• Journal of Life Science
• /
• v.22 no.3
• /
• pp.332-339
• /
• 2012

Horizontal distributions and their ecotoxicological implications relating to organochlorine compounds (OCs) were determined in surface sediments sampled from the West Nakdong River. The concentrations of polychlorinated biphenyls (PCBs), dichlorodiphenyltrichloroethanes (DDTs), hexachlorocyclohexanes (HCHs), and hexachlorobenzene (HCB) in surface sediments were in the range of 0.57-3.68, 0.41-8.35, 0.63-1.65, and n.d.-0.56 ng/g, respectively. DDTs represent the major OC in the West Nakdong River. Concentrations of PCBs and DDTs correlate with the total organic carbon (PCBs: r=0.874, p<0.001, and DDTs: r=0.762, p<0.05, respectively), indicating that organic content in the sediments is one of the major factors for influencing horizontal distribution of the organochlorine compounds in this river. Examining the potential poisonous character of the surface sediments to benthic organisms according to the sediment quality guideline (SQG), set out by the Canadian Council of Ministers of the Environment (CCME) and the National Oceanic and Atmospheric Administration (NOAA), we found that the concentrations of total PCBs, p,p'-DDD, and ${\gamma}$-HCH were lower than the effects range-low (ER-L) and the probable effects level (PEL). As a result, it is considered that the effect of organochlorines in the region considered on benthic organisms is very low from the perspective of environmental toxicology. However, in terms of the Canadian SQC, p,p'-DDE, p,p'-DDT, and total DDTs, respectively, exceeded the interim sediment quality guidelines (ISQG) and the threshold effect level (TEL) in 30%, 17%, and 19%, respectively, of the sediment samples analyzed.

• Fire Science and Engineering
• /
• v.31 no.4
• /
• pp.103-110
• /
• 2017

With the common tendency in the accordance with the trend, low-stories built edifices that are Pilotis-oriented structured exponentially and constantly increasing its number of buildings. It inevitably contains its risks of facing conflagrations as most of its part is used as parking lots. In the parking lots, the length of the flame has a heavy-weighted possibility that it would get increased because the heat release rate gets relatively high due to the vehicle insulation. Following on top of that, due to the nature of the Pilotisconsisting of pillars, there is a risk of flame spread to the adjacent building if the same Pilotis-structured buildings are adjacent to each other, if the flame spreads to the surroundings due to the influence of the wind. Because the most of the pilotis-structured-buildings have this entrance that makes the residents be able to enter, if the entrance were plugged the resident get a serious risk of a poisonous gas and a flame. Therefore, if the parking-lots of the pilotis-structured-buildings are adjacent to each other it requires a space to prevent the place from the spread of flame. This research studied how far is appropriate to prevent flame spreading with FDS. As a result, the study found that the distance at least 3.0 m is required.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.6
• /
• pp.123-132
• /
• 2012

Gas sensors has been used very differently that depending on following purposes; Automotive (exhaust gas, fuel mixture gas, oxygen, particulates), agriculture / food industry (fresh, stored, CO2, humidity, NH3, nitrogen oxide gas, organic gas, toxic gas emitted from pesticides and insecticides), industrial / medical (chemical gas, hydrogen, oxygen and toxic gases), military (chemical weapon), environmental measurements (CO and other air pollution consisting of sulfur and nitrogen gas), residential (LNG, LPG, butane, indoor air, humidity). The types of industrial toxic substances are known about 700 species and many of these exist in gaseous form under normal conditions. he multi-gas detection sensors will be developed for casualties that detect the most important and find easy three kinds of gases in marine plant; carbon dioxide(CO2), carbon(CO), ammonia(NH3). Package block consists of gas sensing device minor ingredient, rf front end, zigbee chip. Develope interworking technology between the sensor and zigbee chip inside a package. Conduct a performance test through test jig about prototype zigbee sensor module with rf output power and unwanted emission test. This research task available early address when poisonous gas leaked from large industrial site and contribution for workers' safety at the enclosed space.

