• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 춘계학술대회 논문집
• /
• pp.15-16
• /
• 2010

We used Brewster's Law to examine the mechanism of liquid crystal (LC) alignment on an organic insulation layer when subjected to ion-beam irradiation. Brewster's Law implies that the maximum rate polarized rayon a slanted insulation layers on the substrate and it illustrates the dependence of polarization and themechanical structure on the ion beam irradiation process. The pretilt angle of nematic LCs on the organic insulation surface was about $1.13^{\circ}$ for an ion beam exposure of $45^{\circ}$ for 1 minute at 1800eV. This shows the dependence of LC alignment on the polarization ratio in a slanted organic insulation layer. We also discussed the electro-optical characteristic of twisted nematic (TN) LCD using ion beam irradiation on organic overcoat layer.

• 한국광학회지
• /
• 제15권6호
• /
• pp.503-510
• /
• 2004

편광에 무관한 결합길이를 가지는 double-sided deep-ridge (DSDR) 도파관 구조의 수직 방향성 결합기를 이용하여 대칭형 구조를 가지는 스위칭 동작 유도 영역과 비대칭형 구조를 가지는 소멸비 향상 영역으로 구성된 수직 방향성 결합기 스위치를 제안하였다. 이러한 구조를 이용하여 짧은 길이를 가지며 편광에 관계없이 크로스 상태와 바 상태에서 모두 30 dB 이상의 소멸비를 가지는 스위치를 설계하는 방법과 설계 예를 제시하였다.

• 한국통신학회논문지
• /
• 제40권7호
• /
• pp.1363-1368
• /
• 2015

본 논문에서는 개구결합 원형편파 마이크로스트립 배열안테나를 제안하였다. 제안한 안테나는 2.4GHz ISM 대역용이고 개구모양은 변형된 H형 슬롯을 사용하였다. 전자파 해석 툴인 HFSS를 반복적으로 사용하여 최적의 안테나 설계 파라미터 값을 찾았다. 배열안테나의 반사손실, 축비, 방사패턴 및 이득을 단일안테나와 비교하였다. 제안한 배열안테나가 2.4GHz ISM 대역 등 여러 분야에서 충분히 사용될 수 있음을 확인하였다.

• ETRI Journal
• /
• 제40권5호
• /
• pp.561-569
• /
• 2018

Modern communication systems employ wideband antennas with circular polarization (CP) radiation. In this work, asymmetric modified bow-tie (ABT) and symmetric modified bow-tie (SBT) slotted circularly polarized single-point probe-fed circular patch antennas with dimensions of $40mm{\times}40mm$ for wideband applications are proposed. A 10 dB RL bandwidth of 350 MHz with CP, 3 dB axial ratio (AR) bandwidth of 100 MHz, peak gain of 4.9 dBic, and 10 dB RL bandwidth of 530 MHz with CP, 3 dB AR bandwidth of 140 MHz, peak gain of 5 dBic are obtained for ABT and SBT slotted circular patch antennas, respectively. The proposed SBT slotted patch is scaled up and down to $50mm{\times}50mm$ and $30mm{\times}30mm$, respectively. The proposed scaled-up version offers 10 dB RL and 3 dB AR bandwidths of 340 MHz and 80 MHz, with a peak gain of 5 dBic. The scaled-down version offers 10 dB RL and 3 dB AR bandwidths of 710 MHz and 180 MHz, with a peak gain of 5.25 dBic. These prototypes are suitable to work in IEEE 802.11a WLAN, ISM, and IEEE 802.11ac applications. The measured and simulated results are then discussed and compared.

• 한국인터넷방송통신학회논문지
• /
• 제13권5호
• /
• pp.143-148
• /
• 2013

2개의 플라즈마 다중모드 간섭 결합기 (P-MMIC)와 DFB 전송구조를 결합하여 하나의 새로운 초소형 광 편향기를 구현하였다. $2{\times}1$과 $1{\times}2$ P-MMIC를 연결하는 내부 DFB 구조로부터 반사되거나 투과되는 TE, TM 모드들의 편향된 전력들을 P-MMIC를 통하여 출력되도록 설계하였다. 수치해석 결과 설계된 DFB 구조형 플라즈마 다중모드 간섭 결합기의 크기는 약 $75{\mu}m$로 매우 작았으며, 낮은 삽입손실과 높은 분리비율을 보였다. 더욱이, DFB 전송구조의 대역폭은 약 20 nm로 광대역 특성을 나타내었다.

