• Journal of Ocean Engineering and Technology
• /
• v.30 no.4
• /
• pp.327-333
• /
• 2016

Reinforced concrete structures have found wide usage in land and maritime applications. However, the corrosion of reinforced concrete has been recognized as a serious problem from economic and safety standpoints. In previous studies, the corrosion behavior of the inner steel bar embedded in mortar (W/C: 0.4, 0.5) was investigated using electrochemical methods. In this study, multiple mortar test specimens (W/C: 0.6) with six different cover thicknesses were prepared and immersed in flowing seawater for five years. Subsequently, equations related to the cover thickness, period of immersion, and corrosion characteristics of the embedded steel bar were evaluated using electrochemical methods. Prior to immersion, the corrosion potentials indicated an increase with increasing cover thickness, and after five years, all corrosion potentials demonstrated a trend in the positive direction irrespective of the cover thickness. However, the relationships between the corrosion potential and cover thickness were not in complete agreement. Furthermore, after five years, all of the corrosion potentials indicated values that were nobler compared to those obtained prior to immersion, and their corrosion current densities also decreased compared to their values obtained prior to immersion. It was considered that the embedded steel bar was easily corroded because of the aggression of water, dissolved oxygen, and chloride ions; a higher W/C ratio also assisted the corrosion process. The corrosive products deposited on the surface of the steel bar for five years cast a resistance polarizing effect shifting the corrosion potential in the nobler direction. Consequently, it was considered that the W/C ratio of 0.6 showed nearly same results as those of W/C of 0.4 and 0.5. Therefore, the corrosion potential as well as various parameters such as the cover thickness, period of immersion, and W/C ratio must be considered at once for a more accurate evaluation of the corrosion property of reinforced steel exposed to marine environment for a long period.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.19 no.1
• /
• pp.69-74
• /
• 2005

In Oriental medicine the primordial Qi and the defensive Qi are considered as important for immunity. Therefore it is anticipated that the improvement of the primordial Qi and the defensive Qi can enhance the ability of immune cells. This experiment was conducted to investigate how Ginseng Radix, Astragali Radix, Atractylodis Rhizoma Alba, Glycyrrhizae Radix, representative of Qi tonifying herbs, affect the immune system in terms of controlling and balancing immune cells. Using the MTS assay, increased proliferations were observed from herbal treated cells, among which Gins-eng showed the highest proliferation. When splenocytes were activated with anti-CD3 plus herbal extracts, levels of IFN-g and IL-4 were increased but those of IL-2 showed little change compared with the control cells. Levels of IL-2, IFN-g and IL-4 were increased in purified CD4 T cells when activated with anti-CD3/anti-CD28 but at $100\;{\mu}g/ml$ of Astragali and Atractylodis, levels of IL-2 were decreased by 11% and 42%, respectively and those of IFN-g were decreased by 55% and 12%, respectively. Under Th1/Th2 polarizing conditions, levels of IFN-g in Th1 cells treated with herbal extracts were all decreased but when it comes to IL-4, its levels were increased in Ginseng and Glycyrrhizae treated cells but decreased in Astragali and Atractylodis treated cells. Taken together, the data show that compared with other qi tonifying herbs, Ginseng and Glycyrrhizae have a tendency to favor Th2 cell differentiation in vitro.

• Journal of Labour Economics
• /
• v.40 no.1
• /
• pp.1-36
• /
• 2017

This study aimed to analyze influencing factors to increase the wage differential between large enterprise and subcontracted small-medium enterprises by using panel data composed of 19 manufacturing industries for 16 years from 1999 to 2014. According to the results of analysis, in large enterprises the elasticity of substitution between the labor inputs and the subcontracted product supplies from small-medium enterprises was significantly less than 1. So, the increase in wages of workers of large enterprises, whose degree of employment protection was relatively high, seemed to increase the share of wage cost in total cost and was resulted to decrease the cost share of subcontracted product supplies significantly. This was interpreted to be able to exert a negative influence upon the price of subcontracted product supplies and the wages of workers in subcontracted small-medium enterprises, and, therefore, to increase the wage differentials between large enterprises and subcontracted small-medium enterprises. Furthermore, it was also found that the increases in the labor union participation rate at large enterprises and the openness rate of the industry concerned were contributing to make such effects much stronger significantly. In order to mitigate the wage differentials and the polarizing trend in labor market, we can suggest to establish a certain kind of flexible wage system and to introduce co-bargaining practices with the workers of subcontracted small-medium enterprises within large enterprises, and also for the workers of small-medium enterprises, to prepare new social systems to upgrade their human resources and job skills drastically.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.4
• /
• pp.662-670
• /
• 2008

