• Journal of the Korean Society of Costume
• /
• v.36
• /
• pp.1-23
• /
• 1998

The origin and structural development of Do-po have been studied with a consideration of the back piece of Do-po in this paper. This study found that Do-po was in this paper. This study found that Do-po was originally imported from China. This paper reports that an earlier record on Do-po is found in an epitaph(1564) than the record found in S njoSilnok(1607) which is conventionally known as the earliest record on Do-po. The structure of Do-po has been widely known as an“attachment of J n-sam”on slitted back piece of the outwear. However, this study shows that Do-po has been formed by inserting the gusset of the front piece into the back piece of the outwear Jik-nyung. This change can be considered as the economical and practical needs to save the cloth or by the aethetical need of simpler clothing. This study also classifies the shape of gussets largely into nine classes according to the temporal development in the shape of gussets.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1230-1231
• /
• 2007

2MW 풍력발전기용으로 사용할 영구자석형 동기발전기 물리설계 과정을 설명하다. 기어비가 72.28인 3단 기어를 사용하여 영구자석 pole을 회전자 표면에서 3 mm 깊이로 삽입시켜 안정된 구조를 취했다. 토크, 인덕턴스, 유기전압, 손실, 온도분포 등을 계산하기 위해 전자기해석과 열해석 등을 통해 영구자석, 회전자, 고정자 등의 구조를 정하고와 크기를 최적화시켰다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.133-133
• /
• 2009

Phospho-olivine $LiFePO_4$ and $LiTi_{0.1}Fe_{0.9}PO_4$ cathode materials were prepared by the solid-state reaction. To improve conductivity we carried out electrochemical performance of $Ti^{2+}$ doped $LiFePO_4$. The $Ti^{2+}$ doped $LiFePO_4$ started 3.36 V of flat voltage on discharge curve and showed a gentle decline in the curve compared to undoped $LiFePO_4$ without great changes of capacity. And so, we could achieve to improve electrochemical performance as reversible, cycle life. Similarly, $LiFePO_4$ doping with $Ti^{2+}$ was showed the effect of dopant which was obtained the improved discharge capacity as 140 mAh/g and good cycling performance.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.8
• /
• pp.927-934
• /
• 2015

In this paper, in order to prevent impulse surge PoE(Power Over Ethernet) communications error caused by natural phenomenon in industrial sites, countermeasure design of impulse surge of PoE communications equipment is suggested by designing dual impulse surge protection circuit. In order to analyze characteristic of impulse surge noise signal, surge generating device which meet international standard IEC 61000-4-5 is invented. And this device shows that surge signal is weakened by designing dual PoE power supply protection circuit by connecting surge generating device to the PoE data transfer line.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.137.1-137.1
• /
• 2011

올리빈 구조의 $LiFePO_4$ 정극 활물질은 $650^{\circ}C$에서 고상법으로 제조되었다. $LiFePO_4$의 전자전도도를 향상시키기 위하여 graphite nanofiber(GNF)를 각각 3wt%, 5wt%, 7wt%, 9wt% 첨가하여 $LiFePO_4$-C를 제조하였다. 제조된 분말의 입자 형태를 확인하기 위하여 X-ray diffraction(XRD)과 File Electronic Scaning Electromicroscopy(FE-SEM)를 측정하였다. XRD결과로부터 제조된 분말은 모두 순수한 결정 구조를 나타내었고 입자의 크기는 약 200nm였다. 5wt% GNF를 첨가한 $LiFePO_4$-C는 기타 첨가량에 비해 방전용량이 가장 높았다. 첫 사이클의 용량은 151.73mAh/g 나타났고 50 사이클 뒤에도 92% 이상을 유지하고 있었다. 첨가하지 않은 것에 비해 43% 증가하였다. $LiFePO_4$-C(3wt%), $LiFePO_4$-C(7wt%), $LiFePO_4$-C(9wt%)의 첫 사이클 방전용량은 각각 147.94mAh/g, 136.64mAh/g, 121.07mAh/g 나타났다. $LiFePO_4$-C(5wt%)에 비해 용량은 떨어쪘지만 순수한 $LiFePO_4$보다 많이 높았다. 임피던스 결과를 보면 기타 첨가량에 비해 $LiFePO_4$-C(5wt%)의 저항 제일 낮았다. 이는 충방전 결과와 일치하였다. graphite nanofiber의 첨가로 인하여 $LiFePO_4$ 정극 활물질의 전자전도도가 높아지고, 따라서 전기화학적 특성도 크게 향상되었다.

