• 한국공작기계학회논문집
• /
• 제16권5호
• /
• pp.145-150
• /
• 2007

Optical communication according to request of technology of communications and optical fiber to be full filed faster communication and pass over transmission capacity limit per unit area, per unit hour appeared, and this optical fiber acts the biggest role to influence performance of optical communication network. Optical fiber(PMF Polarization Maintaining Fiber) is used, and is used by electric field measurement, self-discipline measurement, sensor(Sensor) Department by high definition measure such as thermometry and storehouse component that use because make broad sense status and polarized light information in passageway and union with storehouse integrated circuit etc. that use broad sense interference developing could transmit in state that keep transmitting broad sense plane of polarization is polarized light existence. Also, research is developed by optical fiber for Coherent communication recently.

• Current Optics and Photonics
• /
• 제5권5호
• /
• pp.576-582
• /
• 2021

Dichroic beam-splitter (DBS) with polarization-maintaining took an important role in the free space quantum telecommunication tests on the Micius satellite of China. In this presentation, we designed and prepared a 50 layer polarization-maintaining DBS coating by a dual ion beam sputtering deposition (Dual-IBS) method. In order to solve a stress problem, an 18 layer special anti-reflection (AR) coating with similar physical thickness ratio was deposited on the backside. By stress compensation, the surface flatness RMS value of the DBS sample decreased from 0.341 λ (@632.8 nm) to 0.103 λ while beam splitting and polarization maintaining properties were almost kept unchanged. Further, we discussed the mechanism of film stress and stress compensation by equation deduction and found that total stress had a strong relationship with the total physical thickness and the ratio of layer materials.

• 조명전기설비학회논문지
• /
• 제27권3호
• /
• pp.1-6
• /
• 2013

In this study, we propose a fiber-optic hydrogen sensor using a polarization-diversity loop configuration composed of a polarization beam splitter, two quarter-wave plates, and a polarization-maintaining fiber coated with palladium whose thickness is ~400nm. One transmission dip of the output interference spectrum of the proposed sensor, chosen as a sensor indicator, was observed to spectrally shift with the increase of the hydrogen concentration, and the sensing indicator showed a wavelength shift of ~2.48nm at a hydrogen concentration of 4%. Except for a hydrogen concentration of 4%, the response time of the proposed sensor was measured as less than 12.5s and did not show significant dependence on the hydrogen concentration. In particular, the proposed fiber hydrogen sensor is more durable and highly resistant to external stress applied on a transverse axis of an optical fiber, compared with other hydrogen sensors based on side-polished fibers or fiber gratings.

• 조명전기설비학회논문지
• /
• 제24권12호
• /
• pp.33-37
• /
• 2010

In this paper, we have demonstrated absolute wavelength tuning in an optical fiber comb filter based on a polarization-diversity loop configuration by controlling the current injected into enameled wires wound on polarization-maintaining fibers (PMF's), that is, adjusting Joule heat generated from enameled wires. The proposed fiber comb filter consists of a polarization beam splitter, a half-wave plate, a quarter-wave plate, and PMF's. And we observed wavelength change of spectral dips in transmission spectra of the fabricated filter by varying an input current applied to enameled wires. The absolute wavelength of the filter could be controlled in proportional to the square of the input current with good linearity, and the rate of the wavelength shift with respect to the input current was measured as 36.79[nm/$A^2$].

• 센서학회지
• /
• 제13권3호
• /
• pp.207-212
• /
• 2004

We have investigated the optical characteristics of a directional coupler made of a side-polished polarization maintaining fiber in contact with a multimode planar waveguide and its applications as sensors. A device structural condition to achieve the polarization insensitive wavelength response has been presented. The fabricated devices revealed a superior immunity to the bending and the deformation of PM fibers in the input section. It is experimentally shown that the proposed device is suitable for a remote fiber sensor.

