• 한국조명전기설비학회지:조명전기설비
• /
• 제6권5호
• /
• pp.27-37
• /
• 1992

We studied the dielectric and dynamic mechanical losses according to the quenching condition in low density polyethylene being used to power cables. According to severe quenching condition, characteristics of the temperature in internal friction los peak have decreased the magnitude of loss peak as amorphous region lengthen. From now on, the frequency dependent characteristics of dielectric loss have investigated at room temperature, and the dielectric loss peak due to interface polarization, between crystal and amorphous region, occurs about 30[Hz], and that, the peak due to orientation polarization in correspondence to the loss peak in internal friction has observed at about 3 [MHz]. As quenching velocity increased, the effect on quenching condition about the dielectric loss has decreased the magnitude of the loss peak. Thus, estimation has been carried out on the activation energies nd the degree of crystallinity by means of X-ray diffraction are obtained as follows: room quenching : 26.4 [kal/mole] and 54.73 [%], ice quenching : 25.6 [kcal/mole] and 48.47 [%], liquid nitrogen quenching specimens : 22.56 [kcal/mole] and 40.95 [%].

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 영호남 합동 학술대회 및 춘계학술대회 논문집 센서 박막 기술교육
• /
• pp.77-81
• /
• 2006

We report the performance of a four-element, 11.67 GHz, high-Tc superconducting (HTS) microstrip antenna array with corporate feed network and circular polarization for direct broadcasting satellite (DBS) system. Our array antennas were designed and built on a 0.5 mm thick MgO substrate. To compare the superconducting antennas with normal conducting counterpart, One antenna pattern was fabricated from gold thin film, and a second pattern was fabricated from $YBa_2Cu_3O_{7-x}$ (YBCO) superconducting thin film. To improve the axial ratio of circularly polarized arrays, sequential rotation technique were used. Efficiency, radiation pattern, return loss and bandwidth were measured for both antennas at room temperature and at cryogenic temperature. The array produced good circular polarization, and the gain of the array at 77 K, relative to a copper array at room temperature was approximately 1.54 dB. The measured return loss of our HTS antenna array was 35.79 dB at the resonant frequency of 11.67 GHz and The total effective bandwidth was about 3.4 %. The results showed that high-temperature superconductors, when used in microstrip arrays, improved the efficiency of the HTS antenna array for circularly polarization.

• Journal of the Optical Society of Korea
• /
• 제20권6호
• /
• pp.799-806
• /
• 2016

We present a polarization-dependent prism array film for controlling the viewing angle distribution of liquid crystal (LC) display panels without loss of light efficiency. On a directional backlight unit, our polarization-dependent prism array film, made into a stacked bilayer with a well-aligned liquid crystalline reactive mesogen (RM) layer on the UV-imprinted prism structure, can continuously control the light refraction function of the prism array by electrically switching incident polarization states of a polarization-controlling layer prepared by a twisted nematic LC mode. The viewing angle control properties of the polarization-dependent prism array film are analyzed under different prism angle and refractive index conditions of the RM layer. A simple analytic model is also presented to describe the intermediate viewing angle distributions with continuously varying applied voltages and incident polarization states.

• ETRI Journal
• /
• 제33권5호
• /
• pp.802-805
• /
• 2011

This letter presents a K-band polarization reconfigurable antenna integrated with a silicon radio frequency MEMS switch into the form of a compact package. The proposed antenna can change its state from linear polarization (LP) to circular polarization (CP) by actuating the MEMS switch, which controls the configuration of the coupling ring slot. Low-loss quartz is used for a radiating patch substrate and at the same time for a packaging lid by stacking it onto the MEMS substrate, which can increase the system integrity. The fabricated antenna shows broadband impedance matching and exhibits high axial ratios better than 15 dB in the LP and small axial ratios in the CP, with a minimum value of 0.002 dB at 20.8 GHz in the K-band.

