• Journal of the Korean Society of Visualization
• /
• v.14 no.2
• /
• pp.40-45
• /
• 2016

Magnetic resonance velocimeter (MRV) is a powerful tool to non-invasively measure the velocity of a fluid flow in various fields ranging from medicine to engineering. However, since the demands for accurate measurement in the solid/liquid interface for cardiovascular diseases and porous media increase, the improvement of spatial resolution is required. In this study, a solenoid RF coil is developed for high spatial resolution measurement. The signal-to-noise ratio in solenoid RF coil is increased seventeen times better than that in commercial coil. Moreover, the velocity distribution of Hagen-Poiseuille flow is measured with in-plane resolution of $36{\mu}m$ by $36{\mu}m$ and the accuracy of the measured velocity is compared with theoretical distribution of the laminar flow. Flow rate calculated by MRV is estimated with the flow rate injected by syringe pump.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.4 no.4
• /
• pp.15-20
• /
• 2007

All of the hydraulic spool valves adopt radially grooved spools to avoid hydraulic locking. In this paper, a commercial computational fluid dynamics (CFD) code, FLUENT is used to investigate the accurate Poiseuille flow characteristics inside single groove. The stream lines, velocity and pressure distributions are obtained for various groove widths, depths and shapes. The stream lines are highly affected by groove shape and there occurred large vortexes inside groove beyond a certain ratio of groove width to depth. Especially the U shaped groove restrains the occurrence of vortex. Therefore the numerical method adopted in this paper can be use in optimum designing of multi-grooved hydraulic spool valves.

• Journal of the Korean Society of Visualization
• /
• v.8 no.4
• /
• pp.31-37
• /
• 2010

In this study, a novel hybrid micro/nano PIV system combining defocusing and TIRFM technique has been developed for the multiscale flow measurement. With the developed system, both far and near field velocity fields have been measured simultaneously in a 2D straight microchannel and the particle trajectories were extracted by the nearest tracking algorithm. The shear rate values taken from experimental results have been estimated by comparing with the analytical solution of 2D Poiseuille flow and it is confirmed that the result shows good agreement with the theoretical value.

• Agricultural and Biosystems Engineering
• /
• v.2 no.1
• /
• pp.31-36
• /
• 2001

Based on the viscous flow characteristics of gas through capillary tube, a simple and cheap gas mixing system was developed for controlling gas compositions in CA chambers. The gas flow rate through capillary tube had a linear relationship with pressure, (length)$^{-1}$ and (radius)$^4$ of capillary tube, which agreed well with Hagen-Poiseuille’s law. The relationship between flow rate and combined parameters was described as Q=0.000209724($\pi$ r$^4$P/$\mu$L) and the coefficient of determination was 0.9984. The developed system could control gas concentrations in CA chambers within $\pm$0.3% deviation compared to the preset concentrations. It was possible to predict the required time and required gas flow rate for exchanging the gs in CA chamber to a certain concentration of gas by using the mathematical model developed in this study.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.1
• /
• pp.160-169
• /
• 1987

Numerical simulation of the flow of upper convected Maxwell fluid through planar 4:1 contraction has been performed using type dependent difference apprximation of vorticity equation. For creeping flow assumption, the numerical convergence has been achieved up to much higher values of elasticity parameter than those obtained by conventional finite difference method. For non-vanishing Reynolds number flow, it is shown that the corner vortices disappear, which is in good qualitative agreement with extant experimental results. In doing so, spatial distributions of stream function, vorticity and stresses are considered in relation to change of type of vorticity.

• Journal of the Korean Society of Visualization
• /
• v.18 no.1
• /
• pp.67-73
• /
• 2020

Flexible structures have been adopted in heat transfer systems as vortex generators. The flexible vortex generators immersed in a flow show a self-sustained oscillatory motion, which enhances fluid mixing and heat transfer. In the present study, the vortex generators in a two-dimensional channel flow are numerically investigated, and they are symmetrically mounted on the upper and lower walls with an inclination angle. The momentum interaction and heat transfer between the flexible vortex generators and the surrounding fluid are considered by using an immersed boundary method. The inclination angle is one of the important factors in determining the flapping kinematics of the flexible vortex generators. The flapping amplitude increases as the inclination angle increases, thereby enhancing fluid mixing. The heat transfer is enhanced up to 80% comparing to the baseline channel flow.

