• 한국광학회지
• /
• 제13권3호
• /
• pp.228-234
• /
• 2002

금속박막이 포함된 측면 연마 광섬유 결합기의 편광 선택적 결합 특성에 관한 이론적 연구 결과를 보고한다. 직교 모드이론을 이용하여 다양한 구조 조건에서 소자의 결합 특성을 분석하였다. 금속 박막의 두께가 증가함에 따라 TE 모드사이의 결합의 세기는 급격히 약해지는 반면에 TM 모드의 결합의 세기는 커짐을 보였다. 높은 편광 소멸비와 낮은 삽입 손실을 가지는 편광 분리기의 설계 조건을 제시하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2000년도 춘계종합학술대회
• /
• pp.119-123
• /
• 2000

본 논문에서는 광대역특성과 원편파특성을 얻기 위해 급전용 마이크로스트립 라인과 전자기적으로 결합하는 Cross 다이폴로 구상된 안테나를 설계하였다. 다이폴의 길이, 각도, 비유전율, 다이폴과 급전 마이크로스트립 라인과의 간격 둥의 파라미터 스터디를 통해 광대역과 원편파특성을 만족시켰다. 계산을 통해 주빔의 축비가 0.1 dB이하로 좋은 원편파특성을 나타내고 있으며, 정면방향으로의 Cross polarization의 레벨도 약 -58 dB를 보여준다.

• ETRI Journal
• /
• 제31권1호
• /
• pp.74-76
• /
• 2009

A new feeding method for the circular polarization (CP) dielectric resonator antenna (DRA) is proposed in this letter. Two orthogonal modes (${TE^x}_{{\delta}11}$, ${TE^y}_{1{\delta}1$) of the rectangular DRA are excited by a $90^{\circ}$ phase difference of the differential and common modes currents of the proposed feeding structure. To demonstrate the good CP performance of the proposed method, a right-hand CP DRA for a global positioning system was designed. The impedance bandwidth of the proposed antenna for $S_{11}$ < -10 dB and 3 dB axial ratio bandwidth are about 5.4% and 1.95% at 1.57 GHz, respectively.

• 한국레이저가공학회지
• /
• 제12권1호
• /
• pp.14-18
• /
• 2009

Ripple formation of femtosecond laser in stainless steel is investigated using 184 fs pulses with a center wavelength of 785 nm. The effect of the laser polarization relative to the translation direction is observed. For drilling with a certain aspect ratio, reflections at the hole walls take place, leading to a non-uniform intensity distribution deep inside the formed hole. Finally, it is shown that a circular polarization during the drilling process significantly improves the quality of the produced holes.

• 대한기계학회논문집A
• /
• 제30권9호
• /
• pp.1102-1109
• /
• 2006

In this paper, the polarization of piezoelectric materials is considered to improve actuation since the piezoelectric polarization has influences on the performance of the actuator. The topology design of compliant mechanism can be formulated as an optimization problem of material distribution in a fixed design domain and continuous approximation of material distribution (CAMD) method has demonstrated its effectiveness to prevent the numerical instabilities in topology optimization. The optimization problem is formulated to maximize the mean transduction ratio subject to the total volume constraints and solved using a sequential linear programming algorithm. The effect of CAMD and the performance improvement of actuator are confirmed through Moonie actuator and PZT suspension design.

• Bulletin of the Korean Chemical Society
• /
• 제8권2호
• /
• pp.115-118
• /
• 1987

The angular dependence of polarization of the A-band emission from RbCl:$Pb^{2+}$ is measured at 13.4 K to determine the symmetry axes of the $Pb^{2+}-v^-_c$ dipoles. The results indicate that these centers posess tetragonal symmetry. This implies that $v^-_c$ is situated in the next-nearest-neighbor (nnn) position to the $Pb^{2+}$ ion. The polarization ratio of the A-band emission measured at various temperatures is found to be independent of the temperature. The temperature independence of polarization confirms that, for the ion, the Jahn-Teller effect reduced by strong spin-orbit interaction does not give rise to thermal depolarization.

