• 한국환경과학회지
• /
• 제16권8호
• /
• pp.891-896
• /
• 2007

Waterborne polyurethane dispersions (WPUD) were prepared by poly(ethylene glycol) adipate as the polyester type, ${\alpha},{\omega}-hydroxyalkyl$ terminated polydimethylsiloxane (PDMS-diol) as the polysiloxane type, hexamethylene diisocyanate, and isophorone diisocyanate, dimethylol propionic acid. The effects of PDMS-diol contents on the particle size, thermal and surface properties of WPUD were investigated. The structures of the synthesized WPUD were confirmed using by FT-IR. The surface, thermal and mechanical properties were investigated by measuring the contact angles, DSC, TGA and UTM. As PDMS-diol contents increased, the particle size, the contact angle, and the elongation was increased, while the tensile strength was decreased. Also the thermal stabilities of the synthesised WPUD were increased as PDMS-diol contents increased.

• Elastomers and Composites
• /
• 제34권4호
• /
• pp.285-291
• /
• 1999

Effects of catalysts on network structure, hard segment length and distribution of polyurethane foams in the absence of catalysts were investigated. CFC free all MDI-based poly urethane foams were prepared from poly(ethylene adipate)glycol, 4,4'-diphenylmethane diisocyanate, and water. Amino catalysts used were 1,4-diazabicyclo[2,2,2]octane(DABCO), N, N,N',N'-tetramethyl--hexane-1,6-diamine(MR), bis(2-methylamino ethyl)ether(ET), 1,8-diazabicyclo-[5,4,0]-undecene-7(DBU). Dibutyltindilaurate(DBTL) as control was also used. Hard segment components of polyurethane foams were obtained by a selective degradation of polyester chains with 0.01N KOH-methanol solution. The PUFs with DBU catalyst contained more amount of isocyanurate components than other PUFs. On the other hand, the PUFs with ET, MR, DBTL catalysts contained more amount of allophanate and biuret component than the other PUFs.

• 공업화학
• /
• 제8권2호
• /
• pp.230-236
• /
• 1997

Isophorone diisocyante(IPDI), 각각 에스터와 에테르 타입의 폴리올인 poly[butyl/ethylene adipate] glycol(PBEAG), poly[oxytetramethylene] glycol(PTMG)과 잠재적 음이온기인 dimethylol propionic acid(DMPA)로부터 음이온성 폴리우레탄 분산체(PUD)를 제조하였다. 폴리올의 종류 및 조성이 PUD의 유화 입경과 건조 필름의 기계적, 열적 성질에 미치는 영향 등을 검토하였다. 혼합된 폴리올의 조성 변화 시, PTMG 함량이 증가할수록 PUD의 유화 입경은 점근적으로 증가하는 경향을 보였고, 인장 강도는 완만한 감소를 나타내다가 증가하였다. 이는 두 폴리올간의 상용성이 적기 때문에 나타나는 결과로 해석되며, 이러한 비상용성은 DSC분석을 통하여 유리전이온도(Tg) 측정으로부터 확인할 수 있었다.

• 한국염색가공학회지
• /
• 제28권1호
• /
• pp.40-47
• /
• 2016

As a coating material for loudspeaker dampers, resilient polyurethane/epoxy hybrid resins were synthesized to replace conventional phenol resin and examined the physical properties, which are not only environmentally friendly but also not harmful to human. Five types of polyurethane resins were synthesized in the step-shot method using methylene diisocyanate, three polyols such as poly tetramethylene ether glycol(PTMEG, MW:2000), poly(1,4-buthylene adipate(PBAP, MW:2000), and poly carbonatediol(PCD, MW:2000), and three chain extenders such as ethylene glycol(EG), neopentyl glycol(NPG), and 1,4-buthandiol(1,4-BD). The five types of synthesized polyurethane resins and commercially available bisphenol A type epoxy resin were blended in weight ratios of 90:10, 70:30, and 50:50 to synthesize 15 types of polyurethane/epoxy hybrid resins. Among the polyurethane resins, the one that was synthesized using PCD and 1,4-BD showed excellent tensile strength, 100% modulus, low extension, and relatively high viscosity. Polyurethane/epoxy hybrid resins with higher epoxy resin contents showed better thermal properties and water resistance while those with higher polyurethane contents showed higher flexibility. The polyurethane/epoxy hybrid resin made by blending the polyurethane based on PCD and 1,4-BD with a bisphenol A type epoxy resin in a weight ratio of 70:30 was identified to be the most suitable to be used in speaker dampers.