• 한국전자통신학회논문지
• /
• 제7권6호
• /
• pp.1287-1292
• /
• 2012

본 논문에서는 주파수 1.525GHz~1.665GHz 넓은 대역에서 동작하는 이중편파 패치안테나를 설계 및 제작하였다. 넓은 대역폭 및 고 이득을 갖기 위해 GND기판으로 부터 Air층을 높게 적용하였으며, 광대역 축비 및 고 이득을 갖기 위해 기생패치를 적용하여 원하는 데이터를 얻을 수 있도록 하였다. 그 결과 안테나의 정재파비(VSWR)는 전 대역에서 1.9 이하를 나타내며, 반사손실 S11과 S22는 전 대역에서 -10dB이하로 시뮬레이션과 유사한 특성 결과를 얻었다. LHCP(Left Hand Circular Polarization) 및 RHCP(Right Hand Circular Polarization)의 격리 특성은 시뮬레이션 특성보다 더 개선되어 전 대역에서 -13dB이하로 만족한 결과를 얻었다.

• 마이크로전자및패키징학회지
• /
• 제30권3호
• /
• pp.51-55
• /
• 2023

강유전체 분극 이력곡선의 측정은 강유전체의 구조와 유전특성을 전반적으로 평가하고 해석하는 중요한 수단이다. 강유전체 시편에 저항성분이 포함될 경우 자발분극의 측정 값에 오차가 포함된다. 분극을 측정하는 전기적 회로를 구성할 때, 시편에 포함된 저항성분에 대응하는 외부 저항을 적절히 활용함으로서 시편의 저항성 손실에 의한 오차를 배제하고 내부에 유도된 강유전체 분극의 크기를 정확하게 측정할 수 있었다. 이와 같은 정확한 분극 이력곡선의 평가를 통하여 강유전체 내부의 이온의 변위 및 유전특성을 보다 정확하게 평가할 수 있을 것으로 기대된다.

• 한국광학회지
• /
• 제13권3호
• /
• pp.228-234
• /
• 2002

금속박막이 포함된 측면 연마 광섬유 결합기의 편광 선택적 결합 특성에 관한 이론적 연구 결과를 보고한다. 직교 모드이론을 이용하여 다양한 구조 조건에서 소자의 결합 특성을 분석하였다. 금속 박막의 두께가 증가함에 따라 TE 모드사이의 결합의 세기는 급격히 약해지는 반면에 TM 모드의 결합의 세기는 커짐을 보였다. 높은 편광 소멸비와 낮은 삽입 손실을 가지는 편광 분리기의 설계 조건을 제시하였다.

• Journal of Communications and Networks
• /
• 제8권3호
• /
• pp.286-289
• /
• 2006

Measurement results are presented for the effects of people moving near and across short-range indoor propagation links at 2.45 GHz (ISM band). Excess loss due to scattering and blockage by human bodies in the vicinity of one terminal were measured for different radio links in an office environment. Statistics on fades due to human body motion are given. Polarization coupling (depolarization) for various radio links was measured, and correlation of polarization components is discussed as a basis for using polarization diversity reception in short-range indoor systems.

• 한국광학회지
• /
• 제20권1호
• /
• pp.48-52
• /
• 2009

파장 514.5 nm에서 8.4 um 두께의 ECB(Electically Controlled Birefringenence) 액정 셀과 1/4 파장판을 이용하여 간단하게 360도 이상으로 선형편광의 방향을 광손실없이 자유롭게 바꿀 수 있는 선형편광 회전기를 제안하고 이를 구현하였다. 이 선형편광 회전기의 편광도는 0.964이며, 1주일간의 시간적 변화도 ${\pm}1$도 정도로 시간적 안정성이 매우 뛰어남을 확인하였다. 이 선형편광기의 전압 대회전각의 비선형성 문제는 사용할 전압범위를 바꾸거나 이 선형편광 회전기의 회전각에 대한 피팅곡선을 사용하면 쉽게 해결할 수 있다.

• 조명전기설비학회논문지
• /
• 제27권12호
• /
• pp.10-15
• /
• 2013

In this paper, we propose a Lyot-type optical fiber comb filter based on a polarization-diversity loop structure (PDLS), which has flat-top pass bands and multiwavelength switching capability. Generally, the PDLS can remove the dependency of the filter on input polarization. The proposed filter is composed of a polarization beam splitter, two half-wave plates (HWPs), and two polarization-maintaining fiber loops concatenated with a $60^{\circ}$ offset between their principal axes. By controlling two HWPs, it can operate in a flat-top band mode or a lossy flat-top band mode with an inherent insertion loss of ~3.49dB. In particular, flat-top bands can be interleaved in both modes, which cannot be realized in a Lyot-Sagnac comb filter based on a fiber coupler. Compared with Solc-type high-order comb filters with the same order, the proposed filter shows sharper transition between pass and stop bands.