• Journal of the Korean Magnetic Resonance Society
• /
• v.10 no.2
• /
• pp.175-187
• /
• 2006

Binding interactions between a positively charged porphyrin derivative TMAP(meso-tetra(p-trimethylanilinium-4-yl)porphyrin) and triple helical $(dT)_{12}{\cdot}(dA)_{12}{\cdot}(dT)_{12}$, as well as double helical $(dA)_{12}{\cdot}(dT)_{12}$ have been studied with NMR, UV and CD spectroscopy to obtain the detailed information about the binding mode and binding site. UV melting studies showed both DNA duplex and triple helix represented very similar UV absorption patterns upon binding TMAP, but the presence of third strand of triple helical $(dT)_{12}{\cdot}(dA)_{12}{\cdot}(dT)_{12}$, inhibited improvement in thermal stability in terms of melting temperature, $T_m$. In addition, the TMAP molecule is thought to bind to the major groove, according to CD and NMR data. But absence of the clear isosbestic point in UV absorption spectra represented that binding of TMAP to DNA duplex as well as DNA triplex did not show a single binding mode, rather complex binding modes.

• Wind and Structures
• /
• v.32 no.4
• /
• pp.309-319
• /
• 2021

The vortex-drift pattern over a girder surface, actually demonstrating the complex fluid-structure interactions between the structure and surrounding flow, is strongly correlated with the VIVs but has still not been elucidated and may be useful for modeling VIVs. The complex fluid-structure interactions between the structure and surrounding flow are considerably simplified in constructing a vortex model to describe the vortex-drift pattern characterized by the ratio of the vortex-drift velocity to the oncoming flow velocity, considering the aerodynamic work. A spring-suspended sectional model (SSSM) is used to measure the pressure in wind tunnel tests, and the aerodynamic parameters for a typical streamlined closed-box girder are obtained from the spatial distribution of the phase lags between the distributed aerodynamic forces at each pressure point and the vortex-excited forces (VEFs). The results show that the ratio of the vortex-drift velocity to the oncoming flow velocity is inversely proportional to the vibration amplitude in the lock-in region and therefore attributed to the "lock-in" phenomena of the VIVs. Installing spoilers on handrails can destroy the regular vortex-drift pattern along the girder surface and thus suppress vertical VIVs.

• Journal of Power Electronics
• /
• v.19 no.2
• /
• pp.519-528
• /
• 2019

The unified power quality conditioner (UPQC) is an effective custom power device that is used at the point of common coupling to protect loads from voltage and current-related PQ issues. Currently, most researchers have studied series unit and parallel unit models and an idealized transformer model. However, the interactions of the series and parallel converters in AC-link are difficult to analyze. This study utilizes an equivalent transformer model to accomplish an electric connection of series and parallel converters in the AC-link and to establishes a precise unified mathematical model of the UPQC. The strong coupling interactions of series and parallel units are analyzed, and they show a remarkable dependence on the excitation impedance of transformers. Afterward, a feed-forward decoupling method based on a unified model that contains the uncertainty components of the load impedance is applied. Thus, this study presents an adaptive method to estimate load impedance. Furthermore, simulation and experimental results verify the accuracy of the proposed modeling and decoupling algorithm.

• Fourth Industrial Review
• /
• v.4 no.1
• /
• pp.1-9
• /
• 2024

Purpose: Education is the part of a fundamental human right across the world. In recent years, the trend of virtual education has increased tremendously. The paper aims to find the impact of adoption, accessibility, interactions, knowledge, and satisfaction on the success of transformation towards virtual education. Research design, data and methodology: Primary data has been gathered through the use of responses from students taking admission in virtual higher education to standardized questionnaires. Of the 250, only 122 were considered complete and have been used in further studies. Convinced random sampling method has been used. The results were evaluated using the Likert Five-Point Scale. For applying these statistical tools software SmartPLS and SPSS 19 have been used. The fitness of the model has been re-checked through an Artificial Neural Network (ANN). Result: Results derived that adoption, accessibility, and interactions have a significant impact on knowledge, knowledge influences satisfaction level and satisfaction have a meaningful impact on the success of transformation towards virtual education. Conclusion: It can be concluded that virtual education has the potential to change the future of the education system and its potential in India. The highest importance is due to satisfaction (100%), adoption (98.7%), knowledge (91.4%), accessibility (62%), and interaction (29.2%).

• Journal of environmental and Sanitary engineering
• /
• v.23 no.4
• /
• pp.1-11
• /
• 2008

