• Journal of Power Electronics
• /
• 제16권3호
• /
• pp.1110-1121
• /
• 2016

The mathematical model of a three phase PWM converter under the stationary αβ reference frame is deduced and constructed based on a Proportional-Resonant (PR) regulator, which can replace trigonometric function calculation, Park transformation, real-time detection of a Phase Locked Loop and feed-forward decoupling with the proposed accurate calculation of the inductance voltage vector. To avoid the parallel resonance of the LCL topology, the active damping method of the proportional capacitor-current feedback is employed. As to current vector error elimination, an optimized PR controller of the inner current loop is proposed with the zero-pole matching (ZPM) and cancellation method to configure the regulator. The impacts on system's characteristics and stability margin caused by the PR controller and control parameter variations in the inner-current loop are analyzed, and the correlations among active damping feedback coefficient, sampling and transport delay, and system robustness have been established. An equivalent model of the inner current loop is studied via the pole-zero locus along with the pole placement method and frequency response characteristics. Then, the parameter values of the control system are chosen according to their decisive roles and performance indicators. Finally, simulation and experimental results obtained while adopting the proposed method illustrated its feasibility and effectiveness, and the inner current loop achieved zero static error tracking with a good dynamic response and steady-state performance.

• 한국정밀공학회지
• /
• 제26권6호
• /
• pp.81-89
• /
• 2009

Dancer systems are typical equipment for attenuation of tension disturbances. Lately, demands for high speed roll-to-roll machines are rising but it is prior to attenuate the tension variation on the web entering into the printing zone to achieve the speed increment. Maintaining a constant tension before the first printing cylinder is the key of high speed, high quality printing. Dancer has been researched in two ways, whether it is controlled or not. The first one is active dancer and the other one is passive dancer. In the active dancer, a position of idle roll of dancer is measured and the roll is moved by external hydraulic cylinder to control tension disturbances. While the passive one composed with spring, damper and idle roll has no external actuator to position the idle roll. The tension disturbance causes movement of dancer roll and the displacement of the roll regulates the tension variation. On the other hand a composite type of dancer is applied for roll-to-roll printing machines. It has same apparatus as passive dancer. The displacement of roll is measured and front(or rear) driven roller is controlled to position the roll. In this paper, it is presented an analysis of pendulum dancer including position feedback PI control and logic for PI gain tuning in roll-to-roll machines. Pole-zero map and root locus with varying system parameters gives a design method for control of the dancer.

• 한국전자파학회논문지
• /
• 제24권11호
• /
• pp.1055-1063
• /
• 2013

저 잡음 증폭기는 RF 수신단의 필수적인 요소이며, 다양한 무선시스템에서 사용하기 위하여 넓은 주파수 범위에서 동작하도록 요구된다. 전압 이득, 반사 손실, 잡음 지수, 선형성과 같은 중요한 성능지표들을 신중히 다루어서, 제안하는 LNA의 주요한 성능으로 역할을 하게끔 한다. Buffer 단에서 peaking 인덕터를 사용하며 전체적으로 cascade 구조로써 inductive shunt feedback을 LNA 입력 단에 성공적으로 적용하였다. 광대역 정합 주파수를 얻기 위한 설계식은 상대적으로 간단한 회로구성을 통해 도출된다. 입력 임피던스의 주파수 응답 분석을 위하여 pole과 zero를 광대역 응답을 실현하기 위한 특성으로 기술하였다. 입력 단에 게이트와 드레인 사이의 인덕터는 출력의 3차 고조파를 감소시킴으로 선형성을 크게 향상시킬 수 있다. 제안하는 회로를 $0.18{\mu}m$의 CMOS 공정으로 제작하였고, Pad를 포함한 광대역 LNA의 칩 면적은 $0.202mm^2$이다. 측정 결과는 1.5~13 GHz에서 입력손실은 -7 dB 이하이고, 전압 이득은 8 dB 이상이며, 잡음 지수는 6~9 dB 정도이다. 그리고 IIP3는 8 GHz에서 2.5 dBm이며, 1.8 V 전압에서 14 mA 전류를 소모한다.