompatibility and osteoconductive ability when it was implanted as a bone graft substitute in osseous defect in human and animal studies for bone regeneration. In this study, we fabricated the blended polycaprolactone (PCL) and ${\beta}$-TCP scaffold by the polymer deposition system (PDS). The PCL/${\beta}$-TCP scaffold was fabricated at a temperature of $110^{\circ}C$, pressure of 650 kPa, and scan velocity of 100 mm/sec. The Overall geometry and size of the scaffold were fixed circle type with a diameter of 10 mm and a height of 4 mm. PCL/${\beta}$-TCP scaffold was observed by scanning electron microscopy. Cell attachment and proliferation of the scaffold containing 30 wt% ${\beta}$-TCP was superior to those containing 10 wt% and 20 wt% ${\beta}$-TCP.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.202-202
• /
• 2011

The research of 3-dimensional (3-D) scaffold for tissue engineering has been widely investigated as the importance of the 3-D scaffold increased. 3-D scaffold is needed to support for cells to proliferate and maintain their biological functions. Furthermore, its architecture defines the shape of the new bone and cartilage growth. Polycaprolactone (PCL) has been one of the most promising materials for fabricating 3-D scaffold owing to its excellent mechanical property and biocompatibility. However, there are practical problems for using it, in vitro and in vivo; extracellular matrix components and nutrients cannot penetrate into the inner space of scaffold, due to its hydrophobic property, and thus cell seeding and attachment onto the inner surface remain as a challenge. Thus, the surface modification strategy of 3-D PCL scaffold is prerequisite for successful tissue engineering. Herein, we utilized a mussel-inspired approach for surface modification of 3-D PCL scaffold. Modification of 3-D PCL scaffolds was carried out by simple immersion of scaffolds into the dopamine solution and stimulated body fluid, and as a result, hydroxyapatite-immobilized 3-D PCL scaffolds were obtained. After surface modification, the wettability of 3-D PCL scaffold was considerably changed, and infiltration of the pre-osteoblastic cells into the 3-D scaffold followed by the attachment onto the surface was successfully achieved.

• 한국재료학회지
• /
• 제20권6호
• /
• pp.331-337
• /
• 2010

A highly porous Biphasic Calcium Phosphate (BCP) scaffold was fabricated by the sponge replica method with a microwave sintering technique. The BCP scaffold had interconnected pores ranging from $80\;{\mu}m$ to $1000\;{\mu}m$, which were similar to natural cancellous bone. To enhance the mechanical properties of the porous scaffold, infiltration of polycaprolactone (PCL) was employed. The microstructure of the BCP scaffold was optimized using various volume percentages of polymethylmethacrylate (PMMA) for the infiltration process. PCL successfully infiltrated into the hollow space of the strut formed after the removal of the polymer sponge throughout the degassing and high pressure steps. The microstructure and material properties of the BCP scaffold (i.e., pore size, morphology of infiltrated and coated PCL, compressive strength, and porosity) were evaluated. When a 30 vol% of PMMA was used, the PCL-BCP scaffold showed the highest compressive strength. The compressive strength values of the BCP and PCL-BCP scaffolds were approximately 1.3 and 2MPa, respectively. After the PCL infiltration process, the porosity of the PCL-BCP scaffold decreased slightly to 86%, whereas that of the BCP scaffold was 86%. The number of pores in the $10\;{\mu}m$ to $20\;{\mu}m$ rage, which represent the pore channel inside of the strut, significantly decreased. The in-vitro study confirmed that the PCL-infiltrated BCP scaffold showed comparable cell viability without any cytotoxic behavior.

