• 제목/요약/키워드: Pollutants load

검색결과 312건 처리시간 0.029초

양식계 오염원 배출량 산정을 위한 원단위 설정 (Evaluation of Pollutant Load Unit Factor for Calculating Pollutants Emission in Aquacultural Farms)

  • 박재홍;박배경;류덕희;이재관
    • 한국물환경학회지
    • /
    • 제29권5호
    • /
    • pp.656-665
    • /
    • 2013
  • This research was conducted to investigate pollutant load unit factor from aquacultural farms. Pollutant load unit factors were investigated on the 13 kinds of fish type, i.e., Trout, Leather Carp, Eel, Carp, Cartfish, Freshwater Eel, Crucian Carp, Colored Carp, Sturgeon, Marsh Snail, Sweetfish, Pond Snail, Eriocheir Sinensis. Water qualities in aquacultural farms were investigated wide range of values by fish type and pollutant items. High BOD and COD values were observed at the Leather Carp (Ponded water system), Cartfish (Ponded water system) and Freshwater Eel (Recirculating System). TOC and DOC values were relatively high at the Freshwater Eel (Recirculating System) and Eriocheir Sinensis (Extensive). Eel (Ponded water system) and Freshwater Eel (Recirculating System) produced high concentrated nutrient pollutants, i.e., T-N, T-P. Pollutant load unit factors are dependent on fish type, aquacultural type, water quality items, etc. If some fishes have similar basic unit values, those could be applied for TMDLs as a group of fish having same pollutant load unit. The water quality concentrations of post treatment facilities' (mainly reservoir tank) effluent were higher than those of fish raising bath because of extracting pollutant from sediment in the reservoir tank. Therefore, it needs to the management and regulations about post treatment facilities.

유량변화와 지류유입에 따른 금강의 수질 변화 (Influence of River Discharge Fluctuation and Tributary Mixing on Water Quality of Geum River, Korea)

  • 심무준;이수형
    • 한국물환경학회지
    • /
    • 제31권3호
    • /
    • pp.313-318
    • /
    • 2015
  • To study the influence of changes in river discharge on water quality of the main stem of the Geum River, we investigated variation of inflow load from tributaries with river discharge. We also studied the mixing behavior of pollutants during mixing of waters of the main stem and Gap Stream. For this study, we collected water quality data such as suspended solids (SS), biochemical oxygen demand (BOD), chemical oxygen demand (COD), total organic carbon (TOC), total nitrogen (TN) and total phosphorus (TP) representing pre-monsoon, monsoon, and post-monsoon events of 2013 from a website of Water Information System. Based on inflow load, the Gap and Miho streams may be ones of tributaries which may largely influence water quality of main stem in upper river region. The Suksung and Nonsan Streams seemed to further affect water quality downstream. Results of modified EMMA indicated SS and TP may have another source(besides Gap Stream) at pre-monsoon, monsoon, and post-monsoon period. In contrast, TN and organic matter (BOD, COD, TOC) were conservative at pre-monsoon and post-monsoon. However, when river discharge increased, these pollutants may also came from unspecified non-point sources. Therefore, we need to attempt to find non-point sources for the pollutants in the main channel of upper Geum River region.

도시지역 토지이용에 따른 비점원 오염물질 유출특성 (Stormwater Runoff Characteristics of Non-point Source Pollutants according to Landuse of Urban Area)

  • 정동환;신동석;류덕희;정동일
    • 환경영향평가
    • /
    • 제16권6호
    • /
    • pp.525-532
    • /
    • 2007
  • In order to establish and implement the total maximum daily load (TMDL) management plan in Korea, it is necessary to set the source units and calculate discharge loads for non-point source pollutants such as BOD, COD, SS, TN and TP. This study analysed the corelation between stormwater runoff characteristics and event mean concentrations (EMCs) of non-point source pollutants. As the result of the corelation analysis, we knew that all the antecedent dry days (ADD) and the rainfall correlated lowly with non-point source pollutants in the urban areas such as resident area, industrial area, business area, road area and parking area. Therefore, it is necessary to get all samples from stormwater starting point to stormwater ending point and standardize the sampling method of stormwater in order to obtain more accurate EMCs for landuse.