The goal of today's environmental education is to enhance the understanding of the serious of environmental problems and the interactions among environment. With this perspectives people need to be aware that environmental education is no longer a liberal arts in university education, but play a vital role within the socio-cultural context. This study was performed to assess the changes in the university student's attitudes and consciousness in real life after the education of a point at issues of environmental problems. For this study 11 questionnaires which were composed of large scale environmental problems(water and air pollution), and small scale environmental problems(food additives, GMO, endocrine disrupter) were performed with self-administered by university students(n=781) who made a application for liberal arts related to environmental subjects. According to the analysis the most student's consciousness of a point at issue of environmental problems(water pollution, air pollution, additives, GMO, endocrine disrupter), and practical attitudes(i.e., practical attendant at congregation and internet voting) were change statistically significant(p<0.01) after the education of a point at issue of environmental problems rather than before. Specially, the score for the item of the large scale problem of environmental issues(water pollution, air pollution) were decreased significantly(p<0.01), but the score for the small scale problems, such as food additives, GMO, endocrine disrupter were increased significantly(p<0.01) after the education of a point at issue of environmental problems(p<0.01). And among the students that participated, 97.7% responded that such a point at issues of environmental problem is needed at the university. With this educational improvements supports the states that the education of a point at issue of environmental problems were more essential, practical and needed to students at university rather than that of an existing instruction. Thus, further studies are required to develop the education of environmental issues at universities like STSE programme.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.114.1-114.1
• /
• 2014

Copper is considered to be the most promising substrate for the growth of high-quality and large area graphene by chemical vapor deposition (CVD), in particular, on the (111) facet. Because the interactions between graphene and Cu substrates influence the orientation, quality, and properties of the synthesized graphene, we studied the interactions using angle-resolved photoemission spectroscopy. The evolution of both the Shockley surface state of the Cu(111) and the p band of the graphene was measured from the initial stage of CVD growth to the formation of a monolayer. Graphene growth was initiated along the Cu(111) lattice, where the Dirac band crossed the Fermi energy ($E_F$) at the K point without hybridization with the d-band of Cu. Then two rotated domains were additionally grown as the area covered with graphene became wider. The Dirac energy was about 0.4 eV and the energy of the Shockley surface state of Cu(111) shifted toward the $E_F$) by 0.15 eV upon graphene formation. These results indicate weak interactions between graphene and Cu, and that the electron transfer is limited to that between the Shockley surface state of Cu(111) and the p band of graphene. This weak interaction and slight lattice mismatch between graphene and Cu resulted in the growth of rotated graphene domains ($9.6^{\circ}$ and $8.4^{\circ}$), which showed no significant differences in the Dirac band with respect to different orientations. These rotated graphene domains resulted in grain boundaries which would hinder a large-sized single monolayer growth on Cu substrates.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.146.2-146.2
• /
• 2013

Copper is considered to be the most promising substrate for the growth of high-quality and large area graphene by chemical vapor deposition (CVD), in particular, on the (111) facet. Because the interactions between graphene and Cu substrates influence the orientation, quality, and properties of the synthesized graphene, we studied the interactions using angle-resolved photoemission spectroscopy. The evolution of both the Shockley surface state of the Cu(111) and the ${\pi}$ band of the graphene was measured from the initial stage of CVD growth to the formation of a monolayer. Graphene growth was initiated along the Cu(111) lattice, where the Dirac band crossed the Fermi energy (EF) at the K point without hybridization with the d-band of Cu. Then two rotated domains were additionally grown as the area covered with graphene became wider. The Dirac energy was about -0.4 eV and the energy of the Shockley surface state of Cu(111) shifted toward the EF by ~0.15 eV upon graphene formation. These results indicate weak interactions between graphene and Cu, and the electron transfer is limited to that between the Shockley surface state of Cu(111) and the ${\pi}$ band of graphene. This weak interaction and slight lattice mismatch between graphene and Cu resulted in the growth of rotated graphene domains ($9.6^{\circ}$ and $8.4^{\circ}$), which showed no significant differences in the Dirac band with respect to different orientations. These rotated graphene domains resulted in grain boundaries which would hinder a large-sized single monolayer growth on Cu substrates.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.2
• /
• pp.40.3-41
• /
• 2021

Minor mergers leave behind long lived, but extremely faint and extended tidal features including tails, streams, loops and plumes. These act as a fossil record for the host galaxy's past interactions, allowing us to infer recent accretion histories and place constraints on the properties and nature of a galaxy's dark matter halo. However, shallow imaging or small homogeneous samples of past surveys have resulted in weak observational constraints on the role of galaxy mergers and interactions in galaxy assembly. The Rubin Observatory, which is optimised to deliver fast, wide field-of-view imaging, will enable deep and unbiased observations over the 18,000 square degrees of the Legacy Survey of Space and Time (LSST), resulting in samples of potentially of millions of objects undergoing tidal interactions. Using realistic mock images produced with state-of-the-art cosmological simulations we perform a comprehensive theoretical investigation of the extended diffuse light around galaxies and galaxy groups down to low stellar mass densities. We consider the nature, frequency and visibility of tidal features and debris across a range of environments and stellar masses as well as their reliability as an indicator of galaxy accretion histories. We consider how observational biases such as projection effects, the point-spread-function and survey depth may effect the proper characterisation and measurement of tidal features, finding that LSST will be capable of recovering much of the flux found in the outskirts of L* galaxies at redshifts beyond local volume. In our simulated sample, tidal features are ubiquitous In L* galaxies and remain common even at significantly lower masses (M*>10^10 Msun). The fraction of stellar mass found in tidal features increases towards higher masses, rising to 5-10% for the most massive objects in our sample (M*~10^11.5 Msun). Such objects frequently exhibit many distinct tidal features often with complex morphologies, becoming increasingly numerous with increased depth. The interpretation and characterisation of such features can vary significantly with orientation and imaging depth. Our findings demonstrate the importance of accounting for the biases that arise from projection effects and surface-brightness limits and suggest that, even after the LSST is complete, much of the discovery space in low surface-brightness Universe will remain to be explored.