• Journal of the Korean Society for Computer Game
• /
• v.31 no.4
• /
• pp.101-110
• /
• 2018

This thesis analyzed the correlation between the psychological characteristics of adolescents and the use of games in the first year students of the national high school in 2016. The game is one of the representative entertainment industries in Korea and is an industry that has a great influence on becoming a powerhouse as cultural contents. However, games and immersion are expressed as a negative vocabulary of game addiction and are referred to as social problems and youth problems, and they give negative perception to the content of games. All users have the right to enjoy the content, but only negative words are used in poisonous games and they are packed as if they are social problems. In the present study, many emotional problems that were derived from previous studies were not related to game use in general adolescents. Through the questions related to 'depression', students who are not motivated or energy. The results of this study are as follows. First, the positive effects of game and youth emotional problems were derived through the conclusion that students who are active and emotionally bright are more likely to use game contents. This study was conducted to help change the social perception of the game positively by breaking the social fixed point of view that the emotionally troubled adolescents engage with the game and cause social problems.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.19 no.2
• /
• pp.65-71
• /
• 2021

Purpose: The purpose of this study was to investigate the cause of acute fatal poisoning and the time of death by analyzing the National Emergency Department Information System (NEDIS) of South Korea. Methods: The NEDIS data from 2014 to 2018 excluding non-medical visits were used for this study. The patients with acute poisoning were extracted using diagnostic codes. The toxic substances were classified into pharmaceuticals, pesticides, gases, artificial poisonous substances, and natural toxic substances. Patients were classified according to the time of death, place of death, and region. In each case, the most causative substances of poisoning were identified. Results: There were 380,531 patients including poisoning-related diagnoses, of which 4,148 (1.1%) died, and the WHO age-standardized mortality rate was 4.8 per 100,000. Analysis of 2,702 death patients whose primary diagnosis was acute poisoning, the most common cause of poisoning death was pesticides (62%), followed by therapeutic drugs, gas, and artificial toxic substances. Herbicides were the most common pesticides at 64.5%. The proportion of mortality by time, hyperacute (<6 h) 27.9%, acute (6-24 h) 32.6%, subacute (1-7 d) 29.7%, and delayed period (>7 d) were 9.8%. Conclusion: This study suggests that the most common cause of poisoning death was pesticides, and 60% of deaths occurred within 24 hours. The 71% of mortality from pesticides occurred within 6-24 hours, but mortality from gas was mostly within 6 hours. According to the geographic region, the primary cause of poisoning death was varied to pesticides or pharmaceuticals.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.421-425
• /
• 2018

Methanol is a clear, colorless, volatile, and poisonous liquid that is commonly used as an industrial solvent. Visual impairment is a common symptom of methanol poisoning; however, visual impairment rarely occurs after exposure through inhalation. Therefore, visual loss after methanol intoxication via respiration has rarely been reported. We report a case of visual damage associated with methanol poisoning via respiratory exposure in an industrial setting. In this case in South Korea, a 28-year-old woman who worked at a cell phone factory was admitted to the emergency department with mental changes. She had blurred vision that began two days prior, but she did not come to the hospital until she experienced mental changes. She ranked 9 on the Glasgow Coma Scale and presented with severe metabolic acidosis. So, she was admitted to intensive care, and continuous renal replacement therapy was performed. Finally, she was discharged after recovery of her mental state, but had to undergo rehabilitation for six months. Also, her visual impairment was permanent. Methanol intoxication can occur through inhalation, which is difficult to detect initially. However, treatment of methanol poisoning is time-critical. Therefore, doctors should always keep in mind that methanol intoxication may occur via respiration. If in doubt, treatment should be given as soon as possible.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.9
• /
• pp.649-657
• /
• 2019

Hydrazine, which is used as a representative monopropellant, is an extremely poisonous substance and has a disadvantage that it is harmful to the human body and is very difficult to handle. In recent years, research on the development of non-toxic and environmentally friendly propellants has attracted much attention. Ammonium dinitramide(ADN) based propellant developed by Swedish Space Corporation has superior performance to hydrazine and has been commercialized through performance verification in space environment. On the other hand, the exhaust gas from a thruster nozzle collides with a satellite while it is spreading in the vacuum space, thermal load and surface contamination may occur and may reduce the performance and lifetime of the satellite. However, a study on the effect of the exhaust gas of the green propellant thruster on the satellite has not been conducted in earnest yet. Therefore, the exhaust gas behavior in space was analyzed in this study for the ADN based green monopropellant using Navier-Stokes equations and the DSMC method. As a result, it can be expected to be used as design validation data in the development of satellite when using the ADN based green monopropellant.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.869-875
• /
• 2009