• 대한기계학회논문집A
• /
• 제39권12호
• /
• pp.1229-1235
• /
• 2015

3D 프린터를 이한 인공지지체 제작 기술은 손상된 골 조직 재생을 위해 개발되고 있다. 골 조직 재생에 적하기 위해 인공지지체는 생체적합성, 생분해성 그리고 적절한 기계적 특성을 지녀야 하며, 분한 양의 공극과 내부 연결성을 지닌 구조로 제작되어야 한다. 본 연구에서는 3 차원 이중 공극 인공지지체를 제작하기 위해서 열 해 적층법(fused deposition modeling, FDM) 기반의 폴리머 적층 시스템을 이하였다. 사된 재료는 폴리카프로락톤(polycaprolactone, PCL)과 알긴산 나트륨(sodium alginate, SA)이다. 제작된 3 차원 형상의 인공지지체에 이중 공극을 갖기 위해 염 침출법을 이하였다. 완성된 인공지지체는 주사 전자 현미경과 X 선 검출 분광기(scanning electron microscope-energy dispersive spectroscopy, SEM-EDS)를 통해 관찰하였으며, MG-63 세포를 이하여 in-vitro 평가를 하였다.

• 대한두개안면성형외과학회지
• /
• 제19권3호
• /
• pp.181-189
• /
• 2018

Background: Autogenous bone grafts have several limitations including donor-site problems and insufficient bone volume. To address these limitations, research on bone regeneration is being conducted actively. In this study, we investigate the effects of a three-dimensionally (3D) printed polycaprolactone (PCL)/tricalcium phosphate (TCP) scaffold on the osteogenic differentiation potential of adipose tissue-derived stem cells (ADSCs) and bone marrow-derived stem cells (BMSCs). Methods: We investigated the extent of osteogenic differentiation on the first and tenth day and fourth week after cell culture. Cytotoxicity of the 3D printed $PCL/{\beta}-TCP$ scaffold was evaluated by 3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium assay, prior to osteogenic differentiation analysis. ADSCs and BMSCs were divided into three groups: C, only cultured cells; M, cells cultured in the 3D printed $PCL/{\beta}-TCP$ scaffold; D, cells cultured in the 3D printed $PCL/{\beta}-TCP$ scaffold with a bone differentiation medium. Alkaline phosphatase (ALP) activity assay, von Kossa staining, reverse transcription-polymerase chain reaction (RT-PCR), and Western blotting were performed for comparative analysis. Results: ALP assay and von Kossa staining revealed that group M had higher levels of osteogenic differentiation compared to group C. RT-PCR showed that gene expression was higher in group M than in group C, indicating that, compared to group C, osteogenic differentiation was more extensive in group M. Expression levels of proteins involved in ossification were higher in group M, as per the Western blotting results. Conclusion: Osteogenic differentiation was increased in mesenchymal stromal cells (MSCs) cultured in the 3D printed PCL/TCP scaffold compared to the control group. Osteogenic differentiation activity of MSCs cultured in the 3D printed PCL/TCP scaffold was lower than that of cells cultured on the scaffold in bone differentiation medium. Collectively, these results indicate that the 3D printed PCL/TCP scaffold promoted osteogenic differentiation of MSCs and may be widely used for bone tissue engineering.

• 한국임상수의학회지
• /
• 제33권6호
• /
• pp.332-339
• /
• 2016

Polycaprolactone (PCL) scaffold have been developed as an alternative to natural donor tissue to repair a large osteochondral defect. The objective of this study is to evaluate efficacy and biocompatibility of bilayer PCL scaffold implanted for osteochondral repair in rabbit. Twenty-two male New Zealand White rabbits were used in this animal experiment. Rabbits were divided into three groups. Experimental surgery was carried out under general anesthesia. Osteochondral defects (5 mm diameter and 5 mm deep) were made in the center of the patellar groove using a 5 mm diameter biopsy punch. In group I (3D plotting) and group II (salt-leaching), the scaffold was implanted using the press-fitted technique into the defect. In control group, after osteochondral defect was created, the defect was left without implant. After four and eight weeks, rabbits were sacrificed and the defects were evaluated by macro -and microscopical methods. There were not found animal death and severe inflammatory evidence during the experimental periods. There were no significant differences between the experimental groups in gross evaluation. However the group I scored significantly higher than group II at 8 weeks in histological evaluation (P < 0.05). The 3-D plotting PCL scaffold was more suitable method for reconstruction of osteochondral defect than a salt-leaching PCL scaffold.