The purpose of this in vitro study was to evaluate the effect of fluoride containing adhesive film on prevention of enamel demineralization. Eighty bovine enamel blocks were divided randomly into 4 groups of 25: (1) APF gel applied ; (2) CavityShield$^{TM}$ applied; (3) 3% fluoride film applied; (4) 5% fluoride film applied; Early caries lesions were produced by placing each specimen into demineralization solution at pH 4.0 for 72 hours. Then lesion of the surface microhardness were measured by the Vicke's hardness test and the lesions depth were measured by polarizing light microscope. The results of the present study are as follows: 1. Difference of microhardness value ($M{\pm}SD$) between control and experimental side was the highest in group II, followed by group IV, III, I but, no significant difference was between group II, III and IV. 2. Difference of mean lesion depth ($M{\pm}SD$) between control and experimental side was the highest in group II, followed by group III, IV and I but no significant difference was between group III and IV. The results of the present study indicate that the fluoride film application is more effective than APF gel and is similar to fluoride varnish application for prevention of dental caries.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.25 no.2
• /
• pp.423-435
• /
• 1995

The purpose of this study was to observe the effect of TGF-βl, which promotes differentiation and proliferation of osteoblasts, on bone regeneration. Experimental bone defects that measured 3 mm in diameter were created on the mandibles of guinea pig by removal of bone with the use of trephine burs. In one side of mandibular body, the experimental groups, bone defects were grafted with Biogran(Orthovita Co., U.S.A) and TGF-β1(R&D System Co., U.SA). In the remaining side of the mandiblar body, the control groups, bone defects were grafted with only Biogran. Guinea pigs in the control and experimental groups were serially terminated by fours on the 3 days, the 1 week, the 2 weeks, the 3 weeks, and the 4 weeks after experiment, and both sides of the mandibular bodies were removed and fixed with 10％ neutral formalin. They were decalcified and embedded in paraffin as using the usual method. The specimen sectioned and stained with hematoxylin and eosin. Also, they were radiographed with a soft X -ray apparatus. The obtained results were as follows; 1. Hemorrhagic condition, observed in the granulation tissues, disappeared on the 1 week after experiment in both groups, and more prominent in the experimental group. The granulation tissues of the experimental group had larger number of cells than those of the control group. 2. Osteoblastic differentiation in the margin of grafted material and adjacent bone was observed on the 1 week after experiment in both groups. Also, bone formation was observed in immature form on the 1 week after experiment. and more prominent in the experimental group. 3. In the polarizing microscopic examination, bone matrix was very loose on the 1 week after experiment, but increase in density with time, and more prominent in the experimental group. 4. In the microradiographic examination, newly formed bone was observed in the experimental group on the 2 weeks after experiment, and this was observed earlier than in the control group. Newly formed bone was increased with time and defected area was markedly decreased on the 4 weeks after experiment.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.8
• /
• pp.253-263
• /
• 2013

Frequency Scanning Interferometry(FSI) system, one of the most promising optical surface measurement techniques, generally results in superior optical performance comparing with other 3-dimensional measuring methods as its hardware structure is fixed in operation and only the light frequency is scanned in a specific spectral band without vertical scanning of the target surface or the objective lens. FSI system collects a set of images of interference fringe by changing the frequency of light source. After that, it transforms intensity data of acquired image into frequency information, and calculates the height profile of target objects with the help of frequency analysis based on Fast Fourier Transform(FFT). However, it still suffers from optical noise on target surfaces and relatively long processing time due to the number of images acquired in frequency scanning phase. 1) a Polarization-based Frequency Scanning Interferometry(PFSI) is proposed for optical noise robustness. It consists of tunable laser for light source, ${\lambda}/4$ plate in front of reference mirror, ${\lambda}/4$ plate in front of target object, polarizing beam splitter, polarizer in front of image sensor, polarizer in front of the fiber coupled light source, ${\lambda}/2$ plate between PBS and polarizer of the light source. Using the proposed system, we can solve the problem of fringe image with low contrast by using polarization technique. Also, we can control light distribution of object beam and reference beam. 2) the signal processing acceleration method is proposed for PFSI, based on parallel processing architecture, which consists of parallel processing hardware and software such as Graphic Processing Unit(GPU) and Compute Unified Device Architecture(CUDA). As a result, the processing time reaches into tact time level of real-time processing. Finally, the proposed system is evaluated in terms of accuracy and processing speed through a series of experiment and the obtained results show the effectiveness of the proposed system and method.