• 제목/요약/키워드: Point Vortex

검색결과 189건 처리시간 0.027초

순산소와 Vortex Aerator를 이용한 도심하천의 수질 및 악취 관리 (Urban Streams' Water Quality and Odor Control Using Pure Oxygen and Vortex Aerator)

  • 윤다인;최미정;박성혁
    • 대한토목학회논문집
    • /
    • 제41권5호
    • /
    • pp.493-504
    • /
    • 2021
  • 와류에 의해 물과 산소의 충돌을 반복적으로 일으켜 산소를 용존시키는 Multistage Vortex Aerator를 하천 정화에 적용하였다. 본 연구의 대상 현장인 괴정천은 부산시 사하구 도심을 흘러 낙동강 하구로 연결되는데, 우천 시에는 비점 오염물질이 유입되고 평시에도 하수 슬러지가 일부 유입되어 퇴적을 반복함에 따라 하천수의 용존산소 농도가 혐기성 상태에 가까웠다. 산소농도가 최소 0.1 ppm인 하천수를 흡입하여 22 ppm 이상으로 산소를 용존시켜 분당 1 m3을 순환시켰을 때, 하천에 나타나는 수질과 악취 변화를 2개월간 모니터링하였다. 운영 결과, 용존산소가 하천 전체적으로 약간 나쁨(4)~나쁨(5)에서, 좋음(1b)~보통(3) 등급으로 개선되었고, 총인 농도는 평균 76 % 감소되었다. 복합악취는, 하천 전체가 혐기화된 측정일에 최대 84.5 % 저감을 관찰할 수 있었다.

엇회전식 축류팬의 작동조건 변화에 따른 비정상 유동에 관한 실험적 연구 (Experimental Study on the Unsteady Flow under Various Operating Conditions of a Counter Rotating Axial Flow Fan)

  • 강현구;조이상;조진수
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2004년도 추계학술대회
    • /
    • pp.1389-1394
    • /
    • 2004
  • Experiments were done for the unsteady flow in a counter rotating axial flow fan near peak efficiency and stall point. Flow fields in a counter rotating axial flow fan were measured at cross-sectional planes of the upstream and downstream of each rotor. Cross sectional passage flow patterns were investigated through the acquired data by the $45^{\circ}$ inclined hot-wire. Comparison of flow characteristics between two different operating conditions such as tip vortex, secondary flow and turbulence intensity were performed through the analyses of axial, radial and tangential velocity distributions. As a result, tip vortex and secondary flows are enforced and measured obviously at stall point.

  • PDF

와법을 이용한 원주군을 지나는 후류의 특성 계산 (The Characteristic Calculation of the Wake through Cylinders by Vortex Method)

  • 노기덕;오세경;변용수
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제34권1호
    • /
    • pp.76-83
    • /
    • 2010
  • 본 연구는 정렬배열 및 엇갈림배열 상태에 놓인 원주군 주위의 유동장 특성을 와법으로 수치계산한 것이다. 계산은 피치 비 Pt/D=1.25~2.0, 레이놀즈 수 Re=$4.0{\times}10^1{\sim}4.0{\times}10^4$의 범위 내에서 각 유동장의 순간 볼텍스 분포, 순간 속도분포를 계산하였다. 정렬배열 및 엇갈림 배열 모두 각 원주의 상방에서는 시계방향의, 하방에서는 반시계방향의 볼텍스가 발생하였다. 각 배열 모두 원주군 후방에서 역류의 발생여부는 피치 비와 레이놀즈 수에 기인하며, 같은 레이놀즈 수에서는 피치 비가 작을수록, 그리고 같은 피치 비에서는 레이놀즈 수가 클수록 원주군 후방에서 역류발생이 쉽게 일어났다. 그리고 그 경계영역은 정렬배열의 경우 피치 비 Pt/D=1.5, 레이놀즈 수 Re=400~4,000, 엇갈림 배열의 경우 피치 비 Pt/D=1.4, 레이놀즈 수 Re=40~400에 존재했다.

원형 충돌 제트에서의 유동 및 온도 특성 (Flow and Temperature Characteristics in a Circular Impinging Jet)

  • 김정우;최해천
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2002년도 학술대회지
    • /
    • pp.237-240
    • /
    • 2002
  • In the present study, we perform LES of turbulent flow and temperature fields in a circular impinging jet at Re=5000 for two cases of H/D=2 and 6 (H denotes the distance between the jet exit and flat plate, and D does the diameter of the jet exit). In the case of H/D=2, the regular vortical structures observed in free jet do not exist because of the smaller distance than the potential core. The Nusselt number on the wall is largest at $r/D{\cong}10.67$ where vortex rings Impinge. At $r/D{\cong}1.5{\~}2.0$, the vortex rings induce the secondary vortices, resulting in a secondary peak in the Nusselt number there. In the case of H/D=6, the vortex rings change into three-dimensional vortical structures and the small-scale vortices impinge on the flat plate. The increase of turbulent intensity due to small-scale vortices results in the largest Nusselt number at the stagnation point.