토지이용별에 따른 초기강우 유출량의 비점오염물 특성 분석 (Nonpoint Pollutants Sources Characteristics of Initial Surface Runoff on the Land Use Types)

  • 최윤영;정세영;최정우
    • 한국환경과학회지
    • /
    • 제20권3호
    • /
    • pp.417-426
    • /
    • 2011
  • This study was conducted to investigate runoff characteristics of non-point pollutants source at the urban and rural zones in sangju area. The monitoring was conducted with seven events for ten months and Event mean Concentration(EMC) and First Flush Effect(FFE) of SS and BOD were calculated on the result of the water quality parameters. During rainfall event, the peak concentrations of SS and BOD were observed after 3~4 hours of rainfall in rural areas. Whereas, the peak concentrations occurred within 1~2 hours after rainfall and then the highest concentration of NPS pollutants sharply decreased, showing strong first flush effect in urban areas. The cumulative load curves for NPS pollutants showed above the $45^{\circ}$ straight line, indicating that fist flush effect occurred in urban areas. The mean SS EMC values of rural areas ranged from 0.9~3.3mg/L, it was higher value when compare to urban areas. While the mean BOD values of urban areas were shown the highest values.

논으로부터 배출되는 영양물질 오염부하량 원단위 산정 방법 개선 방안 검토 (Improvement Measures of Pollutants Unit-Loads Estimation for Paddy Fields)

  • 정재운;윤광식;최우정;최우영;주석훈;임상선;곽진협;이수형;김동호;장남익
    • 한국물환경학회지
    • /
    • 제24권3호
    • /
    • pp.291-296
    • /
    • 2008
  • Pollutant unit load developed by Ministry of Environment (MOE) in 1995 has been a tool commonly used for water quality management and environmental policy decision. In spite of the convenience of the method in application, the shortcoming of the method has been criticized especially for nonpoint source pollution from paddy field. In this paper the estimation procedures of pollutant unit load from paddy field in the major river basins (Han, Nakdong, Geum, and Youngsan river) were investigated, and some suggestions of improvement measures of the unit-load estimation were made. The investigation showed that the distributions of rainfall, run-off, and run-off ratio, which are the most important factors affecting discharge amount of pollutants, were not similar among river basins. Such differences seemed to result in a greater unit loads estimation at Han river and at Nakdong river watersheds compared to the others. Therefore, it is not likely to be rationale to compare unit load among the watersheds without consideration of such differences. We conclude that estimation of unit-load through an intensive monitoring of pollutant discharge is crucial for better estimation of unit-load. When such an intensive monitoring is not easy due to labor and expense restriction, we suggest that unit-load should be estimated based on the storm-events which is a representative rainfall-runoff event of the area.

금강유역 산업계 특정수질유해물질 배출현황에 대한 탐색적 데이터 분석을 통한 전국오염원조사 결과 적합성 평가 (Quality Assessment of the Nationwide Water Pollution Source Survey Results on the Prioritized Toxic Water Pollutants from Industrial Sources in the Geum-River Basin by Exploratory Data Analysis)

  • 김은아;김연숙;김용석;류덕희;정제호
    • 한국물환경학회지
    • /
    • 제30권6호
    • /
    • pp.585-595
    • /
    • 2014
  • The temporal trends of the prioritized toxic water pollutants generated and discharged from the industrial facilities in the Geum-River basin, Korea were analyzed with the results of the nationwide Water Pollution Source Survey conducted in 2001 - 2012. The statistical results indicated rapid increase in the volume of raw toxic wastewaters whereas the amount of each toxic pollutant kept fluctuating for 12 years. Serious discrepancies in the survey data of the same type of industries demonstrated a low reliability of the survey result, which stemmed from several error factors. A unit-load for each type of industrial facility was devised to estimate the amount of prioritized toxic water pollutant based on the total volume of industrial wastewater generated from the same type of industrial facilities. The supplementary measures with an effective permit issuance policy and adding survey parameters of terminal wastewater treatment plants to use them as references to the Water Pollution Source Survey were suggested as means to minimize the errors associated with the false reports from the industries.

식생여과대내 침투능력 향상에 따른 오염물질 저감효과에 대한 실험 (Experiment for Reduction Effectiveness of Pollutants with the Improvement of Infiltration Ability in Vegetation Filter Strip)

  • 이영아;최이송;오종민
    • 한국수자원학회논문집
    • /
    • 제40권2호
    • /
    • pp.183-190
    • /
    • 2007
  • 본 연구에서는 식생여과대에 있어서 토양층의 역할에 주목하였으며, 토양 침투량이 증가될 수 있는 구조로 토양층을 변형하여 일반적인 식생여과대에서의 오염저감효과와 비교 분석하였다. 따라서 연구의 최종 목적은 토양층 변화를 통한 식생여과대의 수질개선효과를 일반적인 토양층으로 구성된 식생여과대와 비교, 검토함으로써 보다 효과적인 식생여과대를 조성하고자 하는 것이다. 실험분석 결과, 토양층 변화를 접목시킨 식생여과대는 일반 식생여과대에 비해 표면유출에서 높은 오염물질 저감효과가 있는 것으로 나타났다. 이는 표면유출수 일부가 정류벽을 통과한 후 재상승하여 표면으로 유출되었기 때문으로 판단된다. 그러나 계단형에서의 하부유출수의 경우, 입경이 큰 모래와 자갈을 통과하여 유출이 일어나기 때문에 직선형 식생여과대보다 오염저감효율은 다소 낮게 나타났다. 이를 오염물질 유출부하량의 개념으로 파악해 보면, 하부유출량이 전체 유출유량에 대한 기여도가 계단형(4%)에서 직선형(2%)보다 높기 때문에 계단형에서의 오염물질 저감부하량이 직선형에 비하여 매우 높게 나타났다. 따라서 정류벽과 표면층 변화를 통해 침투량을 증가시킨 식생여과대는 일반적인 식생여과대보다 저감효과가 크고 식생여과대 적용에 필요한 여러 조건(토양의 침투성, 여과대의 넓이 및 길이, 유속 등)을 만족하지 않더라도 충분한 저감효과를 발휘할 수 있을 것으로 기대된다.