• Journal of electromagnetic engineering and science
• /
• 제14권4호
• /
• pp.360-366
• /
• 2014

A single-feed composite cavity-backed four-arm curl antenna is presented for use in global positioning systems (GPS). Its primary radiating element is fed by a vacant-quarter printed ring, which helps the antenna directly match to a $50-{\Omega}$ coaxial line and produce a good circular polarization (CP). The cavity-backed reflector is employed to improve the CP radiation characteristics in terms of 3-dB axial ratio (AR) beamwidth and minimum AR value. The optimized design with an overall size of $90{\times}90{\times}25mm^3$ ($0.4725{\lambda}_o{\times}0.4725{\lambda}_o{\times}0.13{\lambda}_o$ at 1,575 MHz) results in a ${\mid}S_{11}{\mid}<-10dB$ bandwidth of 8.66% (1,514-1,651 MHz) and a 3-dB AR bandwidth of 2.23% (1,555-1,590 MHz). The antenna radiates a widebeam right-hand circular polarization and operates with a measured radiation efficiency greater than 90% within its impedance matching bandwidth.

• 한국물환경학회지
• /
• 제23권2호
• /
• pp.244-250
• /
• 2007

This study was carried out to obtain the optimum design factors for an eletrolytric flotation reactor. When the effluent of the leachate treatment facility was treated under the condition of 10 volts, 30 minutes, at the Al-Al electrode system; COD removal efficiency was 45%, and total phosphorus removal efficiency was 98%. The high removal efficiency was caused by the fact that phosphate was removed by leaching $Al^{3+}$ from two electrodes. The leachate containing high ammonium nitrogen concentration was treated by a batch test under the condition of 60 minutes reaction time and added chloride ion; ammonium nitrogen removal efficiency was 89%. This high efficiency was affected by added chloride ion to wastewater. To find the optimum current density and voltage of the leachate containing chloride ion (ratio of $Cl^-/NH_4-N$ is 11) a electrochemical polarization curve was used. These values were found to be $4.5mA/cm^2$ and about 2.1 V, respectively. When C-Al electrode system was used at a batch test, the total nitrogen removal efficiency was increased by 1.8 to 3.3 times, compared to Al-Al electrode system due to high $Cl_2$ gas production.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권2호
• /
• pp.132-137
• /
• 1996

Pb(Zr$_{x}$Ti$_{1-x}$ )O$_{3}$ solutions prepared by sol-gel processing with different Zr/Ti ratio were coated on Pt/SiO$_{2}$/Si substrates using spin coating method. Coated films were annealed by rapid thermal annealing at 650.deg. C for 20sec to fabricate Pb(Zr, Ti)O$_{3}$ ferroelectric thin films. Electrical properties of the films such as dielectric constant and loss, ferroelectric hysteresis, fatigue, switching time, and leakage current were measured. Hysteresis of the films with different Zr/Ti ratio yield Pr ranging 10-21.mu.C/cm$^{2}$, E$_{c}$ ranging 37.5-137.5kV/cm. Hysteresis curve was changed from square-type to slim type according to increasing Zr contents. Switching time was faster than 180ns, and leakage current was about 20.mu.A/cm$^{2}$. The film underwent above 10$^{8}$ cycles of reversed polarization showed fatigue with increased coercive field and decreased remnant polarization.tion.

• 한국전기전자재료학회논문지
• /
• 제21권12호
• /
• pp.1124-1129
• /
• 2008

The object of this paper is to acquire the data related to insulation evaluation of hybrid vehicle traction motors. We made a comparative analysis on Insulation Resistance (IR), Dielectric Absorption Ratio (DAR), and Polarization Index (PI) of the motor stators. The experiment was carried out according to IEEE Std. 43 and IEC 60085-1 for insulation resistance test standard of rotating machinery. Test voltage of 500 V was applied between a phase and the enclosure. The IR and the DAR of used motors were lower than those of new ones. The DAR and the PI were $0.92{\sim}1.02$ and $0.74{\sim}1.1$, respectively and the result did not meet the recommendation basis 2 for insulation level H. From the experimental results, we could prepare parameters and basis for insulation evaluation of the traction motor stator by the comparative analysis of short-time insulation resistance changes, DAR and PI.

• 조명전기설비학회논문지
• /
• 제21권4호
• /
• pp.80-87
• /
• 2007

This paper will suggest that the 1 cross orthogonal loop type sensor improves on the orthogonal loop form sensor-head, which is available a calibration of the linear birefringence, when a fiber optic current sensor was composed. An output characteristics of the 1 cross orthogonal loop form, a general closed loop form, the orthogonal loop form are compared by the IEC(International Electrotechnical Commission) 60044-8 standard, and the state of polarization is compared with three forms. As a result, when the closed loop form was changed to the orthogonal loop form, retardation decreased 15.3[%]. When the closed loop form was changed to the 1 cross orthogonal loop type, the retardation decreased 33.8[%]. As a result of the Faraday Effect measurement, the 1 cross orthogonal loop form has the highest output characteristic and the lowest error ratio. It met the 0.5 class of the IEC 60044-8 standard. Thus, in application of the 1cross orthogonal loop form, the possibility to develop high reliability fiber optic current sensors that have a high output and stable error ratio rises is increased.