• Ocean and Polar Research
• /
• v.38 no.2
• /
• pp.139-148
• /
• 2016

The activity concentrations of $^{210}Po$ and $^{210}Pb$ within phytoplankton-zooplankton-anchovy-mackerel in the coastal water of the Jeju Island were determined to understand their distribution and bio-accumulation along the trophic level. In the surface water, the total activity concentrations of $^{210}Po$ and $^{210}Pb$ were $0.83{\pm}0.004mBq\;kg^{-1}$ and $1.27{\pm}0.03mBq\;kg^{-1}$. And the dissolved activity concentration of $^{210}Po$ and $^{210}Pb$ were $0.75{\pm}0.06mBq\;kg^{-1}$ and $1.22{\pm}0.09mBq\;kg^{-1}$ respectively. In the phytoplankton, the concentration factor (CF) of $^{210}Po$ and $^{210}Pb$ were $1.5{\times}10^5$ and $2.6{\times}10^4$ shows $^{210}Po$ is 5 times higher compared to $^{210}Pb$. The similar CF factor in the zooplankton of $^{210}Po$ was derived as $1.4{\times}10^5$. The CF of $^{210}Po$ in anchovy was increased twice compared to that in plankton. This is the evidence that there is $^{210}Po$ bio-magnification in the trophic level of plankton-anchovy. However the $^{210}Po$ activity concentration in the muscle tissue of mackerel was one-hundred times lower than that in anchovy. This reflects that in the trophic level of anchovy-mackerel, the bio-accumulation of $^{210}Po$ is decreased. The activity concentrations of $^{210}Po$ in the internal organs of anchovy and mackerel were 8 to 38 times higher than those in muscle tissues. In phytoplankton-zooplankton-anchovy, the CF of $^{210}Pb$ was decreased five times along the trophic level in order. In anchovy-mackerel it was decreased by 30-70%.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.2
• /
• pp.433-436
• /
• 2013

Carbon-coated $Li_3V_2(PO_4)_3-LiMnPO_4$ composite cathode materials are first reported in this work, prepared by the mechanochemical process with a complex metal oxide as the precursor and sucrose as the carbon source. X-ray diffraction pattern of the composite material indicates that both olivine $LiMnPO_4$ and monoclinic $Li_3V_2(PO_4)_3$ co-exist. We further investigated the electrochemical properties of our $Li_3V_2(PO_4)_3-LiMnPO_4$ composite cathode materials using galvanostatic charging/discharging tests, where our $Li_3V_2(PO_4)_3-LiMnPO_4$ composite electrode materials exhibit the charge/discharge efficiency of 91.9%, while $Li_3V_2(PO_4)_3$ and $LiMnPO_4$ exhibit the efficiency of 87.7 and 86.7% in the first cycle. The composites display unique electrochemical performances in terms of overvoltage and cycle stability, displaying a reduced gap of 141.6 mV between charge and discharge voltage and 95.0% capacity efficiency after $15^{th}$ cycles.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.3
• /
• pp.25-32
• /
• 2019

The core of the block chain technology is solving the problem of agreement on double payment, and the PoW, PoS and DPoS algorithms used for this have been studied. PoW in-process proofs are consensus systems that require feasible efforts to prevent minor or malicious use of computing capabilities, such as sending spam e-mail or initiating denial of service (DoS) attacks. The proof of the PoS is made to solve the Nothing at stake problem as well as the energy waste of the proof of work (PoW) algorithm, and the decision of the sum of each node is decided according to the amount of money, not the calculation ability. DPoS is that a small number of authorized users maintain a trade consensus through a distributed network, whereas DPS provides consent authority to a small number of representatives, whereas PoS has consent authority to all users. If PoS is direct democracy, DPoS is indirect democracy. This study aims to contribute to the continuous development of the related field through the study of the algorithm of the block chain agreement.

• Analytical Science and Technology
• /
• v.24 no.5
• /
• pp.378-386
• /
• 2011

The goal of this study is to understand the influence of temperature on phosphorus release rate from soil into water. As the temperature increases, $PO_4$-P reaches equilibrium more quickly and the equilibrium concentration increases, and thus the $PO_4$-P concentration increases, and pH decreases. The $PO_4$-P concentration affects pH. $PO_4$-P released from turbidity is not adsorbed onto the turbidity. $PO_4$-P was independent on the turbidity and yet $PO_4$-P was steadily increasing. However, $PO_4$-P was dependent upon the turbidity concentration as the turbidity releases $PO_4$-P. The total phosphorous (T-P) and turbidity were directly linked because T-P changed with the turbidity. T-P includes the $PO_4$-P content of water and the phosphorus content of the turbidity. As the temperature decreases, density of water increases, and the precipitation of turbidity decreases, resulting in an increases in T-P concentration. As the temperature increases, the T-P concentration decreases, but the PO4-P release rate from turbidity increases. At the same time, even at different temperatures, the T-P concentrations of the samples were about the same. When the lake gets deepened, the water temperature decreases, hence, the phosphorus release rate from soil into water was decreased. This mechanism is of great interest because phosphorus is released from soil sediment into the lake water.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.10
• /
• pp.1447-1452
• /
• 2011

Polyphenol oxidase (PPO) isoforms were partially purified from oyster mushroom (Pleurotus ostreatus) using various chromatography techniques, and their characteristics of heat stability, substrate affinity, optimum pH, and optimum temperature were investigated. Three PPO isoforms named PO-I, PO-II-1, and PO-II-2 were partially purified from oyster mushroom. The molecular weight of PO-II-1 was 70 kDa and PO-I and PO-II-2 were less than 6 kDa each. Characterization was carried out using a PPO isoform partially purified by hydrophobic interaction chromatography. Optimum temperature was $55^{\circ}C$ and optimum pH 5.0. However, the PPO was inactivated at neutral pH or by heating at $80^{\circ}C$ for 30 min, while the 40% PPO still remained active after heating at $60^{\circ}C$ for 45 min. The PPO isoform showed the highest substrate affinity to chlorogenic acid and pyrogallol, in which KM values were 1.01 and 2.06 mM, respectively. Therefore, these results suggested that the mushrooms should be stored at a pH higher than 7.0 and at a low temperature to prevent enzymatic browning.