도로 유형별 비점오염원 유출특성 분석 (Analysis of Nonpoint Sources Runoff Characteristic by Road Types)

  • 윤영삼;권헌각;이윤정;유재정;이춘식;이재관
    • 한국환경과학회지
    • /
    • 제19권11호
    • /
    • pp.1375-1384
    • /
    • 2010
  • Growth in population and urbanization has progressively increased the loading of pollutants from nonpoint sources as well as point sources. Especially in case of road regions such as city trunk road, national road and highway are rainfall and pollutants runoff intensive landuses since they are impervious and emit a lot of pollutants from vehicle activity. This research was conducted to investigate the nonpoint sources concentration and quantifying stormwater pollutants which are contained in rainfall runoff water. Three different monitoring sites in Jinju and Changwon city were equipped with an automatic rainfall gauge and flow meter for measuring rainfall and the volume of rainfall runoff. In the case of average EMC value, city trunk road was shown the highest value in target water quality items like as BOD, COD, SS, TN and TP. Or the amount of runoff loads by water quality items showed the highest value in city trunk road. And runoff load in city trunk road was 43.8 times high value compared to highway by value of city trunk road $356.7 mg/m^2$, highway $8.150 mg/m^2$, national road $19.99 mg/m^2$ in the case of BOD.

오염물질에 따른 HFIX 절연전선 피복의 특성 변화에 관한 연구 (Characteristics of HFIX Insulated Wire Sheaths Contaminated by Pollutants)

  • 최수길;남영재;진세영;김시국
    • 한국화재소방학회논문지
    • /
    • 제34권3호
    • /
    • pp.8-17
    • /
    • 2020
  • 본 논문은 오염물질에 따른 HFIX 절연전선 피복의 특성변화에 관한 연구이다. HFIX 절연전선 피복을 오염시키기 위해 전선의 내수성시험 항목인 KS C IEC 60811-1-3 규격을 인용, 오염물질을 선정하고 선정된 오염물질에 시료를 노출시켜 주차 별 최대 4주간 노출된 실험시료를 제작하였다. 그 후 주차 별 시료들을 대상으로 최대인장하중 및 신장률을 측정하였다. 오염노출 기간이 길어짐에 따라 최대인장하중이 상온시료의 경우 6.22%, 고온시료 6.52%, 방청윤활제 19.94% 감소하였고, 신장률 또한 급격하게 감소하여 피복 특성저하가 뚜렷하게 나타났다. 추가적인 주사전자현미경을 이용한 표면 분석결과 오염기간이 길어짐에 따라 천공, 갈라짐, 용융 등의 구조 변경 현상이 발생되어 기계적 특성이 감소되는 것으로 나타났다. 따라서 절연전선의 성능저하를 방지하기 위해 검사주기 및 보수시기의 마련이 필요할 것으로 생각된다.

폐수 처리용 고전압 나노 펄스 발생기 (High Voltage Nano-Pulse Generator for Industrial Waste Water Treatment)

  • 장성덕;손윤규;오종석;권오정
    • 한국산업융합학회 논문집
    • /
    • 제4권3호
    • /
    • pp.311-318
    • /
    • 2001
  • The application of a pulsed power system is being extended to a environmental and industrial fields. The non-dissolution waste water pollutants from industrial plants can be processed by applying high voltage pulses with a fast rising time (a few nanoseconds) and short duration (nano to microseconds) in a pulsed corona discharge reactor. The nano-pulse generator with a magnetic switch has been developed. Its corona current in load can be adjusted by pulse width and repetition rate. we investigated the performance of the nano-pulse generator using the dummy load which is composed of resistor and capacitor equivalent to the actual reactor. This paper descibes the electrical characteristics of the nano-pulse generator that produces a 300 ns pulse at maximum repetition rate of 400 pps with a voltage of 40 kV across a $640{\Omega}$ load. In this paper we briefly discuss a configuration of system and test results.

  • PDF