• Membrane Journal
• /
• v.7 no.3
• /
• pp.142-149
• /
• 1997

The extended analysis on the diverging flow through asymmetric membrane pores has been performed in this study. Afore rigorous equations of velocity profile relevant to the divergent slit and cone shaped channels, which are widely used as a general pore model, have been obtained by employing a creeping flow approach of Newtonian fluids. As a degree of asymmetry (i.e., diverging angle) is increased, the predicted flow function shifts Toward the center region due to the incorporated wall effect, so that the overall velocity profile becomes decreased. It is true, as expected, that when the divergent channel is in the low diverging angle limit, the channel flow results in the Poiseuillean fashion by utilizing a lubrication approximation. The flow rate equation of each type of channel has been developed from the combined solution of velocity profile and pressure fields. The effect of diverging flow on the flow rate enhancement has been remarkably predicted, in which the flow rate increases with the increase of pore asymmetry. The advantage of our theoretical results lies in the analytical expression for the diverging flow behavior through pore channels as well as its ability to play a fundamental role on the related membrane filtrations such as microfiltration and ultrafiltration.

• Journal of the Korean Society of Visualization
• /
• v.15 no.3
• /
• pp.27-33
• /
• 2017

Direct numerical simulations of turbulent channel flows with moving wall conditions on the top wall are performed to examine the effects of the moving wall on the turbulent characteristics. The moving wall velocity only applied to the top wall with the opposite direction to the main flow is systematically varied to reveal the sustained-mechanism for turbulence. The turbulence statistics for the Couette-Poiseuille flow, such as mean velocity, root mean square of the velocity fluctuations, Reynolds shear stress and pre-multiplied energy spectra of the velocity fluctuations, are compared with those of canonical turbulent channel flows. The comparison suggests that although the turbulent activity on the top wall increases with increasing the Reynolds number, that on the bottom wall decreases, contrary to the previous finding for the canonical turbulent channel flows. The increase of the turbulent energy on the top wall is attributed to not only the increase of the Reynolds number but also elongation of the logarithmic layer due to increase of the wall layer on the top wall. However, because the logarithmic layer is shortened on the bottom wall due to the decrease of the wall layer, the turbulence energy on the bottom wall decreases despite of the increase of the Reynolds number.

• Membrane Journal
• /
• v.26 no.4
• /
• pp.291-300
• /
• 2016

Techniques for selectively separating molecules of gas and liquid states using various separation membranes have been widely used in variety of applications such as chemical, biological, pharmaceutical, and petrochemical industries. As the nanochannel diameter, inter-channel distance and length of the nanochannel of the anodic aluminum oxide (AAO) membranes can be precisely controlled, various studies to effectively separate mixture of various molecules using AAO membrane have been widely carried out. In this study, we fabricated AAO membranes of cylindrical nanochannels of various diameter sizes and of through-hole structure, that is, nanochannels of which both ends of each nanochannel are open. Using those AAO membranes of through-hole nanochannel structure, we studied the selective permeation polymer chains dissolved in a solvent based on hydraulic volume of the polymer chains. We found a precise, quantitative relationship between the radius of gyration of polymer chains that permeated through nanochannels inside AAO membrane and the diameter of nanochannels. In addition, we demonstrate that the behavior of the polymer solution flowing through nanochannel of the AAO membrane can be successfully described with the Hagen-Poiseuille relationship. It is, therefore, possible to theoretically interpret the nanoflow of the solution flowing inside the cylindrical nanochannel.

• The Journal of the Acoustical Society of Korea
• /
• v.6 no.2
• /
• pp.19-29
• /
• 1987

The absorption coefficients of various length bundles of straws simulating perforated material were studied both theoretically and experimentally. For the theoretical predictions Zwikker and Kosten's theory was modified by adapting Biot's theory based on Poiseuille flow. The experimental data were collected using an impedance tube where the attenuation along the length of the tube was considered. The theoretically predicted values agreed very well with the experimentally measured ones for frequencies lower than 700Hz with bundles shorter than 120mm in length placed against the rigid end of the impedance tube. Configurations with an air gap between the end of a bundle and the rigid end were also investigated. Absorption coefficients were higher for 150mm bundles than for those of combined/air gap configurations with a total length of 150mm. Also for the fixed bundle lengths, absorption was found to increase with increasing air gap.