• 폴리머
• /
• 제38권6호
• /
• pp.815-819
• /
• 2014

조직공학에서의 인공지지체는 세포의 부착과 증식 및 분화가 잘 되어야 하고, 우수한 생체친화성 및 생분해성을 지녀야 한다. 다양한 인공지지체 제작 방법이 시도되어지고 있으며, 최근들어 3D 프린팅 기술을 이용한 방식이 활발하게 연구되어지고 있다. 폴리카프로락톤(polycaprolactone, PCL)은 낮은 녹는점을 가지고 있어 3D 프린팅하기에 우수한 생체적합 고분자 합성재료이다. 본 연구에서는 3D 프린팅 기술을 이용하여 3차원 PCL 인공지지체를 제작하였고, 지지체의 표면개질을 위해 수산화나트륨(NaOH)을 이용하였다. 표면개질된 인공지지체의 표면특성을 SEM으로 확인한 결과, 수산화나트륨을 처리한 PCL 인공지지체가 처리하지 않은 PCL 인공지지체에 비해 거칠기가 증가함을 보였으며, 접촉각 측정을 통해 친수성이 증가함을 확인하였다. In vitro 실험결과, 수산화나트륨을 처리한 PCL 인공지지체가 처리하지 않은 PCL 인공지지체에 비해 세포의 증식과 분화가 증가함을 보였고, 세포의 부착 모습은 균일하고 밀집된 형태로 부착됨을 확인하였다. 따라서 조형가공기술을 이용하여 수산화나트륨을 처리한 표면개질된 PCL 인공지지체를 제작하고 분석함으로써, 세포적합성을 통해 체내 인공지지체 개발 적용 가능성을 제시하였다.

• 폴리머
• /
• 제32권5호
• /
• pp.458-464
• /
• 2008

생체재생용 지지체는 높은 다공구조와 적당한 기계적인 강도를 필요로 한다. 높은 다중성과 적당한 다공크기는 지지체와 주변 환경 사이에 영양분의 공급을 원활하게 하여 셀의 지지체에 대한 초기 집착력과 성장을 가능하게 하는 구조를 제공한다. 본 논문에서는 polycaprolactone(PCL) 나노섬유를 화학 발포제와 전기방사공정을 이용하여 다양한 조건하에서 제조하였다. PCL 용액의 농도가 8wt%, 발포제의 함량 0.5wt%, 발포온도 $100^{\circ}C$ 및 체류시간 2-3초에서 가공성 측면과 다공성 측면에서 우수한 발포된 나노섬유를 얻을 수 있었다. 또한 세포의 성장성을 측정하기 위하여 인체피부세포를 셀 켤츄어링하여, 발포되지 않은 나노섬유와 비교하였다.

• 폴리머
• /
• 제38권2호
• /
• pp.150-155
• /
• 2014

Polycaprolactone(PCL)은 생분해성 고분자로 인장강도, 신장률, 충격강도 등의 기계적 물성이 우수하다. $TiO_2$ (titanium dioxide) nanoparticle은 친수성으로 밀도가 높고 생체적합성이 우수하다. 본 연구에서는 PCL과 $TiO_2$(titanium dioxide) nanoparticle을 이용하여 salt-leaching방법으로 3차원 다공성 지지체를 제작하였다. 제작한 지지체를 FESEM, FTIR, TGA, 압축강도 측정 등을 통해 물성을 분석하였다. $TiO_2$ nanoparticle에 의해 물흡수도와 팽윤도는 감소하였으나 압축강도는 증가하였다. CCK-8 assay를 통해 세포의 증식률을 확인한 결과, $TiO_2$ nanoparticle에 의한 세포 독성은 없는 것으로 확인되었다. 이러한 연구결과는 PCL/$TiO_2$ nanoparticle 지지체의 생체재료로 사용가능성을 제시하였다.