• 한국전자통신학회논문지
• /
• 제10권1호
• /
• pp.133-138
• /
• 2015

편광유지 광결정 광섬유를 이용하여 무게센서를 제작하여 실험을 하였다. 본 논문의 센서시스템은 3 dB 커플러, 반파장판, 광원으로 구성되어진다. 무게가 편광유지 광결정 광섬유에 가해지면 파장이동을 측정한다. 센서감지부로 원형형태와 직선형태의 2 종류로 제작하여 특성을 조사하였다. 직선형태로 이루어진 센서의 감도는 680 pm/kg 였으며, 원형형태로 구성된 센서의 감도는 270 pm/kg 이었다. 두 가지 형태로 제작된 센서는 선형성이 좋았으며, 감도는 직선형태로 이루어진 센서가 좋음을 알 수 있었다.

• 조명전기설비학회논문지
• /
• 제29권7호
• /
• pp.1-7
• /
• 2015

In this paper, we demonstrated a polarimetric fiber pressure sensor using a polarization-diversity-loop-based Sagnac interferometer(PDLSI) composed of polarization-maintaining fiber(PMF) and a fiber Bragg grating(FBG). In order to compare the pressure sensitivity for various kinds of PMF, three kinds of bow-tie PMF were employed as sensor heads. The maximum pressure sensitivity was measured as approximately -15.07nm/MPa, and an R2 value to represent sensor linearity was measured as ~0.992 at the sensor system using corresponding PMF over a pressure range of 0-0.3MPa. An FBG was utilized and located adjacent to the PMF segment for compensating temperature-induced errors in the measurement of pressure. The pressure sensitivity of the proposed sensor was improved by approximately four times compared with the previously reported pressure sensor based on polarization-maintaining photonic crystal fiber.

• 대한전자공학회논문지SD
• /
• 제41권2호
• /
• pp.33-38
• /
• 2004

측면 연마된 편광 유지 광섬유와 폴리머 평면도파로가 결합된 비대칭 방향성 결합기를 이용하여 가변 광필터를 구현하였다. 소자의 최상부층 위에 형성된 마이크로 스트립 히터에 의하여 유도된 폴리머 평면도파로의 열광학 효과는 결합기의 공진파장을 이동시킨다. 제작된 소자는 720 ㎽의 인가 전력으로 230 ㎚ 이상의 넓은 가변 범위를 보였다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2008년도 하계학술발표회 논문집
• /
• pp.425-426
• /
• 2008

The Panda-type polarization maintaining fibers were fabricated by VAD(vapor-phase axial deposition) method. We fabricate Panda style polarization maintaining fibers that have small form factor($80{\mu}m$), high H-parameter of about $1{\times}10^{-4}/m$ and low optical loss of about 3dB/km.

• 한국광학회지
• /
• 제25권3호
• /
• pp.131-136
• /
• 2014

본 논문에서는 짧은 길이의 편광유지 광자결정 광섬유(polarization-maintaining photonic crystal fiber : 이하 PM-PCF)와 3 dB 광섬유 결합기(fiber coupler), 그리고 편광 조절기(polarization controller)로 구성된 사냑(Sagnac) 복굴절 간섭계(birefringence interferometer)를 이용하여 온도에 둔감한 편광 간섭형 스트레인 센서(polarimetric strain sensor)를 구현하였다. 센서부(sensor head)로 사용된 PM-PCF의 길이는 2 cm이었고, 이는 기존의 PM-PCF 기반 편광 간섭형 스트레인 센서들과 비교할 때 가장 짧은 센서부 길이이다. 제안된 센서는 $0{\sim}8m{\varepsilon}$의 범위에 대해서 스트레인 측정을 수행하였으며, ${\sim}0.87pm/{\mu}{\varepsilon}$에 해당하는 스트레인 민감도를 얻을 수 있었다. 또한, 외부 온도를 $30^{\circ}C$에서 $100^{\circ}C$까지 변화시키며 제안된 센서의 온도 의존성을 조사한 결과, 약 $-12pm/^{\circ}C$의 온도 민감도를 얻을 수 있었으며, 이는 기존의 편광 유지 광섬유의 온도 민감도(약 $-990pm/^{\circ}C$) 에 비해 약 82배정도 작은 값이다. 특히, 실용적인 관점에서 센서 표지자(indicator)로 사용되는 파장이 스트레인 민감도에 큰 영향을 주지 않는다는 것을 실험 및 이론적으로 확인하였다.