• ETRI Journal
• /
• 제43권6호
• /
• pp.978-990
• /
• 2021

This article presents techniques for improved estimation of symbol timing offset (STO) and carrier frequency offset (CFO) for dual-polarization (DP) orthogonal frequency division multiplex (DP-OFDM) systems. Recently, quaternion multiple-input multiple-output OFDM has been proposed for high spectral efficiency communication systems, which can flexibly explore different types of diversities such as space, time, frequency, and polarization. This article focuses on synchronization techniques for DP-OFDM systems using a cyclic prefix, where the application of quaternion algebra leads to new improved estimators. Simulations performed for DP system methods show faster reduction of STO estimator variance with a double-slope line in the logvariance line versus signal-to-noise ratio (SNR) plot compared with singlepolarization (SP) counterparts, and simulations for CFO estimates show a 3-dB gain of DP over SP estimates for same SNR values defined, respectively, for quaternion-valued or complex-valued signals. Cramer-Rao bounds for STO and CFO are derived for the synchronization methods, correlating with the observed gains of DP over SP OFDM systems.

• Current Optics and Photonics
• /
• 제3권4호
• /
• pp.304-310
• /
• 2019

In this paper, a microstructured, hexagonal-shaped dual-core photonic crystal fiber (PCF) is proposed. The proposed structure has specific optical properties to obtain high birefringence and short coupling length, for different values of structural parameters varied over a wide range of wavelength. The properties are analyzed using a solid core of silica material. The proposed structure is implemented as a polarization splitter with splitting length of 1.9 mm and a splitting ratio of -34.988 dB, at a wavelength of 1550 nm. The obtained bandwidth in one band gap of about 81 nm. The numerical analysis ensures that the performance of the proposed polarization splitter is better than that of existing ones.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 춘계학술대회 논문집
• /
• pp.263-268
• /
• 1999

With HAZ of A 106 Gr B steel weldment, fatigue test in air, electrochemical polarization test and corrosion fatigue test in 3.5wt.% NaCl solution were performed changing load ratio. Obtained results are as follows. 1) K$\sub$op/ was independent of K$\sub$max/ and load ratio in fatigue crack growth. 2) In variation of load ratio, the scatter band of crack growth curve was reduced by half considering crack closure 3) In the result of electrochemical polarization test, current density was increased abruptly when potential was larger than corrosion potential. 4) Fatigue crack growth rate in corrosive environment was markly higher than the rate in air because of corrosion characteristics of the material and anodization of inner surface crack.

• 한국전자파학회논문지
• /
• 제13권4호
• /
• pp.393-400
• /
• 2002

본 논문에서는 원형편파를 발생시키기 위한 여러 가지 방법 중 단일 급전 십자개구 결합 방식이 가지는 협대역의 축비 대역폭을 개선하기 위해 단일 급전으로 하이브리드 급전의 효과를 가져을 수 있는 직렬 급전 십자개구 결합 마이크로스트립 안테나를 제안하고, 기존에 발표된 단일 급전 십자개구 결합 안테나와의 축비 대역폭, 이득, 방사패턴, 그리고 임피던스 대역폭 등과 비교하여 개선된 축비 대역폭 특성을 제시하여 제안된 안테나의 타당성을 보였다. 또한 제안된 단일 안테나를 이용해 2$\times$2 배열 안테나로 확장하는 과정에서 시퀀셜 로테이션 기법을 적용함으로써 더욱 넓은 축비 대역폭을 화보할 수 있도록 하였다. 직렬급전 단일 안테나와 2$\times$2 배열 안테나의 측정된 축비 대역폭은 110 MHz(4.6 %)와 420 MHz(17.5 %)를 보였고, 측정된 임피던스 대역폭 (VSWR<1.5)은 240 MHz(10%)와 500 MHz(20.8%)출 가졌으며, 이득 측정결과에서는 단일 안테나와 2$\times$2 배열 안테나 모두 3 dB 이득 대역폭에서 400 MHz(16.7%) 이상의 평탄 특성을 가지며 최대이득에서는 8.2 ㏈i와 12.5 ㏈i의 이득특성을 보여주었다.