  • PDF

Numerical Simulation of the Aeroacoustic Noise in the Separated Laminar Boundary Layer

  • Park, Hyo-Won;Young J. Moon;Lee, Kyu-Jung
    • Journal of Mechanical Science and Technology
    • /
    • 제17권2호
    • /
    • pp.280-287
    • /
    • 2003
  • The unsteady flow characteristics and the related noise of separated incompressible laminar boundary layer flows (Re$\sub$$\delta$/* = 614, 868, and 1,063) are numerically investigated. The characteristic lines of the wall pressure are examined to identify the primary noise source, related with the unsteady motion of the vortex at the reattachment point of the separation bubble. The generation and propagation of the vortex-induced noise in the separated laminar boundary layer are computed by the method of Computational Aero-Acoustics (CAA), and the effects of Reynolds number, Mach number and adverse pressure gradient strength are examined.

비정상 층류 경계층 박리에 의한 유동 소음 (Aeroacoustic Noise Generation in Unsteady Laminar Boundary-layer Separation)

  • 최효원;문영준
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 추계학술대회논문집B
    • /
    • pp.300-305
    • /
    • 2001
  • The unsteady flow structure and the related noise generation, which are caused by the separation of a two-dimensional, incompressible, laminar boundary-layer on the flat plate under the influence of local adverse pressure gradient, are numerically examined. The characteristic lines of the wall pressure are examined to understand the unsteady behavior of vortex shedding near the reattachment point of the separation bubble. Also, the generation and propagation of the vortex-induced noise in the separated boundary-layer are calculated by the method of computational aero-acoustics (CAA), and the effects of Reynolds number, Mach number and the strength of the adverse pressure gradient on the unsteady flow and noise characteristics are examined.

  • PDF

Vortex-in-Cell법에 있어 랜덤워크법에 의한 점성효과 (Viscous Effect by Random Walk Method in VIC Method)

  • 노기덕
    • 대한기계학회논문집B
    • /
    • 제26권2호
    • /
    • pp.194-200
    • /
    • 2002
  • A method for simulating flow of extremely low Reynolds number in a vortex-in-cell (VIC) was studied. The viscous diffusion was represented by the random walk method. The validity of this method was proven by applying it to the flows passing over a fence placed vertically at an extremely low Reynolds number. The effects of parameters of the VIC method on the random walk method, such as the number of point vortices, the mesh density and the time increment, were investigated by numerical analysis using a one-dimensional diffusion equation. Changes in the relative error of vorticity depending on those parameters were clarified.

국소교란이 가해지는 박리기포의 대형구조 (Large-Scale Structure of Leading-Edge Separation Bbubble with Local Forcing)

  • 김유익;성형진
    • 대한기계학회논문집
    • /
    • 제19권4호
    • /
    • pp.1134-1147
    • /
    • 1995
  • POD (proper orthogonal decomposition) is applied to turbulent leading-edge separation bubble to extract coherent structures. A two-dimensional leading-edge separation bubble is simulated by discrete-vortex method, where a time-dependent source forcing is incorporated. Based on the wealth of numerical data, POD is applied in a range of the forcing amplitude ( $A_{o}$ = 0, 0.5, 1.0 and 1.5) and forcing frequency (0 .leq. $f_{F}$H/ $U_{\infty}$.leq. 0.3). It is demonstrated that the structures of POD have noticeable changes with local forcings. In an effort to investigate the mechanism of decreasing reattachment length, dynamic behaviors of the expansion coefficients and contributions of the eigenfunctions of POD are scrutinized. As the forcing amplitude increases, the large-scale vortex structures are formed near the forcing amplitude increases, the large-scale vortex structures are formed near the separation point and the flow structures become more organized and more regular, accompanying with the reduction of reattachment length. By further inverstigation of POD global entropy, it is seen that the reattachment length is closely linked to the degree of organization of the flow structures.es.s.

종방향 와동이 유체유동 및 열전달 특성에 미치는 영향에 관한 실험적 연구 (An Experimental Study on the Effect of Fluid Flow and Heat Transfer Characteristics by the Longitudinal Vortices)

  • 양장식;김은필
    • 설비공학논문집
    • /
    • 제12권9호
    • /
    • pp.843-852
    • /
    • 2000
  • The flow characteristics and the heat transfer rate on a surface by interaction of a pair of vortices were studied experimentally. The test facility consisted of a boundary-layer wind tunnel with a vortex introduced into the flow by half-delta winglet protruding from the surface. In order to control the strength of the longitudinal vortices, the angles of attack of the vortex generators were varied from $\pm20\;degree\;to\;\pm45$ degree, but spacings between the vortex generators were fixed to 4 cm. The 3-dimensional mean velocity measurements were made using a five-hole pressure probe. Heat transfer measurements were made using the thermochromatic liquid to provide the local distribution of the heat transfer coefficient. By using the method mentioned above, the following conclusions were obtained from the present experiment. The boundary layer was thinned in the regions where the secondary flow was directed toward the wall and thickened where it was directed away from the wall. The peak augmentation of the local heat transfer coefficient occurred in the downwash region near the point of minimum boundary-layer thickness.

  • PDF

배관내 자유수면에서 와류현상에 대한 연구 (A study on the free surface vortex in the pipe system)

  • 오율권;장완호;이종원;김상녕
    • 대한기계학회논문집
    • /
    • 제16권11호
    • /
    • pp.2126-2135
    • /
    • 1992
  • 본 연구에서는 국내 원자력 발전소중 영광 3,4호기의 설계자료를 토대로 1/6 크기로 축소한 모델실험을 통해서 공기흡입이 발생하는 임계수위를 결정하는 상관식을 개발하였으며 또한 공기흡입구를 reducer type으로 개선함으로써 공기흡입을 방지할 수 있음을 밝혔다.