Safety is a big issue in the construction sites. For safe and secure management, tracking locations of construction resources such as labors, materials, machineries, vehicles and so on is important. The materials, machineries and vehicles could be controlled by computer, whereas the movement of labors does not have fixed pattern. So, the location and movement of labors need to be monitored continuously for safety. In general, Global Positioning System(GPS) is an opt solution to obtain the location information in outside environments. But it cannot be used for indoor locations as it requires a clear Line-Of-Sight(LOS) to satellites Therefore, indoor location monitoring system could be a convenient alternative for environments such as tunnel and indoor building construction sites. This paper presents a case study to investigate feasibility of Wi-Fi based indoor location monitoring system in construction site. The system is developed by using fingerprint map of gathering Received Signal Strength Indication(RSSI) from each Access Point(AP). The signal information is gathered by Radio Frequency Identification (RFID) tags, which are attached on a helmet of labors to track their locations, and is sent to server computer. Experiments were conducted in a shield tunnel construction site at Guangzhou, China. This study consists of three phases as follows: First, we have a tracking test in entrance area of tunnel construction site. This experiment was performed to find the effective geometry of APs installation. The geometry of APs installation was changed for finding effective locations, and the experiment was performed using one and more tags. Second, APs were separated into two groups, and they were connected with LAN cable in tunnel construction site. The purpose of this experiment was to check the validity of group separating strategy. One group was installed around the entrance and the other one was installed inside the tunnel. Finally, we installed the system inner area of tunnel, boring machine area, and checked the performance with varying conditions (the presence of obstacles such as train, worker, and so on). Accuracy of this study was calculated from the data, which was collected at some known points. Experimental results showed that WiFi-based indoor location system has a level of accuracy of a few meters in tunnel construction site. From the results, it is inferred that the location tracking system can track the approximate location of labors in the construction site. It is able to alert the labors when they are closer to dangerous zones like poisonous region or cave-in..

• Journal of Life Science
• /
• v.33 no.8
• /
• pp.651-662
• /
• 2023

Peroxisomes, known as microbodies, are a class of morphologically similar subcellular organelles commonly found in most eukaryotic cells. They are 0.2~1.8 ㎛ in diameter and are bound by a single membrane. The matrix is usually finely granular, but occasionally crystalline or fibrillary inclusions are observed. They characteristically contain hydrogen peroxide (H₂O₂) generating oxidases and contain the enzyme catalase, thus confining the metabolism of the poisonous H₂O₂ within these organelles. Therefore, the eukaryotic organelles are greatly dynamic both in morphology and metabolism. Plant peroxisomes, in particular, are associated with numerous metabolic processes, including β-oxidation, the glyoxylate cycle and photorespiration. Furthermore, plant peroxisomes are involved in development, along with responses to stresses such as the synthesis of important phytohormones of auxins, salicylic acid and jasmonic acids. In the past few decades substantial progress has been made in the study of peroxisome biogenesis in eukaryotic organisms, mainly in animals and yeasts. Advancement of sophisticated techniques in molecular biology and widening of the range of genomic applications have led to the identification of most peroxisomal genes and proteins (peroxins, PEXs). Furthermore, recent applications of proteome study have produced fundamental information on biogenesis in plant peroxisomes, together with improving our understanding of peroxisomal protein targeting, regulation, and degradation. Nonetheless, despite this progress in peroxisome development, much remains to be explained about how peroxisomes originate from the endoplasmic reticulum (ER), then assemble and divide. Peroxisomes perform dynamic roles in many phases of plant development, and in this review, we focus on the latest progress in furthering our understanding of plant peroxisome functions, biogenesis, and dynamics.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.4D
• /
• pp.459-467
• /
• 2008

Because of the insufficiency of ground space, the utilization of underground is getting more and more in these days. Moreover, underground space is being used not only buildings but multipurpose space for movement, storage and shopping. However, ground space has vital weakness for fire compared to ground space. Especially in case of underground shopping center, there are various stuffs to burn and poisonous gas can be exposed on this count when the space is burned. A large number of casualties can be also occurred from conflagration as underground space has closed structures that prevent rapid evacuation and access. Therefore, this research proposes the guidance methodology for evacuation from conflagration in large-sized underground facilities. In addition, suggested methodology uses high technology wireless sensor information from up-to-date ubiquitous sensor networks. Fire information collected by sensors is integrated with existing underground facilities information and this is sent to guidance systems by inducing process. In the end, this information is used for minimum time paths finding algorithm considering the passageway capacity and distance. Also, usefulness and inadequacies of proposed methodology is verified by a case study.