• Journal of the Korean Wood Science and Technology
• /
• v.15 no.3
• /
• pp.56-67
• /
• 1987

Plywoods used for construction as a decorative interior material are inflammable and can make fire accidents, causing destruction of human life and property. Therefore, it is indeed required to make fire-retardant treated plywood. In this study, 3.7mm yellow meranti plywoods were soaked in 18% boric acid solutions and tap water by hot-cold bath for 1/2, 2/2, 4/2, 6/2 hours and redrying of treated plywoods was carried out by press drying at the platen temperature of 110, 130, 160, $180^{\circ}C$ and then it was conducted to investigate solution absorption, drying rates, dynamic young's modulus. specific gravity and fire-retardant factors such as burning point, flame spread length. flame exhausted time, back side carbonized area and weight loss by treating time, treating solutions and platen temperature. The results are as follows; 1. When plywood was impregnated with the hot bath temperature of $70^{\circ}C$ for 1. 2, 4, 6 hours and the cold bath temperature of $15^{\circ}C$ for 2 hours respectively, retentions of boric acid were 1.565, l.597, 1.643, 1.709kg/$(30cm)^3$ and all of them exceeded the minimum retention [1.125kg/$(30cm)^3$] even in the shortest treatment. 2. In hot-cold bath method for 1/2 hours, the drying rates of treated plywood remarkably increased with the extension of platen temperature of 110, 130, 160, $180^{\circ}C$ and the values of boric acid treated plywood were 5.900, 10.196, 45.42, 54.958m.c%/min and the values of water treated plywood were 6.014, 12.373, 46.520, 55.730m.c%/min and drying rates of water treated plywood were faster than those of boric acid treated plywood. 3. The values of boric acid treated plywoods in dynamic young's modulus were widely higher than those of water treated plywoods. And it can be observed that there were highly significant differences for treating time between dynamic young's modulus, and the values of boric acid plywoods increased with the extension of treating time but on the contrary water treated plywoods were decreased values with prolonged time 4. It was observed that there were highly significant differences for platen temperature between dynamic young's modulus. When the values of water treated plywoods in dyna nic young's modulus were abruptly decreased according to the rise of platen temperature. boric acid treated plywoods showed rather increased values at $160^{\circ}C$ of platen temperature. And in 2- way interactions, there were also highly significant for dynamic young's modulus between treating time x treating solutions and platen temperature x treating solutions. 5. Correlation coefficients of fire-retardant factors were shown in table 5. It could be recognized that there were close correlations between the treating solutions and burning point, flame spread length, back side carbonized area, flame exhausted time and weight loss, but there was no correlation between fire-retardant factors and treating time and platen temperature. 6. From table 6, it can be observed that there were highly significant differences for burning point, flame spread length, flame exhausted time, back side carbonized area, weight loss between treating solutions. And in 2-way interactions, there were highly significant for burning point, flame spread length, weight loss between treating time $\times$ treating solutions.

• Journal of The Korean Association For Science Education
• /
• v.38 no.5
• /
• pp.611-623
• /
• 2018

This study investigated verbal behaviors and interactions in the processes of making written test items using paired think aloud problem solving for pre-service secondary chemistry teachers. The processes of making written test items using paired think-aloud problem solving in four small groups consisting of two pre-service chemistry teachers were recorded and transcribed. The analysis of the results revealed that 'item making' for ten subcategories for solver's verbal behaviors were most frequently exhibited regardless of 'integration' among the components of pedagogical content knowledge (PCK). The solver's 'provide', 'modify', 'require agreement', 'ask', 'agree', and 'justify' were also frequently exhibited although fewer than 'item making'. Especially, the solver's 'ask' was more frequently used in 'non-integration', whereas 'justify' was more frequently used in 'integration'. In listener's verbal behaviors consisted of eight subcategories, 'point out', 'ask', and 'agree' were frequently exhibited regardless of 'integration'. Listener's 'ask' and 'agree' were exhibited more in 'non-integration', whereas 'point out' was exhibited more in 'integration'. Many verbal interactions were analyzed to be in 'symmetrical type' more than 'solver-dominant type' or 'listener-dominant type'. 'Symmetrical type' was also more frequently exhibited in 'integration', whereas 'solver-dominant type' was more frequently exhibited in 'non-integration'. There were little differences between 'integration' and 'non-integration' in 'listener-dominant type'. In 23 subcategories of 'symmetrical type', 'ask-provide' and 'point out-justify' were most frequently found. Especially, 'ask-provide' was more frequently found in 'non-integration', whereas 'point out-justify' was more frequently found in 'integration'. 'Point out-modify' was the most frequent in 4 subcategories of 'listener-dominant type', while 'item making-agree' in three subcategories of 'solver-dominant type' regardless of 'integration'. However, only a little of other subcategories of the three types were found.