• 한국의류산업학회지
• /
• 제3권1호
• /
• pp.42-47
• /
• 2001

The hardening system of polyurethanes has usually caused by air pollution. bad working condition and fire hazard according to using orgarnic solvents. Therefore there have been researched on emulsion, water soluble and colloid-dispersion based water soluble instead of using organic solvents recently. This study synthesized polyurethane dispersing particle by means of mixing precursor and neutralized emulsion method. In the first step, polyurethane was preparated from isophorone diisocyanate and poly (ethylene-adipate) glycol, and got precursor by introducing dimethyl propionic acid as a hydrophilic group. Synthesized polyurethane was bonded to the surface of fiber and crosslinked as a anti-static agent, and then looked for the change of color and softening property.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.203-203
• /
• 1999

Mass spectrometry technique provides the molecular weight distribution, data on the sequence of repeat units, polymer additives, and impurities, and structural information. time-of-Flight secondary Ion Mass Spectrometry (TOF-SIMS) has been used for structural characterization of various polymers1-2. the masses of repeat units and terminal groups and molecular weight distributions of polymers have been determined from their TOF-SIMS spectra. TOF-SMIS provides good sensitivity and structural specificity for high mass ions so that intact oligomers and large polymer fragments are observed. In this study, we investigated the detailed structural information on the oligomers and fragment ions of branched poly(1,3-butylene adipate) and branched poly[di(ethylene glycol) adipate] and the transesterification products of branched polyesters with trifluoroacetic acid or chloro difluoroacetic acid. Branched polyesters were chosen because they are important polymers but difficult to characterize; thus branched polyesters provide challanging test for TOF-SIMS. TOF-SIMS spectra of polyesters are obtained from thin polymer films cast from solution on a silver substrate. A good solvent for a polumer solution disrupts intermolecular forces between polymer chains but leaves the polumer intact. Transesterification reactions are potentially useful for characterization of high molecular weight and intractable polyesters. Transesterification products of polyesters and trifluoroacetic acid or an integral number of polyester repeat units and an additional diol. The progress of such reactions was monitored using peak intensities of reactants and products in TOF-SIMS spectra. The increasing abundance of tagged ions indicates that the reaction has progressed with time.

• 공업화학
• /
• 제7권2호
• /
• pp.341-349
• /
• 1996

폴리우레탄 수지의 염색성을 향상시키기 위하여 염착좌석을 갖는 저분자량의 디올류를 쇄연장제로 활용하였다. 쇄연장제와 폴리올의 종류를 변화시키고, 또한 하드세그멘트 (HS)/소프트세그멘트 (SS) 비율을 변화시키면서 폴리우레탄 수지를 합성하였다. HS/SS가 1.4이고, dimethylolpropionic acld(DMPA), N-butyldiethanolamine(BDEA)를 염착좌석용 쇄연장제(DCE)로 활용한 경우 반응의 불균일성으로 인하여 기계적 물성이 좋지 못하였으며, 특히 에스테르계 폴리올인 poly(butylene/ethylene adipate) glycol(PBEAG)로 합성한 경우 내가수분해성이 현저히 저하되었다. 그러나 DCE로 N-methyldiethanol amine(MDEA)를 사용하고 HS/SS를 1.3으로 조절한 경우 기계적 물성과 염색성이 향상되었으며, MDEA를 선형 쇄연장제(CE)인 1,4-butanediol(1,4-BD)과 에테르형 폴리올인 poly[oxyteramethylene] glycol(PTMG)과 반응시킨 경우 기계적 물성과 내가수분해성이 현저하게 향상되었다. 특히 분자설계적 측면에서 DCE를 HS와 SS내의 배분과 1,6-hexanediol(1,6-HD) 및 neopentylglycol(NPG)과의 공쇄연장으로 초기탄성률, 인장강도, 신장률을 제어 할 수 있음을 알 수 있다.